Power Plant Engineering
Resume:
Naresh Patel
Calgary, Alberta, Canada.
Phone: +1-403-***-****)
E-Mail: (******@*****.**)
Resume
Page 1
Professional Summary: Mechanical Piping Engineer, Project Engineer.
* Mechanical Engineering Specialist with 11 years of Canadian and USA experience. Total 21 years of Post Qualification Expe- rience in refinery, petro-chemical facility, EPC engineering, design & construction, piping design & engineering, stress anal- ysis, materials engineering, construction in green and brown field Oil & Gas Refinery, Upstream/Downstream Oil & Gas, Super Critical, Thermal Power Plant, SAGD Projects.
Experience in Oil & Gas Projects:
SUNCOR Pond 7 Long Term & Integrity Solution Project. Canada (Pipeline Project)
SUNCOR TRO MFTD DDA-2 Phase 1, Canada (Green Field)
CNRL (Canadian Natural Resources Ltd), Froth Treatment Plant 26 Train 2, Canada. (Green Field)
SYNCRUDE Mature Fine Tailings Centrifuging Full Scale Plant (MFT-CFSP), Canada (Green Field)
SHELL, SARNIA, CANADA. Refurbishment for SHELL FCCU – D, 101 Unit, Canada. (Brown Field)
SUNCOR ENERGY, SARNIA, CANADA. ASO Neutralization Unit, Canada. (Brown Field)
IOCL PANIPAT NAPHTHA CRACKER PROJECT, India (Green Field)
IOCL Residue Up gradation and MS/HSD Quality Improvement Project”, India. (Brown Field)
ONGC Vasai East Development Project (High Pressure Compressor Module Off-Shore Platform), India (Green Field) Experience in Power Projects:
2 X 660 MW JAYPEE NIGRIE SUPER THERMAL POWER PROJECT.
235 MW IOCL Combine Cycle Power Plant. IOCL PANIPAT NAPHTHA CRACKER PROJECT, INDIA.
500 MW Poletti Power Project (NYPA), New York, U.S.A
500 MW Fairless Energy Facility (Dominion Energy/Fairless Energy, LLC.), U.S.A
800 MW John S. Rainey Power Project, South Carolina, U.S.A
445 MW KOMASEEMA Combine Cycle Power Plant, India.
90 MW IPCL GANDHAR CCPP, Gujarat, India.
Core Competencies:
- EPC Project Detail Engineering and Design, Site Coordination, FEED and Proposal Engineering.
- Detail Engineering and Construction of Oil & Sand, Oil and Gas Refinery and SAGD Projects.
- Project Control, Project Management, Project report preparation, interaction with Client.
- Piping Engineering & Design, Layout Engineering and Piping Construction Coordinator.
- Good hands on Piping Stress Analysis Calculation, Engineering Deliverables and Material Engineering
- Site Construction Supervisor and Commissioning team member
- Vendor interaction, technical bid finalization and Procurement team member Computer Skills:
* Good Hands on CAESAR-II, PIPSYS, Auto PIPE for Piping Stress Analysis, NozzlePRO, FEPipe.
* Worked on Intergraph PDS, PDMS, Auto Plant, Smart Plant Review for Physical Design Deliverables.
* Worked on Bentley Navigator, NavisWorks JetStream V5 2010 for Plant Model Review, MICROSTATION and AutoCAD.
* Proficient in working with Windows 10 based PC systems and MS Office, Microsoft Word, Excel, Outlook & Power Point. Memberships/Affiliations:
* Applied for P. Eng. membership at APEGA. Cleared NPPE Exam. Case is under APEGA Board Review for final decision.
* Member of SPED (Society of Piping Engineers & Designers) with Level - II Certification. Membership No: (PPD 1421088).
* Registered at PMI (Project Management Institute), application approved and now giving Exam. Education:
Bachelor’s Degree in Mechanical Engineering (BE), From Maharaja Sayajirao University (MSU), Vadodara – India. Diploma in Mechanical Engineering (DME), from Maharaja Sayajirao University (MSU), Vadodara – India.
* Proven experience of critical evaluation for validating “CNRL Froth Treatment Project” piping design and engineering work done by previous contractor. Accurately estimated work done by previous contractor and helped in finalizing work/hour estimation for left out work. Completed detail engineering and site support within budgeted schedule.
* Good experience in preparing piping plans, plot plans, GA drawings, piping layout, 3D piping and equipment modeling, support design & engineering, process P&ID, piping isometrics and composite drawings, pipe support and structural steel drawings. Preparation of material estimation, bill of quantity and piping configuration from P&ID and Plot Plan. Calculation for piping inch dia. for the total project from the MTO.
