W

Andrew Weston

321-***-****

adjagg@r.postjobfree.com

Hogansville, GA 30230

SUMMARY

Very rounded electrician!

SKILLS

Motor operations

Power and hand tools

Safety awareness

Blueprint and schematic interpretation

Diagnosis and troubleshooting

Mathematical ability

System repair and installation

Circuits and wiring

Electrical codes

Testing and diagnostics

Coordinating project schedules

Upgrade project completion

High voltage termination

Transformer, disconnect switch and ground grid testing

Hand and power tools

Installing equipment

AC and DC motor drives

Equipment maintenance

High voltage breaker testing and commissioning

Analyzing performance

Schematics interpretation

Identifying specifications

EXPERIENCE

Lead Electrician

Rockledge, FL

Infinity Electric Inc./ Aug 2019 to Aug 2020

Answered customers' questions about products, prices, availability, product uses and credit terms.

Assessed, tested and operated variety of electrical components and systems.

Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.

Reviewed and assessed electrical, mechanical and architectural diagrams and specifications.

Rectified issues with EMCS and variable frequency drive systems by troubleshooting and correcting problems.

Tested entire electrical assembly for performance levels and safety concerns.

Checked and troubleshot [Number] to [Number] volt equipment to identify and address concerns.

Drafted wiring layouts and developed plans for installation, selecting equipment and fixtures according to code and project specifications.

Maintained customer records using automated systems.

Interpreted schematics, blueprints and diagrams to complete projects on time.

Operated, set up and repaired equipment such as high-pressure boilers and large commercial air conditioning systems.

Directed electricians on installation, maintenance and repair on electrical wiring and equipment.

Responded to emergency callbacks and provided onsite support.

Reviewed diagrams and relevant codes to complete tasks safely and accurately.

Performed rough-in, termination and underground work.

Followed established safety practices when using tools and equipment.

Driven Electrician successful at working with customers, architects, contractors and sub-contractors on both residential and commercial projects. [Number]+ years in electrical work.

Corrected issues and installed new fixtures, wiring, circuits and motors.

Reviewed existing electrical systems for maintenance, repair and update requirements.

Replaced malfunctioning components for failing electrical setups.

Installed and maintained breaker panels for commercial and residential buildings.

Dug trenches and created holes to pull conduit and install supports.

Kept work areas clean, neat and free of hazards.

Raised quality control protocol, inspecting material for compliance.

Enthusiastic [Job title] driven to complete projects according to budget and schedule demands.

Troubleshot issues and developed effective solutions.

Seasoned Journeyman Electrician bringing [Number] years' experience working on existing building systems as well as new construction.

Results-focused Journeyman Electrician with [Number]-year track record of satisfied customers and contractors. Fully knowledgeable about installation, repair and codes.

Proficient Journeyman Electrician adept at mentoring junior electrical workers and training on correct safety procedures, building codes and finishing strategies. Motivational leader able to solve routine and complex problems with resourceful and experienced approach.

Talented Journeyman Electrician with expertise in layouts, installations and rough-in work. Familiar with fixtures and customer preferences. Methodical professional with meticulous attention to detail and efficient manner.

Laid out and sized components according to building specifications and user requirements.

Mentored junior electrical professionals on proper procedures.

This is a SUMMARY Proficient [Job title] knowledgeable about [Area of expertise] and [Area of expertise]. Excellent [Skill] and [Skill] abilities. Seeking to build on well-developed electrical knowledge and advance career in industry.

Led team of apprentice electricians through installing electrical systems and inspected existing circuits.

Examined and created solutions for high voltage electrical system problems.

Traced and diagnosed electrical malfunctions using hand tools and test equipment.

Built controllers and panels to complete system installations.

Verified measurements and made accurate cuts to avoid wasting materials on job sites.

Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.

Supported clients by interpreting drawings, wiring diagrams, flowcharts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.

Supported clients, interpreting drawings, wiring diagrams, flow charts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.

Completed semi-skilled and skilled work under supervision of fully qualified supervisors.

Drove project up-time, diagnosing malfunctions and removing defective parts while completing repairs to restore equipment.

Streamlined operational efficiencies, managing contractors, parts ordering for on-time implementation, job inspections, installations and staff scheduling to ensure under-budget project completion.

