CURRICULAM VITAE

*

• PERSONAL PROFILE:

A. NAME: SNIGDHA SAURAV MOHANTY

B. MOBILE NO: 958-***-****

C. SKYPE-ID: snigdha19951

D. E-MAIL ID: adj4m8@r.postjobfree.com

E. LINKED IN: https://www.linkedin.com/in/snigdhasauravmohanty/

• CAREER OBJECTIVE:

To succeed in an environmental growth and excellence in the organizational turnover which will provide me job satisfaction in the organization with self-development and help me to achieve the organizational goals and objectives.

• ACADEMIC DETAILS:

A. HIGH SCHOOL CERTIFICATE EXAMINATION: 1st division (84.00% Marks) in the Year-2010 from NAC High School under BSE, Odisha with Odia, English, Sanskrit, Mathematics, Science, and Social Science.

B. HIGHER SECONDARY EXAMINATION: 1st division (74.66% Marks) in the Year-2012 from Newton College of +2 Science, Sambalpur under CHSE, and Odisha with Science stream (Physics, Chemistry, Mathematics, Biology).

C. B. TECH: A Grade (73.20% Marks; Electrical Engineering) in the Year-2016 from KIIT University, Bhubaneswar.

D. MANAGEMENT PROGRAMME: A Grade & Continuing (Operational Management) in the Year- 2020-2021 from IGNOU, New Delhi.

• TRAINING DETAILS:

A. POWER TRANSMISSION LINE CONSTRUCTION MANAGEMENT: From Teams Transmission Line Academy, Chennai in the period from 08.05.2014 to 24.05.2014. B. POWER TRANSMISSION & DISRIBUTION: From Odisha Power Transmission & Corporation Limited, Bhubaneswar, and Odisha in the period from 09.06.2014 to 08.07.2014. C. POWER PLANT FAMILARISATION: From National Thermal Power Corporation Limited, Talcher, Kaniha, Odisha in the period from 06.05.2015 to 05.06.2015. D. PACK’ELEC BUILDER (ELECTRICAL CAD PACKAGE): From Algo’Tech India Pvt. Ltd, Noida in the period from 20.01.2016 to 20.06.2016.

E. Surfer BUDDY by HYREL INC. (Material Stock Management): From AMS INDIA Pvt Ltd. During March 2020.

F. 3D Printing & Installation: - Hyrel - AMS built 3D print detailing, building, assembling and Customer installation experience.

CURRICULAM VITAE

2

• TECHNICAL SKILLS:

A. MATLAB SIMULATION(BASICS): From KIIT University, Bhubaneswar, Odisha in the Year- September-2014

B. INDUSTRIAL AUTOMATION: From Central Tool Room & Training Centre (Ministry of MSME) Bhubaneswar, Odisha in the Year-June-2015

C. AUTO CAD ELECTRICALS: From CADD Centre, Noida, Sec-18 in the Year-January-2018 D. HYREL 3D (SURFER BUDDY): - From AMS India during March 2020 E. HYREL 3D PRINTER: - 3D PRINTER detailing

• OTHER PARTICIPATIONS:

A. WISSENAIRE 2014-January 2014 From-IIT, BHUBANESWAR B. MSYS-BIOMETRIC WORKSHOP-January 2014 From-ABLAB Solutions C. KSHITIJ 2014-February 2014-from IIT, Kharagpur

D. Participant of STATE-LEVEL-RED CROSS CAMP

• PREVIOUS WORKS AND PERFORMANCE:

PROJECT ENGINEER (4 yr. 1 month); ALGO’TECH INDIA PVT. LTD. A. PROJECT (MC BRIDE): Drafting of Electrical layout of the facility, Creation of Electrical Schematics (Power, Command and Report Associated). B. PROJECT (ASF): Drafting of Automation part of the schematics, Redraw schematics of Three Phase distribution.

C. PROJECT-VEOLIA EAU 69 (WATER TREATMENT PLANT UNDER VINCI) FIRST CONTRACT: Update the Cabinet diagram of a water treatment plant with the power and command drawing. D. PROJECT-VEOLIA EAU SECOND CONTRACT: Update the Cabinet diagram of a water treatment plant with the BOM.

E. PROJECT-VEOLIA THIRD CONTRACT: Redraw entire circuit; consist of power, command and automation of water treatment plant.

F. PROJECT-SNCF (TTMVT & TTAB): The Railway network of France; Job is to recognize the circuit and redraw and digitize the old layout by CAD.