* Worked on High Pressure Steam Piping, HRSG, Steam Turbine, Boiler Feed Pump, Fuel Oil & Gas, Condensate system, Air cool Condenser, Heat Exchanger, Compressor package, HRSG Blow down systems, fire Protection systems.
* Worked on Service Water Systems, Fire Protection Systems, Compressed Air Systems, Drainage and Dewatering Systems, Domestic Water and Sewage Handling Systems, HVAC, Oil Handling Systems, etc. Naresh Patel
Calgary, Alberta, Canada.
Phone: +1-403-***-****)
E-Mail: (******@*****.**)
Resume
Page 2
* Prepared and issued piping stress analysis and flexibility calculations for various systems such as: pump piping, reciprocating pump/compressor piping, large storage tank piping, PSV piping, large diameter (36” ~ 48”) piping, underground piping, high temperature (creep range) piping, low temperature cryogenic piping, etc.
* Prepared equipment data sheets, vendor drawings and specification review and commenting for project specific requirement.
* Prepared conceptual, basic engineering and detailed engineering packages. Prepared high quality (technically sound, timely, complete and cost effective) design packages with well-understood scopes of work.
* Prepared calculations to address various issues such as Seismic, Wind, snow load, slug flow, mixed phase flow, water hammer, cyclic service, differential settlement, PSV thrust force, etc.
* Experienced in Line Designation Table (LDT), wall thickness calculations, piping and valve materials, valve trims.
* Experienced in RFQ, RFP, TBE, package engineering, vendor document review and packages closeout.
* Well conversed with Oil-Sands Projects Piping and Valve Materials Specifications [Line Classes].
* Experienced in resolution of engineering queries, DDRs, SDRs and site RFIs.
* Experienced in preparation of EWP/CWPs for brown-field piping modification equipment replacement projects.
* Experienced in Line Designation Table (LDT), wall thickness calculations, piping and valve materials, valve trims.
* Experienced in RFQ, RFP, TBE, package engineering, vendor document review and packages closeout.
* As a Material Engineer has good experience in material selection and welding specifications.
* Communicated with ABSA (Alberta Boilers Safety Association) contact person for system/equipment registration.
* Worked independently while managing multiple projects and tasks in a dynamic work environment within the project team and with operations, maintenance and other technical teams.
* Prepared conceptual, basic engineering and detailed engineering packages. Prepared high quality (technically sound, timely, complete and cost effective) design packages with well-understood scopes of work.
* Provided multi-disciplinary engineering services to evaluate, develop and implement engineering solutions to realize business opportunities or address facility operating/performance issues.
* Prepared, reviewed and approved new or changing equipment specifications, request for deviations from corporate standards, Site RFI’s.
* Prepared stress design criteria (DCD), piping specifications, piping data sheets, critical line list, stress analysis calculations on CAESAR II & PIPSYS, piping stress analysis report, piping loads to civil & structural team, pipe rack anchor load design, support design and mark-up on piping drawings, spring hanger/support data sheet & schedule, checking of Isometrics, SPR 3D model review to guide design team, material BOQ checking on Isometrics, technical bid evaluation for piping bulk items, preparation of data sheet for specialty items purchase requisitions, vendor drawing review for all piping items.
* Good knowledge of ASME, API, ASTM standards and ABSA regulations applicable to pressure piping, valves, piping components and materials [ASME B31.1, 31.3, 31.11/31.4,16.34,16.5/16.47/16.48; API: 6D, 594, 598, 600, 602, 603, 608, 609, 615; MSS SP-92; ABSA AR-49, AB-516; CSA B51, Z662; BPV SEC II Part D (Materials)].
* Assist project by providing answer to EPC contractor’s waiver requests and RFI’s related to piping items Plan, monitor and report progress for work undertaken
* Worked as a field engineer to coordinate constructions activities for equipment, piping layout planning and material coordination. Actively involved in interdisciplinary coordination for finalization of various Engineering Interfaces and Site Queries for completion of various construction activities.
* Prepared and issued stress calculation for OSBL outside plant slurry pipe line and ISBL inside plant slurry piping. Valve station design and support engineering. Anchor design for buried and above ground pipe line.
* Experience working in design offices, power plant and at construction sites in Fort McMurray, Canada, USA and India.
* As a lead work directly with project owners to understand and document key engineering problems and assisted client by innovative and strategic suggestion to solve issues on piping engineering, material, CCO spool, specialty items, piping class and piping design.
* Prepared formal reports and presentation to Senior Management and client.
* Audited IFC drawing revision status to ensure erection to the latest drawing revision.
