Page * of *

PERSONAL INFORMATION

Address Katip Mustafa Chelebi Area, Billurcu street, No:6/1,

Beyoglu (34433), Istanbul, Turkey

Phone +90-539-***-**-**

Email adj162@r.postjobfree.com

Place & Date of Birth Tabriz, Iran- 22 Nov 1986

Marital status Single Military course Completed

Nationality Iran Passport No F46186179

Residence Turkey ID No 997********

EDUCATION

Bachelor Degree Jul 2005-May 2009,Electrical & Electronics Engineering, Faculty of Engineering at Azad University of Karaj, Iran; scored: 14:62 of 20:00

(www.kiau.ac.ir)

High School Diploma Jul 2001-May 2005,Mathematics & Physics, Math high school of Robatkarim, Tehran, Iran; Scored: 18.01 of 20.00

PERSONAL SKILLS AND HOBBIES

Language(s) Levels: A1/2: Basic user- B1/2:Independent user- C1/2:Proficient user Speaking Listening Reading Writing Certification

English B2 B2 B2 B2 IELTS

Turkish C1 C1 B2 B2 Yes

Farsi C2 C2 C2 C2 Native

Azerbaijani C2 C2 B2 B2 Mother tongue

Arabic A2 A2 A2 A2 No

Communication

Skills

- Good Communication Skills through my experiences as a team member.

- Very good and Reasonable reactions in the face of Special cases and Problems

(demanding/ angry/ rushing or…)

Organizational/

Managerial Skills

- Ability to work with people whom may they have had different backgrounds.

- Ability to work in a team conditions or independently.

- Ability to work for long hours and also under pressure of work.

- Ability to learn more and more.

Job-related

Skills

- Time management and doing my responsibilities as well.

- Marketing and also suitable behavior and professional relations with Clients.

- Clever and fast learner.

Professional

Job Skills

- Electrical & Electronics (Hardware and software; mentioned in Capabilities and experiences Details)

- Industrial Automation & Controls & Instrumentation (Hardware and software; mentioned in Capabilities and experiences Details)

- Industrial Electric & Installation (Hardware and software; mentioned in Capabilities and experiences Details)

Entertainment

& Hobbies

- Doing sports such as football, swimming, driving.

- Listen to music; just as a fan of music.

- Surfing and searching through the internet; keep to updating my knowledge. Page 2 of 5

JOB EXPERIENCE(S): ( JAN 2009-MAY 2020)

NO Date(s)

Duration

(month)

Position Organization Title Reason of cut off References 11 Jul 2020-

up to now

7 Electric and

electronic

engineer

Nacibey Makina Design and

produce of

machines

Go on up to now Istanbul, Turkey

www.sarfistanbul.com

- May 2020 1 Gap in Employment due to Covid 19

10 Aug 2019-

May 2020

10 Management

(self_employed)

İstanbul Merit

House

Hotel,

Tourism

Covid 19 Istanbul, Turkey

www.booking.com/istan

bul_merit_house

9 Dec 2018-

Aug 2019

8 Marketing

employee and

receptionist

Galataport Hotel

The little hotel

White house

Hotel,

Tourism

Self-employment in

my own business

Istanbul, Turkey

www.booking.com/galat

aport hotel

8 Oct 2018-

Dec 2018

2 Technician,

Engineer

Schindler Group Elevator,

Escalator

Difficulty writing and

reading Turkish

Kyrenia, Cyprus

www.schindler.com

- Sep 2018 1 Gap in Employment due to Immigration and have been leaving origin country. 7 Dec 2014-

Aug 2018

44 Marketing

employee and

Supervisor

Cargoatlas Int. Co

(Logistic, Cargo)

International

Transportatio

n

Economic problems

of the country and

decision to emigrate

Tehran, Iran

www.cargoatlas.ir

6 Aug 2014-

Dec 2014

4 Electronics

Repairman

Taba Electronics Electronic

Appliances

Starting a partnership

with a close friend

Tehran, Iran

www.tabaelectronic.com

5 Jan 2013-

Aug 2014

19 Maintenance

and

Repairman

Gerad Co. Produce of

Cloths

Low salaries Tehran, Iran

www.gerad.ir

4 Oct 2012-

Jan 2013

3 Industrial

Automation

Engineer

Akhavan Jam Co. Produce of

Appliances

Very difficult

commute, because of

the long way

Tehran, Iran

www.akhavan.ir

- Sep 2012 1 Gap in Employment because of Family.