G. PROJECT (SNEF HCL): - To recover and digitize the Hospital of Lyon in France as per the specification described.

H. PROJECT (FAMAR): To draw the entire electrical layout of the maintenance unit of FAMAR

(Health sector).

I. PROJECT (SNCF Z800): To draw the electrical layout and prepare the BOM for the SNCF (Railway network of France).

J. PROJECT (SNEF HCL MODIFICATION): - To redesign the building structure of Hospital in Lyon, France through Excel and CAD.

K. PROJECT (APHP HUPIFO): - To redesign the building structure of Paris Ile-de-France University Hospitals, France through Excel and CAD.

CURRICULAM VITAE

3

L. PROJECT (CHRU TOUR): - To recover the electrical design of Centre Hospitaller Regional Universitaire de Tours, France through Excel and CAD. M. PROJECT (UNIVERSITE DE RENNES): - To put and assign the specification from PDF to Electrical spread sheet of UNIVERSITE DE RENNES, France through Excel. N. PROJECT (UNIVERSITÉ DE GRENOBLE): - To draw and assign the specification from PDF to Electrical spread sheet of UNIVERSITÉ DE GRENOBLE, France through Excel and CAD. O. PROJECT (HCL-GHE): - To draw and assign the specification from PDF to Electrical spread sheet of HCL-GHE, France through Excel and CAD.

• ELECTRICAL ENGINEER IN AMS INDIA PVT. LTD (1 Year):

Responsible for support, training, commissioning & troubleshooting of AMS - HYREL 3D printing machine.

The Hydra 16A-S (standard) has a 250mm Z and stands on the floor, with the following options:

• Can take a bed at 400x300mm or 600x400mm at 120 C or 200 C, or a sub-ambient bed.

• Can take the 40W CO2 laser and 5W, 450nm diode laser.

• Can take the Pick and Place setup; and

• Can take the 3-Phase and 1-Phase spindle tools.

The Hydra 16A-T (tall) has a 500mm Z and stands on the floor, with the following options:

• Can take a bed at 400x300mm or 600x400mm at 120 C or 200 C, or a sub-ambient bed.

• Can take the 5W, 450nm diode laser (NO CO2 LASER).

• Can take the Pick and Place setup; and

• Can take the 3-Phase and 1-Phase spindle tools.

The Engines

Engines are open-air models. Engines can take up to four heads at once, either working cooperatively on a one print, or making duplicate copies of a small print at the same time. Build volume is 200mm x 200mm x 200mm (X/Y/Z). Detailed information is on the Engines page.

• Filament Extruder Machine - A set up Combines Motor, Control Box, Barrel Heater, Water chamber which converted Granules of various material in to Filament that is used for 3D Printer to print at a certain temperature, speed along with uniform diameter.

• Installation, Commionsioning and training of AMS-HYREL 3D PRINTER conducting at Centurion University of Technology & Management, Bhubaneswar & Central Tool Room & Training Centre, NITOT Campus Bhubaneswar.

CURRICULAM VITAE

4

• OTHER RESPONSIBILITIES OVERALL:

Responsible for execution of Applications for Design Software Solution in India.

End to End solution with updating needs inside the software by Client Interaction, Opportunities, and Quotations.

Responsible for execution of projects conduct globally.

Understanding customer's ongoing requirements and suggesting them with the right solutions from the wide range of Algo’Tech &AMS India’s products.

Helping Sales activities by answering technical queries to Clients.

Performing both Online and On-site presentation of Product.

Necessary support, execution of training and Post-Sales activities.

Attending client’s technical queries and necessary modifications performed as per instruction.

Participating in developing various IoT application & coordinating with Hyrel 3D Printing activity.

Control wiring of Panel through drawing.

CURRICULAM VITAE

5

• CUSTOMER APPRECIATION:

CURRICULAM VITAE

6

CURRICULAM VITAE

7

CURRICULAM VITAE

8

CURRICULAM VITAE

9

• HOBBIES:

o Visit Spiritual Places.

o Internet surfing.

o Participate in Socio-cultural events.

o International Language and Culture learning. (French basic & elementary level) o To be updated with daily news.

• DECLARATION:

I consider myself familiar with Electrical Engineering aspects with update knowledge in corporate world. I am also fully confident in my ability to work in a team taking responsibility. I hereby declare that the information furnished above is true to the best of my knowledge. Current Location: Bangalore

Contact this candidate