* Proven experience to work on projects from proposal preparation to feed and completion of project from detail engineering to execution and commission of project. Prepared estimates, schedules and tendering documents for project proposals.
* Effectively identified cost effective solutions for piping engineering and design problems. Hand calculations for basic engineering activities and Victaulic coupling design. Expansion joint calculation and data sheet preparation.
* Ensured construction as-built and other related documentation meet data retention requirements. Naresh Patel
Calgary, Alberta, Canada.
Phone: +1-403-***-****)
E-Mail: (******@*****.**)
Resume
Page 3
* Assisted in coordination of the project close-out review and of the final report for senior management.
* Effectively managed as-built and other related data for data retention, document control, and final turnover to Technical Drawings. Experience:
Sep. 2012 –
Continue.
Project Engineer, Senior Piping Engineering specialist – Wood PLC, Calgary, Canada. Project: – * SUNCOR Pond 7 Long Term Project, Tailing Pipeline Project, Canada (Brown Field)
* SUNCOR TRO MFTD DDA-2 Phase 1
* Canadian Natural Resources Ltd (CNRL), Froth Treatment Plant 26 Train 2.
* SYNCRUDE Mature Fine Tailings Centrifuging Full Scale Plant (MFT-CFSP) Stage – 4. Job Profile & Responsibility:
* Responsible for Design, Engineering Deliverables and site support for 48” pipeline project.
* Prepared RFQ, RFP, TBE, package engineering, vendor document review and packages closeout.
* Resolved engineering queries, DDRs, SDRs and site RFIs.
* Completed engineering work requests as assigned. Lead, coordinated and directed technical activities on assigned work to ensure appropriate technical input as well as adherence to established objectives and standards.
* Prepared conceptual, basic engineering and detailed engineering packages. Prepared high quality (technically sound, timely, complete and cost effective etc.) design packages with well-understood scopes of work.
* Select expansion joints when necessary and approved, determine movements, prepare requisitions and datasheets.
* Ensured that project deliverables including all technical packages for each stage of the work are complete and are in line with Project specifications and standards.
* Prepared stress design criteria (DCD), piping specifications, critical line list, stress analysis calculations on CAESAR II & PIPSYS, piping stress analysis report, piping loads to civil & structural team, pipe rack anchor load design, support design and mark-up on piping drawings, spring hanger/support data sheet & schedule, checking of Isometrics, SPR 3D model review to guide design team, material BOQ checking on Isometrics, technical bid evaluation for piping bulk items, preparation of data sheet for specialty items purchase requisitions, vendor drawing review for all piping items.
* Prepared and issued stress calculation for OSBL outside plant slurry pipe line and ISBL inside plant slurry piping. Valve station design and support engineering. Anchor design for buried and above ground pipe line.
* To resolved Nozzle load interface with Equipment Vendor to achieve errors free Stress Analysis Deliverables.
* Vendor drawing Review/Comments during various stages of the project.
* Prepared and issued piping stress analysis calculation and reports for critical piping systems on CAESAR and PIPSYS.
* To prepare and issue data sheets for expansion joint, spring hangers, technical specification for various piping inline components, piping material specification, pipe sizing calculation, valve table and bill of quantity.
* Hand calculations for basic engineering activities and Victaulic coupling design. Expansion joint calculation and data sheet preparation. 3D model review for isometric checking and IFC issue, working with piping design group for layout planning and support configuration/design.
Jan. 2010 –
Aug. 2012
Mechanical Project Engineer, “Larsen & Toubro - Sargent & Lundy Ltd.” – Power Division, Baroda Project: – * 2 X 660 MW JAYPEE NIGRIE SUPER THERMAL POWER PROJECT. Job Profile & Responsibility:
* Sr. Piping Engineer (Manager), Responsible for Piping Design and Engineering Deliverables.
* Man Hour Estimation, Distribution of work and to complete it with in Budgeted Schedule.
* Prepared estimates, schedules and tendering documents for project proposals.
* Technical discussion with clients and site visits to understand and solve design related problems. Deputed to project site for queries resolutions and to support the site-related actives.
* Prioritized own work, review and approve work done by other staff members.
* Worked on High Pressure Steam Piping, HRSG, Steam Turbine, Boiler Feed Water Piping, Fuel Oil, Fuel gas, Condensate system, Air cool Condenser, Heat Exchanger, Compressor package, HRSG Blow down systems, fire Protection systems.
* Worked on Service Water Systems, Fire Protection Systems, Compressed Air Systems, Drainage and Dewatering Systems, Domestic Water and Sewage Handling Systems, HVAC, Oil Handling Systems, etc.
