HABIBUR REHMAN Saudi Aramco/Qchem Approved
QA/QC Mechanical, Welding & Painting INSPECTOR
Nationality : Indian
Total Experience : 5 Years
Gulf Experience : 3+ Years
Career Summary:
QA/QC Mechanical, Welding and Painting Inspector and Certified Welding and Painting Inspector with five years of experience in various disciplines. Saudi Aramco Approved QA/QC Mechanical, Welding and Painting Inspector, QCHEM Approved Welding Inspector. Seeking a good opportunity in a company where there is an ample scope to utilize my skills and abilities while being an asset, resourceful, initiative and flexible.
Educational Qualifications:
●Bachelor's Degree in Mechanical Engineering from Anna University, India.
Technical Certifications:
●CSWIP 3.1 Level II - Certified Welding Inspector (CID:705681).
●CSWIP BGAS Level II - Certified Painting Inspector (CID:705681).
●ASNT NDT Level II - Ultrasonic Testing.
●ASNT NDT Level II - Radiographic Testing.
●ASNT NDT Level II - Liquid Penetrant Inspection.
●ASNT NDT Level II - Magnetic Particle Inspection.
●Basic Fire Fighting training.
Scopes Handled:
Fabrication & Inspection on
●Pressure Vessels, Piping, Exchangers, Tanks, and Structures.
●Chilled Water Plant and Fire Water Plant.
●Sewage Water Treatment Plant.
●Irrigation Pump Station.
●Boilers, Tanks and Auxiliary Piping.
●Pipelines & Tanks for Fuel and Water.
Familiarization to Codes and Standards:
●ASME Sec IX – Welding and Brazing Qualifications.
●ASME B31.3 – Process Piping.
●ASME Sec V – Non-Destructive Examination.
●ASME B31.1 – Power Piping.
●API 653 - Repair and Maintenance of Aboveground Tanks.
●API 1104 – Welding Requirements for PIPELINES.
●ASME B31.8 – Gas Transmission and Distribution Piping.
●ASME Sec VIII – Rules for Construction of Pressure Vessels.
●SSPC - Coating Preparation Standards.
Professional Experience:
From July 2020 to September 2020:
Company : Sieco Engineers
Position : QA QC Engineer (TPI)
Project : Shutdown 2020
Client : Mangalore Refinery and Petrochemical Limited
From January 2020 to May 2020:
Company : Bureau Veritas
Position : QA QC Welding Inspector (TPI)
Project : Turnaround 2020 (Butene and Oleffins)
Client : QCHEM – Qatar Chemical Company
From December 2018 to December 2019
Company : A.S Alsayed & Partners Contracting Co.
Position : QA QC Welding/Mechanical/Painting Inspector
Project : Community Support Facilities
Client : Saudi Aramco
From March 2018 to November 2018:
Company : Tecton Arabia Co. Ltd
Position : QA QC Engineer (Welding and Painting)
Project : South Dhahran Water Project
Client : National Water Company
From October 2017 to March 2018
Company : Al-Yamama Company for Trading and Contracting, Dhahran.
Position : QC Welding Inspector
Project : Infrastructure, Utilities and Support Facilities, Dhahran.
Client : Saudi Aramco
From March 2017 – September 2017
Company : Veolia Water Solutions & Technologies, Dammam.
Position : QA QC Engineer
Project : Fabrication of Tanks, Pressure Vessel, Spools, Skids & Frames.
Client : Saudi Aramco, Saudi KAD etc.
From April 2016 – November 2016
Company : CK Engineering Enterprises
Position : QA QC Engineer
Project : Operation and Maintenance of Equipments
Client : Tamilnadu Electricity Generation and Distribution Company
Duties and Responsibilities:
●Understanding and implementation of Quality control procedure ; Quality Manuals, Quality Plans, Method Statements, Inspection and Test Plans accordance with Client Specification and applicable International Codes and Standard.
●Preparation and Qualification of Welding Procedure Specifications (WPS), Procedure Qualification Record (PQR) and Welder Qualification Tests (WQT).
●Ensuring the pipes, plates, fittings etc. received are from the approved vendor.
●Material receiving inspection and proper documentation of MTC, Purchase order etc.
●Fit-up Inspection, weld visual, daily check lists, actual variable sheets, observation report and checking Dimensions orientation as Per Drawing.
●Controlling of consumable storage, inter-pass temperature as per standards and specifications.
●Monitoring in Process welding as per Procedure specifications.
●Review of Piping Isometric, P&ID for verifying Compliance to Company requirements.
●Documenting Multi Inspection traceability report for reference.
●Monitoring and Witnessing NDT, PWHT (Post Weld Heat Treatment), Hardness and PMI (Positive Material Identification) test.
●Carrying out Pneumatic and Hydrostatic tests as per standards.
●Fabrication of Storage Tanks in Pump Station.
●Fabrication of Pressure Vessel, Spools as per IFC drawings and requirements.
●Fabrication of Skids, Frames and Supports.
●Handling and Storage of Pumps, Valves and Pipe spools.
●Coating Inspection and Galvanizing inspection on Tanks, Vessels, Skids and Frames.
●Witnessing Surface Preparation after blasting.
●Monitoring storage of Coating and Adhesive materials.
●Carrying out DFT tests and Holiday tests.
●Maintaining storage records of Welding and Coating materials.
●Handling and Storage of Pumps and Valves.
●Installation of Valves and Pumps.
●Evaluate problems and make initial recommendations for possible corrective actions and preventive actions to effect continual improvement.
●Issuing Non Conformance Report, Site Observation Report, and Corrective Action Request on Quality deviation.
●Performing Quality audit and take appropriate corrective and preventive action for the closing out the NCR'S, SOR’s and CAR’s.
●Conducting tool box meeting, kick off meeting to aware the workers about the work importance and safety.
●Performing Welder Qualification tests and evaluate their visual and NDT results.
●Prepare pre and post punch of piping, hydro test, commissioning works and different QC activities.
●Preparing Daily Progress report and Reporting to the client’s inspector.
●Maintaining the qualified welder log, Radiographic testing log.
●Initiating RT requests and coordinating RT crew from TPI.
●Reviewing RT films, repair and reshoot, if found any unacceptable defects in the welds.
●Trained to operate Lockout and Tag, Confined Space entry and Job safety analysis.
●Reviewing the rates of each welder as per the codes and Specification.
●Preparation of Weld map, Weld Traceability Test package, Test reports and Monthly welder performance report.
●Witnessing vacuum box test, penetration oil test as per requirements.
●Line flushing, disinfection and testing of water.
●Witnessing Service/Hydrostatic test on pipelines.
●Reviewing Test packages and handover all the documents to the Client.
Contact. : +917*********
Email. : adiyao@r.postjobfree.com
Skype ID : imrulhabib94
Date of Birth : 25 June 1995
DECLARATION:
I hereby declare that the statements furnished above are true to my belief.
Date: Habibur Rehman