Power Plant Engineering

Resume

Mujibur Rahman

Mechanical Superintendent, oil & gas industries.

adik2z@r.postjobfree.com

Phone -- +880**********

Position for applied: -

Experience in: -

Rotating Equipment --- Pumps, Turbine, Gearboxes,

Compressors, Engine (installation, maintenance,

Repair & calibration of wide range of rotary equipment. Cooling towers, condenser & chiller water pumps, air compressor, firefighting system, water treatment system, vacuum pumps,

Irrigation system.)

Static Equipment --- Pressure vessels, Heat exchanger, Pig launcher/ Receiver, Pipe line, Plumbing pipe, Building Management System (BMS), Firefighting pipe line, oil storage tank & All related Construction, Commissioning & Maintenance job.

Graphics designer

Professional Work Experience:-

Commissioning engineering:- KOC 1 project.(installation of low Sulphur Fuel oil and Gas oil pipe lines MAA to Sabiya and Doha Power stations. Pigging and Cleaning, Hydro testing, Swabbing, Calipering, Drying, Nitrogen purging etc.

Job Duration: - 8/4/2013 to 04/12/2014

Position:- Hydro test Engineer ( permit applicant )

Employer:- Hyundai Engineering & Construction company

Client :- KOC ( Kuwait oil company )

Responsibility :-

# Preparation of Commissioning Materials

# Monitor the progress of testing & Commissioning Activities.

# commissioning meetings on a regular basis with the site team and client team.

# Review the commissioning strategy document which outlines the procedures and processes to be utilized to manage the testing and commissioning.

# Site safety for commissioning team and others including risk assessment, method statements toolbox talks.

# Coordination with the supervision consultant, main contractors.

# Preparation procedures for systematic and sequential testing, pre – commissioning activities, start up and final commissioning activities are achieved in timely manner.

# Assist as necessary client and maintenance team training.

# Preparation of various testing and commissioning reports.

# scheduling, monitoring, witnessing and reporting on testing and commissioning activites to end user and development team.

# Coordinate with design, Quality control and HSE on testing and commissioning progress aspects for assigned area.

# Coordinate with local authorities & third parties related to all necessary testing and commissioning requirements for the project.

# Final inspections on completed projects, initiate contact completion certificates and handover certificates after checking back – punch list clear and submit the project documentation.

Pipeline job: -. Construction pipe line & Cold bending process. Also Expertise in all kind of construction job in the field of oil & gas field.

Job Duration: - 22/10/2010 to 7/4/2013

Position: - Site Supervisor (permit holder)

Employer: - Heavy Engineering Industries & Shipbuilding Company.

Clients :- KOC (Kuwait oil company).

Responsibility:-

@ Perform directions ordered by construction manager.

@ Coordinate and arrange general construction activities in execution.

@ Generally comprehend the current progress status on site.

@ Analyze the performance of subcontractor and that manpower control is exercised in accordance with original plan.

@ Site supervision and implementation and management of safe working condition.

@ Daily progress report and update.

@ Pipe fabrication and installation as per ISO requirement on site and good quality of work and correct installation.

Manufacturing Engineering/Workshop Supervisory:-

Fabrication Type: - Pressure Vessel,(oil separator, gas scrubber, desalter etc.) Tank, Pig Launcher, Structural Fabrication, Tanks Vessels Piping Arrangement Etc.

Blasting & Painting Type: - All Kinds of Metal Fabrication Blasting & Painting As Per Client Requirement.

Workshop Maintenance & Supervisory:

-Mechanical Maintenance plus Machine Shop Supervisory. Carrying out of Periodical Maintenance (monthly, Quarterly, Half yearly and yearly for audit Program). Heavy Engineering Industries & Shipbuilding Company Mina Abdulla Workshop. Kuwait.

Job Duration: - 28/12/1999 to 21 October 2010

Position: - Senior Mechanical Foreman / Time keeper

Employer: - Heavy Engineering Industries & Shipbuilding Company Kuwait.