* Actively participated in 30% 60% 90% model reviews to stakeholders and multi-discipline teams.
* Worked in Nuclear power plant for feed design and engineering. Developed critical piping stress analysis calculations.
* Developed, support implementation, and monitor compliance with corporate standards for engineering, maintenance and valida- tion processes.
* Effectively managed as-built and other related data for data retention, document control, and final turnover of Technical Drawings.
* Worked directly with project owners to understand and document key engineering problems and assisted client by innovative and strategic suggestion to solve issues on piping engineering. Naresh Patel
Calgary, Alberta, Canada.
Phone: +1-403-***-****)
E-Mail: (******@*****.**)
Resume
Page 4
* Proven experience to work on projects from proposal preparation to feed and completion of project from detail engineering to execution and commission of project.
* Preparation of Piping Material and Inline Component Specification, Pipe Sizing Calculation, Valve table & Bill of Quantity, Vendor drawing Review/Comments during various stages of the project. Oct. 2008 –
Jan. 2010
Sr. Piping Design Engineer, Worley Parsons, Sarnia, CANADA. Project Completed: – * SHELL, SARNIA, CANADA. Detail Engineering of Refurbishment for SHELL FCCU – D - 101 Unit.
* SUNCOR ENERGY, SARNIA, CANADA. Detail Engineering of ASO Neutralization Unit. Job Profile & Responsibility:
* Done weekly site visit for existing up-stream oil & gas facilities and refinery plant piping, tie In point locations and space allocation in existing facility. Collected dimensional information and updated piping layout and stress analysis calculations on Caesar II. Effectively identified cost effective solutions for piping engineering and design problems.
* Site Survey for Existing Refinery Plant Piping, Tie In point locations and Space allocation in existing facility.
* Review and Commenting of Equipment Design Specification and Vendor Drawing.
* Inter Departmental communications for error-free Design.
* Piping design involves Layout Planning, Piping and Equipment Modeling, Support Design, Isometric Drawing generation in Bentley Auto Plant XM and Auto Cad 2008.
* 3D Model Review on Autodesk NavisWorks 2010 JetStream V5.
* Stress analysis activity on CAESAR II.
June 2007 -
Oct. 2008
Piping Stress Engineer, “JACOBS Engineering India Pvt. Ltd.”, Baroda. Project – “Residue Up gradation and MS/HSD Quality Improvement Project” Indian Oil Corporation Limited, Gujarat Refinery, Vadodara, India. Job Profile & Responsibility:
* Stress Engineer, responsible for Stress Analysis activities.
* Design of Critical Piping system from Layout Planning to Stress Analysis with ASME 31.1 and ASME 31.3 Code verification. Prepared and delivered critical line list, Stress Analysis calculations, Piping loads to Civil & Structural, Pipe Rack Anchor Load Design, Support Design and mark-up on Piping drawings, Checking of ISO’s as per stress analysis / support design. Oct. 1996 -
June 2007
Sr. Piping Engineer, “Larsen & Toubro - Sargent & Lundy Ltd.” Power Division, India. Project: – * 500 MW Poletti Power Project (NYPA), New York, U.S.A
* 500 MW Fairless Energy Facility (Dominion Energy/Fairless Energy, LLC.), U.S.A
* 800 MW John S. Rainey Power Project, South Carolina, U.S.A
* 445 MW KOMASEEMA Combine Cycle Power Plant, India.
* 90 MW IPCL GANDHAR CCPP, Gujarat, India.
Job Profile & Responsibility:
* Worked as a Stress Engineer and Lead Piping Design Engineer in Mechanical Plant Design Group.
* Perform work related to physical design of Power Plant Engineering within scheduled date of Completion.
* Job Profile includes Responsibility of Deliverables required for Conceptual Design of the Co-Generation Power Plants.
* Prepared and issued piping plans, plot plans, GA drawings, piping layout, 3D piping and equipment modeling, support design & engineering, process P&ID, piping isometrics and composite drawings, pipe support and structural steel drawings. Preparation of material estimation, bill of quantity and piping configuration from P&ID and Plot Plan. Calculation for piping inch dia. for the total project from the MTO.
* To Co-ordinate between inter/other disciplines regarding the Model Preparation, Updates and interference resolution as per CADPLAN. Support Engineering involves Design and preparation of detail support systems drawings of various Piping.
* Giving Training & Guidance to new Colleges on various CAD Software’s and Power Plant Piping deliverables for optimum use in their day to day assignments and to develop piping isometrics and composites drawings which inline ensures quality and Error free Deliverables.
Reference: Available upon request.
Signature : Naresh Patel.
Contact this candidate