Enhanced customer satisfaction ratings, troubleshooting after-hour breakdowns for immediate repair.

Aided senior leadership by developing status documents on equipment maintenance and repairs.

Proactively channeled client feedback to create better solution plans.

Executed timely preventative maintenance, inspection and repairs on heat traces, [Type] splicers and [Type] cables.

Supervised electrical operation of [Number] employees, including maintenance, repair, testing and calibration of low voltage and high voltage electrical systems and equipment.

Reduced project lags, training revolving apprentice electricians on hands-on protocol, best practices and blueprint reading.

Eliminated project downtime by testing and installing pole breakers, CVTs and CTs, insulators and surge arrestors while terminating control wirings for breakers.

Constructed and installed electrical wiring and electronic components, including maintenance of all equipment.

Assembled and installed physical structures, electrical wiring and electronic components, including maintenance of all equipment from incoming power to component level with [Number] to [Number] volts.

Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.

Performed intricate glanding and terminating processes for breakers and motor control wirings while safely pole rigging [Type] cables using AWP.

Lead Electrician

Palmbay, FL

All Suncoast electrical/ Jul 2018 to Aug 2019

Reviewed diagrams and relevant codes to complete tasks safely and accurately.

Performed rough-in, termination and underground work.

Followed established safety practices when using tools and equipment.

Driven Electrician successful at working with customers, architects, contractors and sub-contractors on both residential and commercial projects. [Number]+ years in electrical work.

Corrected issues and installed new fixtures, wiring, circuits and motors.

Reviewed existing electrical systems for maintenance, repair and update requirements.

Enthusiastic [Job title] driven to complete projects according to budget and schedule demands.

Troubleshot issues and developed effective solutions.

Replaced malfunctioning components for failing electrical setups.

Installed and maintained breaker panels for commercial and residential buildings.

Dug trenches and created holes to pull conduit and install supports.

Kept work areas clean, neat and free of hazards.

Traced and diagnosed electrical malfunctions using hand tools and test equipment.

Verified measurements and made accurate cuts to avoid wasting materials on job sites.

Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.

Supported clients by interpreting drawings, wiring diagrams, flowcharts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.

Supported clients, interpreting drawings, wiring diagrams, flow charts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.

Completed semi-skilled and skilled work under supervision of fully qualified supervisors.

Executed timely preventative maintenance, inspection and repairs on heat traces, [Type] splicers and [Type] cables.

Raised quality control protocol, inspecting material for compliance.

Drove project up-time, diagnosing malfunctions and removing defective parts while completing repairs to restore equipment.

Enhanced customer satisfaction ratings, troubleshooting after-hour breakdowns for immediate repair.

Eliminated project downtime by testing and installing pole breakers, CVTs and CTs, insulators and surge arrestors while terminating control wirings for breakers.

Constructed and installed electrical wiring and electronic components, including maintenance of all equipment.

Increased project completion time, employing best practices when installing and maintaining cableways, conduits and control systems.

Assembled and installed physical structures, electrical wiring and electronic components, including maintenance of all equipment from incoming power to component level with [Number] to [Number] volts.

Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.

Performed intricate glanding and terminating processes for breakers and motor control wirings while safely pole rigging [Type] cables using AWP.

Lead Electrician

Satilight Beach, FL

Pingston electric/ Mar 2016 to Jul 2017

Performed rough-in, termination and underground work.

Followed established safety practices when using tools and equipment.

Driven Electrician successful at working with customers, architects, contractors and sub-contractors on both residential and commercial projects. [Number]+ years in electrical work.

Corrected issues and installed new fixtures, wiring, circuits and motors.

Laid out and sized components according to building specifications and user requirements.

Reviewed existing electrical systems for maintenance, repair and update requirements.

Enthusiastic [Job title] driven to complete projects according to budget and schedule demands.

Troubleshot issues and developed effective solutions.

Installed and maintained breaker panels for commercial and residential buildings.

Replaced malfunctioning components for failing electrical setups.

Dug trenches and created holes to pull conduit and install supports.

Kept work areas clean, neat and free of hazards.

Traced and diagnosed electrical malfunctions using hand tools and test equipment.