3 May

2011- Aug

2012

16 Instrumentatio

n Engineer

Bandar Abbas

Petroleum site

Oil and

Petroleum

End of the contract Bandar Abbas, Iran

www.icesi.ir

- Mar 2011 2 Gap in Employment due to starting Military course. 2 Feb 2010-

Feb 2011

12 Electronics

Designer and

Engineer

Tavan Azmayan

Co.

Produce of

Electronic

Boards

Go to military course

of the country

Tehran, Iran

www.taavan.com

1 Jan 2009-

Feb 2010

13 Quality

Control

Jahan Ava

Industrial Group

Electric

Appliances

Another job, more

related to education

Tehran, Iran

(Paran industrial town)

COURSE(S) & TRAINING

Tittle Date, hours Organization Certification

PLC Technician

(Programmable Logic

Controller)

May 2011-Jul 2011

274 hours

Technical & Professional training Organization

of Bandar Abbas city, Iran

(www.hormoztvto.ir)

Yes

Instrumentation Devises

Technician

May 2011-Oct 2011

600 hours

Technical & Professional training Organization

of Bandar Abbas city, Iran

(www.hormoztvto.ir)

Yes

Industrial Electric systems

Technician

Jan 2012-Sep 2012

1090 hours

Technical & Professional training Organization

of Bandar Abbas city, Iran(www.hormoztvto.ir)

Yes

Elevator Microprocessors

Controllers (LC/Logical

Controllers)

May 2009-Jul 2009

270 hours

Farmand Asanbar Co. of Karaj, Iran

(http://farmandasanbar.fa.namayeshgah.com)

Yes

LG Television systems &

Sony LCD, Plasmas

Oct 2008-Dec 2008

168 hours

Shahab Electric Co. of Karaj/Tehran Highway

(www.shahabco.ir)

Yes- Graduation

training course

Page 3 of 5

Membership of Construction

Engineering Organization

Dec 2011-Sep 2018

About 7 years

Construction Engineering Organization of Iran

(www.tceo.ir)

Yes

Home Automation & BMS

(Building Management Systems)

Oct 2012-Oct 2012

30 hours/5 days

GIRA & KNX Products Group of Esfahan, Iran

(www.raymonco.com)

No

PROJECT(S) PARTICIPATED

- Activity as a Control and instrumentation engineer and completed various projects in Bandar Abbas Petroleum Site, Iran.

- Manufacture and calibration of different electronic transducers for Mazandaran electrical powerhouse Organization-Tehran, Iran.

- Manufacture and calibration of different transducers & PLC equipment for ICS(Iran Communication Systems Company)-Tehran, Iran

- Design and manufacture of different PLC equipment, transducers, Convertors and switching power supplies for Iranian Oil Organization-Tehran, Iran.

- Producing and testing of High Power Industrial chargers (12V/1- 10A) for Iranian Oil Organization- Tehran, Iran.

- Manufacturing of DC/DC voltage convertors for SAIRAN Company-Tehran, Iran.

- Manufacture and quality control of electrical Appliances for SANAM, Mega Max, Jahan Ava Companies- Tehran, Iran.

- Research and translation project related to Magnetic Flow meters (English to Farsi)-Bandar Abbas, Iran.

- Cause & Effect, Logic Diagram editing project for petroleum site- Bandar Abbas, Iran.

- Test and quality control of different elevator electronic panels for FARMAND ASANBAR Company- Karaj, Iran.

- Participate as a trainer for testing of some installed elevators manufactured by Schindler group- Bafra, Famagusta, Cyprus.

- Design and manufacture of Uninterruptable Power Supply/UPS (2KVA_12V/220VAC _40-60HZ), as a thesis project for bachelor graduation - Karaj, Iran.

- Backup project of Industrial machines PLC Programs such as hydraulic presses for Akhavan Industrial group-Tehran, Iran.

- Design and manufacture of electrical tableau for pipe cutter automatic machine, Akhavan Industrial group-Tehran, Iran.

- Repairing and maintenance projects of textile laser cutter and spreader machine (GERBER-SPREADER CUTTER), Gerad Co.-Tehran, Iran.

- Maintenance projects of automatic sewing and cutting machines for Gerad Co., brands of such as JUKI, DORKUP ADLLER- Tehran,Iran.

