Narendran B
Engineer- Testing
Testing Engineer with 8+ years of experience of excellent technical communication skills
,collaborative team work abilities and test programs for (GIS /AIS) Station in Operation & Maintenance of ( Medium Voltage System) Contributes to company production engineering objective, new product introduction and process improvement goals.
Professional Experience
2015/10 -
Current
Testing Engineer
Alfanar Testing & Commissioning,Riyadh, Kingdom of Saudi Arabia (KSA)
Delegated to tasks closely monitor work to high quality, maintain speed and exceed
Surveyed potential project sites before design, checking for space restrictions, mechanical feasibility and manufacturers guidelines
Designs to maintain customer satisfaction and guarantee long-lasting, high
Planned, designed and performed manual and functional project testing and reported defects
Applied advanced skill to resolve complex problems not covered by existing procedures or practices
Contributed to project plans by providing time
estimates
Assessed operating
maximize performance and equipment longevity
Organized and directed maintenance shutdowns and startups
Thoroughly cleaned and lubricated parts to keep
Electrical equipment operating at peak performance
Performed trouble
electrical equipment, including
MV & Protection panels
Defined engineering problems, collected data,
established facts and drew conclusions to solve
engineering issues
Maintained safe wo
and regulations
Reviewed calculations and analytical data to mainta accuracy of technical report
B
+ years of experience of excellent technical communication skills
,collaborative team work abilities and test programs for (GIS /AIS) Station's, Methodical Experiences Maintenance of ( Medium Voltage System) & Calibration of Electrical Equipment's . Contributes to company production engineering objective, new product introduction and process Professional Experience
Contact
Testing & Commissioning,Riyadh, Kingdom of
Delegated to tasks closely monitor work to high quality, maintain speed and exceed daily project goals
Surveyed potential project sites before design, checking for space restrictions, mechanical feasibility and manufacturers guidelines
Designs to maintain customer satisfaction and guarantee lasting, high-quality work
ed and performed manual and functional
project testing and reported defects
Applied advanced skill to resolve complex problems not covered by existing procedures or practices
Contributed to project plans by providing time-scale Assessed operating conditions and adjusted settings to maximize performance and equipment longevity
Organized and directed maintenance shutdowns and
Thoroughly cleaned and lubricated parts to keep
Electrical equipment operating at peak performance Performed troubleshooting and repair for complex
electrical equipment, including, Switch gears of EHV &
& Protection panels,Transformers
Defined engineering problems, collected data,
established facts and drew conclusions to solve
engineering issues
Maintained safe working environment by enforcing rules Reviewed calculations and analytical data to maintain accuracy of technical report
1/519A Gandhinagar,
Konamoolai,
Sathyamangalam,
Erode,Tamilnadu
India
Pin-638402
Mobile No: +91
Email:
Linked in:
https://www.linkedin.com/in/nare
ndran-
Passport No :
Date of Issue : 11/03/2015
Date of Expiry :
Bachelor of Electrical & Electronics
Engineering,
Graduated in March 2011
Anna University,
DMI college of Engineering
Chennai
Tamil Nadu
*Graduated First Class
+ years of experience of excellent technical communication skills
, Methodical Experiences
Calibration of Electrical Equipment's .
Contributes to company production engineering objective, new product introduction and process Contact Address
1/519A Gandhinagar,
Konamoolai,
Sathyamangalam,
Erode,Tamilnadu
638402
Mobile No: +91-944*******
Email: adj2mp@r.postjobfree.com
Linked in:
https://www.linkedin.com/in/nare
-b-25871834/
Passport No : M7133885
Date of Issue : 11/03/2015
Date of Expiry : 10/03/2025
Education
Bachelor of Electrical & Electronics
Engineering,
Graduated in March 2011
Anna University,
DMI college of Engineering
Chennai-600123,
Tamil Nadu
*Graduated First Class
2012-03-
2015-06
Senior Protection Engineer
Voltech engineers pvt ltd
Evaluated and understood work specifications, drawings and technical manuals to produce high
Established test procedures to review durability, reliability and performance of all systems
Followed standard checklists to perform complete and thorough evaluations
TESTING OF ELECTRICAL EQUIPMENTS:
Configuration and testing of AREVA, ABB, SIEMENS, GE, SEL and SEPOM relays.
