Manindra Nath Mishra

E-Mail: adj6zj@r.postjobfree.com

Mobile no. : +91-858*******

Current Location: Mumbai

Total Experience: 6 years and 1 months

SUMMARY OF SKILLS

Professional work experience in the field of Electrical, Instrumentation and Control Engineering in Industrial Automation &Refinery, Instrumentation & Electrical completion, Quality Control, Project Execution, Mechanical Completion, Erection, Commission, Testing and Handover Including Safety.

Understanding and making the single line diagram.

Switchboard panel Control & Power circuit Drawing reading and understanding.

Load list and I/O list as per project requirements.

100% Technical negotiation with vendor

70 to 80% Commercial negotiation.

GA drawing of MCC, JB and PLC panel.

TECHNICAL SUBMISSION FILE (Ex.- MOTOR, SWITCHGARE, INSTRUMENTS etc.)

Motor datasheet.

Installation, Testing and Commissioning of various instruments like primary radar, secondary radar, flow switch, density probe, vibrating fork level switch, additive injection block, differential pressure transmitter.

Panels Inspection, Panels & Consoles (PDB, PLC {ML & SM}, GMS, FAS, DBBV Master Control & Marshalling cabinet: Erection with high level accuracy and trouble-shoot.

Cable schedule and termination details planning, laying and termination power, control & signal cables from panels to instruments.

Cold loop checking of instruments followed by hot loop checking.

Testing of switchgear like MCCB, RCCB, relay, MCB and other electrical components

(switchgear) for commissioning different panels.

GIS maintenance Procedure.

Generator Protection system and GRP.

PLC installation, PLC programing

AC Drives installation and commissioning and troubleshooting.

Communication of PLC with drives and SCADA system through Profibus, Modbus.

Knowledge of medium voltage electrical switch gear system

Knowledge of electrical panel design system.

Industry standards for fabrication, erection and installation of Industrial instruments

UPS & Battery Bank: Erection with high level accuracy, maintenance, trouble-shoot and configuration.

Process control instrumentation & its calibration techniques

Load cell, proximity switch, level transmitter (radar type), thermistor, thermocouple, RTD (3wire), flow meter, vacuum transmitter.

Control Switch system, solenoid valve, reed switch, fork sensor, magnetic level indicator, magnetic level Switch

Transmitters (level, pressure, flow, temperature) conductivity analyzer, Modbus communication.

Limit switch setting and commissioning.

Make necessary arrangement with other engineers/specialist to overcome problem arising in the plant.

Preparation and submission of record book to the client upon the completion of project.

Communicating with the vendor for cost estimations and cost negotiations.

Commissioning of EOT crane system (pendant type) its control and motion limiting devices.

LRC, Gateway Server, Work Station, Terminal Server, CIU, Switches, Media Convertors, Printer

(Dot & Laser), SIL3 relays & barriers: Installation, configuration trouble-shoot and maintenance.

Termination of Motor(HT&LT), Motor testing (Motor checker, IR, Moisture observation, PI etc.)

Hi-Pot testing of HT cable.

Testing of Transformer (ratio/Magnetic balance etc.)

Monitoring and trouble, shooting of VFD.

Construction of Earth pit and Earth resistance measurement.

Electrical Safety, Isolation &Release procedure of breaker.

Electrical shock treatment plan

Manual Call Point, Smoke Detector, Hooter, Siren & ESD: installation, trouble-shoot, configuration and maintenance.

1. UNITOP AQUACARE PVT. LYD March 2019- Till Date (20 Months) ELECTRICAL AND INSTRUMENTATION ENGINEER(Project)

Clint’s and Key Responsibilities -

HMEL Bhatinda Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Transformer testing, Panel inspection.

PLC and SCADA installation, and programing uploading and checking. STERLITE

TECHNOLOGY

Aurangabad

Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Panel installation, jointing and inspection.

VFD installation, connection and commissioning

PLC and SCADA installation, and programing uploading and checking. USV Mumbai Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Panel installation, jointing and inspection.

VFD installation, connection and commissioning

PLC and SCADA installation, and programing uploading and checking. SI GROUP LOTE

CHIPLUN

Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Panel installation, jointing and inspection.

VFD installation, connection and commissioning.

PLC and SCADA installation, and programing uploading and checking. DEEPAK NOVACHEM

CHIPLIUN

Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Panel installation, jointing and inspection.

VFD installation, connection and commissioning.

PLC and SCADA installation, and programing uploading and checking. 2. YF INTERPRISES Sep 2016 - March 2019 (30 Months) ELECTRICAL AND INSTRUMENTATION ENGINEER

Clint’s and Key Responsibilities-

BPCL DURGAPUR

(HONEYWEL

PROJECT)

LT Panel installation, testing and commissioning.

Transformer installation, testing and Commissioning

Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Transformer testing, Panel inspection.

PLC and SCADA installation, and programing uploading and checking. IOCL MALDA LT Panel installation, testing and commissioning.

Transformer installation, testing and Commissioning

Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Transformer testing, Panel inspection.

PLC and SCADA installation, and programing uploading and checking. IOCL HASIMARA LT Panel installation, testing and commissioning.

Transformer installation, testing and Commissioning

Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Transformer testing, Panel inspection.

PLC and SCADA installation, and programing uploading and checking. NRL REFINERY SILIGURI LT Panel installation, testing and commissioning.

Transformer installation, testing and Commissioning

Cable laying, Cable testing, Motor Testing, Motor termination, No load test.

Instruments Installation testing and Commissioning.

Earth pit construction and testing

Loop test, Automation testing as per control philosophy,

Transformer testing, Panel inspection.

PLC and SCADA installation, and programing uploading and checking. 3. DMTECH PVT LTD. Aug 2014 - July 2016 (23 Months) ELCTRICAL AND SOFTWARE ENGINNER

Key Responsibilities

DM HOSPITAL Electrical wiring and testing for hospital equipment’s.

Software developer (Hospital management system)

ACADEMIC PROFILE

Year Institute Degree Division/Class

2014 Jadavpur University ME 1st

2010 Siliguri Institute of technology B.Tech 1st

2008 LHH School, Kolkata 12th 2nd

2006 High school Asi 10th 2nd

Training / Projects undertaken:

B.Tech 3rd

summer internship at DAMODAR VALLEY CORPORATION,BTPS for 3 weeks.

Training program on Automation for 2 weeks.

Training program on Introduction to industrial Electrical system at L&T switchgear Training center, Kolkata for 1 week.

Received training at Metro Railway (Kolkata) on entire metro railway functionality, power distribution, control gear system and its function on electronics card.

Received project based training on PLC and SCADA from Prolific System and Technologies Pvt. Ltd.

Received project based professional training on PLC,HMI and SCADA from Precon Automation & system Pvt Ltd.

Received training on project development, remote control, car washing. HMI TP 177B color DP flexible, development of Graphics downloading, software installation.

Attended training at West Bengal State Electricity Distribution Company Limited on transformers and energy meter.

M. Tech project titled “A study on operation and control of microgrid” under the guidance of Prof. SWAPAN KUMAR GOSWAMI & DR. SUNITA HALDER NEE DEY

o Design and simulation of Microgrig system.

o Design of control circuit.

THECHNICAL SKILL:

Programming Languages /Script : C,MATLAB

Operating System

Database

: WINDOWS,LINUX

: ORACLE PLSQL

Automation / Performance

Tools: o PLC

,SCADA,HMI

o MATLAB SIMULINK,AutoCAD

References: On request

Contact this candidate