- Participate and doing a lot of projects related to AVR and PIC Microcontroller.

- Participate and doing a lot of projects related to online marketing. Page 4 of 5

CAPABILITIE(S) & EXPERIENCE(S) DETAILS

1-Industrial Automation & Controls & Instrumentation

- Ability to programing and hardware configuration on PLCs (Programmable Logic Controllers); SIEMENS

(S7 200,300,400), LOGO COMFORT, OMRON, LG (LS), TOOSHIBA; as well as work reputation of SIMATIC STEP7, HW CONFIG, LADER And FBD programing Languages.

- Ability to process monitoring by HMI (Human Machine Interface) or monitoring systems hardware and software packages like LS HMI and WINCC monitoring software.

- Little knowledge related to design and start-up of industrial networks like ETHERNET, MPI, Profibus.

- Maintenance, Calibration and Control of process by instrumentation devises like flow meters, control valves, level meters, pneumatic solenoid valves,density meters, PH meters, pressure gauges, Pneumatic air regulators and filters, temperature sensors and controllers (like RTD, Thermocouple)

- Ability to understanding, designing related to instrumentation process charts and diagrams, special diagrams like PFD, P&ID; easily to work with AutoCAD P&ID.

- Ability to understanding and making data sheets for instrumentation devises.

- Ability to calibration of SMART Devices or pneumatic, hydraulic, electrical, electronic instrumentation; and also easily ability to work with HART Communicators, FLUKE Multi-Calibrators and Sources, FIELD CARE Software.

2-Electrical & Electronics

- Ability to assemble, maintenance, troubleshooting of electronic boards; and also work reputation of automatic test, troubleshooting machines (APT); as well as enough knowledge about how to use of electronic & electric components, catalogues.

- Ability to designing, analysis and simulation electronic circuits and also draw schematic plans and P.C.B by use of Proteus, Orcad, Protel99SE or Protel DXP.

- Ability to produce, design, calibration, wiring of Industrial Transducers like Watt/VAR (1/ 3ph), VT, CT, RT, TAP Position, FT; and also easily ability to work with HTC Calibrators due to calibration of 1/3-phase devices.

- Ability to produce, design, calibration, wiring of signal convertors like RS232/RS485, Free ASCII, DC/DC, Earth Fault, Load Cell, Analog Switches, Thermo switches; and also easily ability to work with DATA TESTER Software; also reputation on LED advertising Tableaus

- Enough reputation in design and manufacture of LV/MV/HV Electronic boards and tableaus; and also power supplies, inverters, high ampere industrial chargers, UPS (Uninterruptable Power Supply).

- Ability to write program on AVR, PIC Microcontrollers by use of software packages like Codevision, Bascom, AVR studio, Microcode studio, keil; as well as programing by use of PASCALL, C++.

- Little knowledge related to FPGA Microcontrollers and HDL, VHDL.

- Ability to compute or signal processing by MATLAB Software. 3-Industrial Electric and Installations

- Ability to work, NAMEPLATE reading, wiring of 1/3- phase direct or alternative current servo, step, electro motors.

- Enough knowledge and reputation about circuits, industrial power electrical and hardware devices like fuses and circuit breakers, timers, contactors, switches, safety keys.

- Maintenance and operating of CNC machines like crashing, milling, drilling, punching, bent and cutting, welding, laser welding robot, foaming, hydraulic presses; and also ability to work with CATIA software.

- Ability to designing and drawing schematics projects by use of Dialux, Calculux, AutoCAD.

- Maintenance of air compressors, elevators, pneumatic jacks, hydraulic equipment. Page 5 of 5

REFERENCE(S)

1- Dr. Hasan Mollajan, Researcher and professor, Ph.D of Electrical and Electronics. Electrical and Electronics Department, Engineering Faculty, Azad University of Karaj, Iran Phone: +98-912-***-**** Email: adj162@r.postjobfree.com 2- Dr. Reza Effatnejad, Researcher and professor, Ph.D of power electricity. Electrical and Electronics Department, Engineering Faculty, Azad University of Karaj, Iran Phone: +98-912-***-**** Email: adj162@r.postjobfree.com 3- Mr. Ibrahim kucukgencay, Manager of Nacibey Makina company- Istanbul, Turkey Phone: +90-532-******* Email: adj162@r.postjobfree.com

Contact this candidate