220KV, 132KV, 33KV, 11KV Sf6, VCB, Breakers,
Isolators.
Commissioning of motors up to 1400kw Make:
ABB.BHEL
Power Transformer up to 240 MVA.
Microprocessor Relays and Static relays (Over
current/Earth fault relays, all auxiliary Relays, Differential relays, Distance Relays and Neutral Displacement
relays.)
Current Transformers (Insulation resistance test, Winding resistance Measurement, Polarity, Ratio test, Sensitivity test, Stability test, Knee Point Voltage Test.)
Potential Transformer (Insulation resistance test, Winding resistance Measurement, Polarit
Power transformer (Insulation resistance test, Winding resistance Measurement, Magnetic balance, Magnetizing current, vector group, short circuit test.)
Energy meters, Transducers, Voltmeters and Ammeters.
Hi Pot for Bus bars, HT & LT
Managed escalations from direct reports during testing and commissioning phase of project
Confirmed testing software met future system
requirements
Provided device testing, including writing testing, monitoring progress, and recording defects
Developed organizational processes, job results and accurate forecasts necessary to reach projected
milestones
Logged device failures caused by unexpected reactions during testing
Analyzed, troubleshooting software problems and
communicated possible solutions w
Senior Protection Engineer
Voltech engineers pvt ltd,Chennai, Tamil Nadu, India Evaluated and understood work specifications, drawings and technical manuals to produce high-quality work Established test procedures to review durability, reliability and performance of all systems and parts
Followed standard checklists to perform complete and thorough evaluations
TESTING OF ELECTRICAL EQUIPMENTS:
Configuration and testing of AREVA, ABB, SIEMENS,
GE, SEL and SEPOM relays.
220KV, 132KV, 33KV, 11KV Sf6, VCB, Breakers,
ommissioning of motors up to 1400kw Make:
Power Transformer up to 240 MVA.
Microprocessor Relays and Static relays (Over
current/Earth fault relays, all auxiliary Relays, Differential relays, Distance Relays and Neutral Displacement
Current Transformers (Insulation resistance test, Winding resistance Measurement, Polarity, Ratio test, Sensitivity test, Stability test, Knee Point Voltage Test.)
Potential Transformer (Insulation resistance test, Winding resistance Measurement, Polarity, Ratio Test.) Power transformer (Insulation resistance test, Winding resistance Measurement, Magnetic balance, Magnetizing current, vector group, short circuit test.)
Energy meters, Transducers, Voltmeters and Ammeters. Hi Pot for Bus bars, HT & LT Cables
Managed escalations from direct reports during testing and commissioning phase of project
Confirmed testing software met future system
Provided device testing, including writing testing, monitoring progress, and recording defects
oped organizational processes, job results and
accurate forecasts necessary to reach projected
Logged device failures caused by unexpected reactions Analyzed, troubleshooting software problems and
communicated possible solutions with development team
SIEMENS Relay Configuration
Software,
AREVA Relay Configuration
Software,
ABB Relay Configuration
Software,
GE Relay Configuration
Software
SEPOM Relay Configuration
Software.
SEL Relay Configuration
Software.
Testing of relays with
OMICRON,MEGGER & DOB
Test Equipment
Good in
troubleshooting
communication skills
interpretation
testing
and repair
Safety pr
reparative
Languages
Tamil
English
Hindi
Arabic
Certifications
2012-03
Electrical safety & first aid
Conducted by Advanced Training
institute
Skills
SIEMENS Relay Configuration
Software,
AREVA Relay Configuration
Software,
ABB Relay Configuration
Software,
GE Relay Configuration
Software
SEPOM Relay Configuration
Software.
SEL Relay Configuration
Software.
Testing of relays with
OMICRON,MEGGER & DOBLE
Test Equipment
Good in Technical
troubleshooting, Technical
communication skills, Schematic
interpretation, Experimental
testing, Equipment maintenance
and repair, Root cause analysis,
Safety procedures, Preventive
reparative maintenance
Languages
Tamil - Native
English - Native
Hindi - Novice
Arabic - Novice
Certifications
03
Electrical safety & first aid
Conducted by Advanced Training
institute Government of India
Accomplishments:
PROJECTS HANDLED IN INDIA.