Built controllers and panels to complete system installations.

Verified measurements and made accurate cuts to avoid wasting materials on job sites.

Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.

Supported clients by interpreting drawings, wiring diagrams, flowcharts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.

Completed semi-skilled and skilled work under supervision of fully qualified supervisors.

Proactively channeled client feedback to create better solution plans.

Executed timely preventative maintenance, inspection and repairs on heat traces, [Type] splicers and [Type] cables.

Raised quality control protocol, inspecting material for compliance.

Drove project up-time, diagnosing malfunctions and removing defective parts while completing repairs to restore equipment.

Enhanced customer satisfaction ratings, troubleshooting after-hour breakdowns for immediate repair.

Reduced project lags, training revolving apprentice electricians on hands-on protocol, best practices and blueprint reading.

Eliminated project downtime by testing and installing pole breakers, CVTs and CTs, insulators and surge arrestors while terminating control wirings for breakers.

Increased project completion time, employing best practices when installing and maintaining cableways, conduits and control systems.

Assembled and installed physical structures, electrical wiring and electronic components, including maintenance of all equipment from incoming power to component level with [Number] to [Number] volts.

Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.

Performed intricate glanding and terminating processes for breakers and motor control wirings while safely pole rigging [Type] cables using AWP.

Lead Electrician

Satilight Beach, FL

PowerHouse Electric Inc./ Sep 2011 to Jul 2016

Performed rough-in, termination and underground work.

Followed established safety practices when using tools and equipment.

Reviewed diagrams and relevant codes to complete tasks safely and accurately.

Driven Electrician successful at working with customers, architects, contractors and sub-contractors on both residential and commercial projects. [Number]+ years in electrical work.

Corrected issues and installed new fixtures, wiring, circuits and motors.

Laid out and sized components according to building specifications and user requirements.

Reviewed existing electrical systems for maintenance, repair and update requirements.

Enthusiastic [Job title] driven to complete projects according to budget and schedule demands.

Troubleshot issues and developed effective solutions.

Replaced malfunctioning components for failing electrical setups.

Installed and maintained breaker panels for commercial and residential buildings.

Kept work areas clean, neat and free of hazards.

Traced and diagnosed electrical malfunctions using hand tools and test equipment.

Verified measurements and made accurate cuts to avoid wasting materials on job sites.

Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.

Supported clients by interpreting drawings, wiring diagrams, flowcharts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.

Completed semi-skilled and skilled work under supervision of fully qualified supervisors.

Executed timely preventive maintenance, inspection and repairs on heat traces, MI splicers, 5KV TECK cables and HV trailing cables.

Proactively channeled client feedback to create better solution plans.

Raised quality control protocol, inspecting material for compliance.

Drove project up-time, diagnosing malfunctions and removing defective parts while completing repairs to restore equipment.

Enhanced customer satisfaction ratings, troubleshooting after-hour breakdowns for immediate repair.

Optimized production safety and existing system quality, aiding management and engineering team on corrective action for process discrepancies.

Reduced project lags, training revolving apprentice electricians on hands-on protocol, best practices and blueprint reading.

Eliminated project downtime by testing and installing pole breakers, CVTs and CTs, insulators and surge arrestors while terminating control wirings for breakers.

Constructed and installed electrical wiring and electronic components, including maintenance of all equipment.

Assembled and installed physical structures, electrical wiring and electronic components, including maintenance of all equipment from incoming power to component level with [Number] to [Number] volts.

Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.

Performed intricate glanding and terminating processes for breakers and motor control wirings while safely pole rigging [Type] cables using AWP.

Lead Electrician

Melbourne, FL

Harbour Electric/ Jan 2008 to Aug 2011

Assembled and installed physical structures, electrical wiring and electronic components, including maintenance of all equipment from incoming power to component level with [Number] to [Number] volts.

Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.

Constructed and installed electrical wiring and electronic components, including maintenance of all equipment.

Enhanced customer satisfaction ratings, troubleshooting after-hour breakdowns for immediate repair.

Raised quality control protocol, inspecting material for compliance.

Verified measurements and made accurate cuts to avoid wasting materials on job sites.

Built controllers and panels to complete system installations.

Traced and diagnosed electrical malfunctions using hand tools and test equipment.