Client :- KOC/ KNPC ( mina al Ahmadi, shuaiba refinery, knpc refineries maximum pressure vessel and other processing equipment) made by HEISCO

Responsibility :-

# Maintain workshop all employees morning card punch and evening card punch monthly salary hour complete to pay roll and launched arranging over 1000 to 1200 employees.

# All plate rolling machine for pressure vessel fabrication.

# Arranging all equipment for shop fabrication.

# From design engineering collect the fabrication copy and start the fabrication.

# Maintenance all equipment monthly, quarterly, half yearly and yearly.

# Preparation all documentation.

Mechanical Engineering:-

Industrial Type:- Power Plant, Distillation Plant, Oil Refinery, Petrochemical Industries, Oil & Gas Field Any Kinds Of Valve ‘S Pump’s Hydro Coupling Overhauling And Repairing Job.

Onshore Type: - Diesel Engine Overhauling & Repairing Such As Caterpillars, Perkins Tata Etc. All Kinds of Hydraulic Heavy Equipment.

Job Duration: - 04/01/1994 to 27/12/1999

Position: - Senior Mechanic

Employer: - Heavy Engineering Industries & Shipbuilding Company Kuwait

Client :- MEW ( Ministry of electricity and water) and KNPC ( Kuwait national petroleum company).

Responsibility :-

@ Power plant yearly maintenance such as valves, pumps, compressor, turbine, overhauling.

@ Rotary air preheater, blow down pump maintenance.

@ Leading the new worker and training for the maintenance job.

1. Academic Qualifications,

# BSC in Mechanical Engineering- from 1994 to 1998 Total year 4. Pass year 1999 Gpa 3.30. Graduate ID RV40346. Head Way University USA.( Accreditation )

# BSC Pass course- Referred. Education year 1988 to 1989 Total year 2. Registration Number 56801 Roll number 40588.February 1992 Bhola Govt. College under the Dhaka University. Bangladesh.

# Fazil Science- Second division. Education year 1986 to 1987 Total year 2. Registration number 669 Roll Bhola number 860 Pass year 1988 From Bhola Darul Hadith Alia madrasah under the Dhaka Madrasah Education Board Bangladesh.

# Alim Science- Second division. Education year 1984 to 1985 Total year 2. Registration number 840 Roll Bhola number 1384 Pass year 1986 From Bhola Darul Hadith Alia Madrasah under the Dhaka Madrasah Education Board Bangladesh.

# Dakhil 3rd division Education year 1975 to 1982 Total year 8. Roll number 17080 Pass year 1983 From Dakhin Goalbhaur Islamia Dakhil madrasah under the Dhaka Madrasah Education Board Bangladesh.

2. Technical Qualification:-

Mechanical and Electrical Supervisor course Complete from Institute of Technical Affairs (ITA) and Bangladesh Technical Institute Evening timing course.

3. Training:-

@ Emergence Medical Service Course from Department of EMS Kuwait. Year of 2002 and year of 2010.

@ Proximity ( OSHA) Industrial Course from Louisiana University Kuwait. 10 Hours. Year of 2008.

4. Computer Engineering:-

Self-study Software – (a) Microsoft office bundle up to Till date

(b) Auto cad 2d from Kuwait Educational Centre – Branch 2

Study year 01/12/2010 to 31/01/2011 Evening Course.

Hardware (a) Computer Assembling.

(b) Computer Repairing.

(c) Computer upgrading.

(d) Software installation.

5. Permanent Address :- Mujibur Rahman, 4/22 East jamsing, Saver, Dhaka, Bangladesh.

Post code:- BPTAC—1343.

Tele phone -- +880**********. +880**********.

6. Present Address :- Mujibur Rahman.

Bangladesh Tele phone +880**********

Email id – adik2z@r.postjobfree.com.

7. Pass port details :-- Bangladeshi passport EG 0366067

Issue date :- 30 JUL 2020

Expiry date :- 29 JUL 2025

Note :- I have Kuwait driving license( GCC) And Bangladeshi Professional Driving license.

Regards.

Mujiburrahman

Contact this candidate