1. Testing and commissioning: 220kv,132kv switchyard, 11kV and 415V switchgear panel. a. CUSTOMER: TATA STEEL Ltd-KALINGANAGAR,-JOJPUR, ORISSA INDIA. 2. Testing and commissioning: 1*370MW POWER PLANT 415V switchgear panel. a. CUSTOMER: BOKARO STEEL PLANT (SAIL)-BOKARO,-JHARKHAND, INDIA. 3. Configuration and testing of relays AREVA (P122,P220,P921) a. CUSTOMER: TATA IRON AND STEEL CO ltd, JAMSHEDPUR-JHARKHAND, INDIA
.
4. Configuration and testing of relays AREVA (P143,P122,P220,P141,P632,P921,P127) a. CUSTOMER: USHA MARTIN Ltd, JAMSHEDPUR- JHARKHAND, INDIA. 5. Configuration and testing of relays AREVA (P632, P543, P141, P243.) a. CUSTOMER: SAIL- Rourkela Steel Plant (RSP), located in Rourkela, Odisha, INDIA. 6. Configuration and testing of relays ABB (REM 545) and AREVA (P241) a. CUSTOMER: THARANI SUGARS, KALLAKURICHI, INDIA.
7. Configuration and testing of relays AREVA (P443) a. CUSTOMER: Andhra Pradesh State Electricity Board-MAKHTAL, ANDRA PRADESH, INDIA.
8. Configuration and testing of relays AREVA (P143,P243,P241,P141,P632,P921) a. CUSTOMER: JP-NIGREE,MADHYA PRADESH, INDIA.
9. Configuration and testing of relays SEL (751A,787,710) a. CUSTOMER: Uttar Pradesh Power Corporation Limited(UPPCL)-SINGROLI, UTTAR PRADESH, INDIA.
10. Configuration and testing of relays AREVA P143 P122 P220,GE 650,GE 339 GE 350 a. CUSTOMER: 2*660MW THERMAL POWER PLANT(GMR) TILDA,RAIPUR- CHHATTISGARH
11. Configuration and testing of relays SIEMENS 7SA522 7UT512 a. CUSTOMER: 132KV/33KV SUB STATION SONBARSHA,BIHAR 12. Configuration and testing of relays ABB (REF 615) (REM 615) a. CUSTOMER: RAJASTHAN RAJYA VIDYUT UTPADAM NIGAM Ltd- CHABRA,INDIA. 13. Configuration and testing of relays SIEMENS 7SJ610,7SD610,7UT512 a. CUSTOMER: CHENNAI METRO RAIL PROJECT- KOYAMBADU, CHENNAI,INDIA. 14. Configuration and testing of relays ABB (REF 615) (REM 615) (RET615) (SPAJ140C) a. CUSTOMER: 4*360 MW RKM POWER GEN – KORBA, CHHATTISGARH, INDIA. 15. Configuration and testing of relays AREVA (P632) (P120) (P521) (P139) (P122) (P127) (P922) a. CUSTOMER: 132KV/33KV SUB STATION BORL CPP PLANT, BINA, M.P,INDIA Accomplishments:
PROJECTS HANDLED IN KSA(Saudi Arabia).
1. Maintenance of Medium Voltage System : SEC(Saudi Electricity Company) Al-Qassim, & Riyadh Province Substations 33kV and 13.8kV switchgear panel. 2. Maintenance of Medium Voltage System : Imam Saud university Riyadh,13.8kV switchgear Panel
&Transformers.
3. Operation & Maintenance of Medium Voltage System : Princess Nora University, Riyadh,13.8kV switchgear Panel &Transformers .
4. Retrofitting of AMI & AMR System : SEC(Saudi Electricity Company) Al-Qassim, Riyadh Substations 380kv,132kv, 33kV and 13.8kV
5. Calibration of Electrical Equipments : HighvoltageSystem,Standard Capacitors,Current Test Bench,Timers, & Electrical Test Equipments
.
Place: sincerely yours
Date: (NARENDRAN B)