Kept work areas clean, neat and free of hazards.

Installed and maintained breaker panels for commercial and residential buildings.

Replaced malfunctioning components for failing electrical setups.

Troubleshot issues and developed effective solutions.

Enthusiastic [Job title] driven to complete projects according to budget and schedule demands.

Reviewed diagrams and relevant codes to complete tasks safely and accurately.

Lead Electrician

A&W Electric Feb 2006 to Aug 2008

Reviewed diagrams and relevant codes to complete tasks safely and accurately.

Performed rough-in, termination and underground work.

Followed established safety practices when using tools and equipment.

Seasoned Journeyman Electrician bringing [Number] years' experience working on existing building systems as well as new construction.

Results-focused Journeyman Electrician with [Number]-year track record of satisfied customers and contractors. Fully knowledgeable about installation, repair and codes.

Proficient Journeyman Electrician adept at mentoring junior electrical workers and training on correct safety procedures, building codes and finishing strategies. Motivational leader able to solve routine and complex problems with resourceful and experienced approach.

Driven Electrician successful at working with customers, architects, contractors and sub-contractors on both residential and commercial projects. [Number]+ years in electrical work.

Corrected issues and installed new fixtures, wiring, circuits and motors.

Talented Journeyman Electrician with expertise in layouts, installations and rough-in work. Familiar with fixtures and customer preferences. Methodical professional with meticulous attention to detail and efficient manner.

Laid out and sized components according to building specifications and user requirements.

Reviewed existing electrical systems for maintenance, repair and update requirements.

Enthusiastic [Job title] driven to complete projects according to budget and schedule demands.

Mentored junior electrical professionals on proper procedures.

Troubleshot issues and developed effective solutions.

This is a SUMMARY Proficient [Job title] knowledgeable about [Area of expertise] and [Area of expertise]. Excellent [Skill] and [Skill] abilities. Seeking to build on well-developed electrical knowledge and advance career in industry.

Led team of apprentice electricians through installing electrical systems and inspected existing circuits.

Replaced malfunctioning components for failing electrical setups.

Installed and maintained breaker panels for commercial and residential buildings.

Dug trenches and created holes to pull conduit and install supports.

Kept work areas clean, neat and free of hazards.

Traced and diagnosed electrical malfunctions using hand tools and test equipment.

Built controllers and panels to complete system installations.

Verified measurements and made accurate cuts to avoid wasting materials on job sites.

Elevated troubleshooting resolutions, verifying problems to aid with task completion and control installation quality.

Completed semi-skilled and skilled work under supervision of fully qualified supervisors.

Proactively channeled client feedback to create better solution plans.

Drove project up-time, diagnosing malfunctions and removing defective parts while completing repairs to restore equipment.

Supervised electrical operation of [Number] employees, including maintenance, repair, testing and calibration of low voltage and high voltage electrical systems and equipment.

Reduced project lags, training revolving apprentice electricians on hands-on protocol, best practices and blueprint reading.

Pro-actively channeled client feedback to create better solution plans.

Eliminated project downtime by testing and installing pole breakers, CVTs and CTs, insulators and surge arrestors while terminating control wirings for breakers.

Constructed and installed electrical wiring and electronic components, including maintenance of all equipment.

Increased project completion time, employing best practices when installing and maintaining cableways, conduits and control systems.

Assembled and installed physical structures, electrical wiring and electronic components, including maintenance of all equipment from incoming power to component level with [Number] to [Number] volts.

Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.

Performed intricate glanding and terminating processes for breakers and motor control wirings while safely pole rigging [Type] cables using AWP.

Helper/Lead Electrician

Orlando, FL

South East electric/ Mar 2001 to Feb 2006

Trained new employees on proper use of [Type] equipment to prevent accidents.

Volunteered to take on additional shifts during peak periods to keep projects with tight deadlines moving forward.

Inspected quality of finished products, making minor repairs to meet project expectations.

Attended all company-offered training sessions to improve skills and learn operation of new machines.

Troubleshot problems with equipment to make repairs or report diagnostics to supervisors.

EDUCATION AND TRAINING

High School Diploma

University High School May 2001

Orlando, FL

Contact this candidate