GEORGE HANA,MBA

Tel (M): 201-***-**** adi65b@r.postjobfree.com

Page 1 of 4

PROFILE

Results-driven and energetic 5G LTE Engineer (Bachelor of Electronics and Communication Engineering) with strong skills in extensive wireless network development, optimization and maintenance across the radio network technologies 5G/LTE/EPC, UMTS, GPRS, CDMA, AND GSM. EXPERIENCE

June 17-Present Kaztronix (MTA) TECHNOLOGY New Jersey,NJ Sr RF Test Engineer

Successfully performed RF network planning,optimization and testing activities by identifying and resolving all coverage and RF design deficiencies.

System integration and test of LTE (PHY & MAC and RRC layers) using channel emulator, spectrum analyzers

, signal generators, SanJole, Wireshark and QXDM.

Verify 4G/5G LTE Call Processing and Testing L1 (PHY), RRC, S1-MME, S1-U and X2 protocols as per Rel 15 3GPP.

Write test plan on network and features.

Testing e-NodeB : before and after software upgrades, check the call processing and performance of UL/DL.

KPI Statistics analysis of LTE.

Undertook e-NodeB parameter modifications as well as key network performance improvement indicators

(KPIs) optimization and troubleshot tasks.

Troubleshooting KPI RF performance ( Accessibility, retainability and Mobility ).

Link budget analysis.

Assisted RF problems, verified and trialed success before launching the project.

LTE RF Designing using ATOLL and IBWAVE (Indoor).

Drive test analysis and optimization.

Oct’15-May 17 Verizon WIRELESS TECHNOLOGY New Jersey,NJ MTS Engineer III

Testing and preparation of the control WORKS system for the latest 4.3x release. This included the updating and running of automated and manual test suites.

Working on E911 and the capacity team to control the traffic all over the East cost.

LTE RF Designing using ATOLL and IBWAVE (Indoor).

Site selection & Review for new locations.

Handling initial IMS registration testing for verification, implementation and confirmation purposes to make sure all new upcoming devices are meeting standard requirement for IMS and UICC activation.

Hands on experience in LTE EPC Network Design, Deployments and End-2-End Lab Integration for various Phases of LTE Labs.

Analyzing Drive Test reports by TEMS and ACTIX programs and providing explanations for poor performance areas.

Working on all type of Automated scripts and Optimization of Simulator Network. GEORGE HANA,MBA

Tel (M): 201-***-**** adi65b@r.postjobfree.com

Page 2 of 4

Nov’13-September15 QUALCOOM WIRELESS TECHNOLOGY New Jersey,NJ Sr. Staff Engineer

Expert in Performance and Productivity Improvement Achieved fast-track promotion to support development of forward looking solutions to address network operator growth and expansion plans covering all network entities.

Verifying Carrier aggregation, eMBMS/CMAS and VOLTE/IMS E2E Call Features, RCS and associated protocols – SIP, SDP, RTP, RTCP, UDP, TCP and MSRP.

Troubleshoot and verified of low Throughput of TDD and FDD in all layers (FAPI) & (MAC) and RRC.

Troubleshooting KPI RF performance ( Accessibility, retainability and Mobility ).

Developing of internal build, integration and sanity test functions, utilities (scripts) to enable delivery of robust and stable releases to System Test group.

Working on all type of Automated scripts and Optimization of Simulator Network.

Work closely with both SW teams and Test teams as needed to help validate functional and performance testing.

Develop tools for extracting data from large data sets for wireless system performance analysis and parameter comparisons.

Used handset and network infrastructure based advanced traces and tools to accurately debug and measure existing and potential network performance issues. (e.g. Debugging mobile phones with USIM, ISIM, CSIM support).

Hands on experience in LTE EPC Network Design, Deployments and End-2-End Lab Integration for various Phases of LTE Labs.

Developed and Designed RFP for 3GPP/3GPP2 (Rel 9,10) LTE core and radio networks deployment and internal build, integration and sanity test functions, utilities (scripts) to enable delivery of robust and stable releases to System Test group.

LTE RF Designing using ATOLL and IBWAVE.

Contributed to development of tools for extracting data from large data sets for wireless system performance analysis and parameter comparisons.

RF: Spectrum/signal analyzer, Spirent SR5500, digital attenuators, RF plant components, SanJole and Agilent.

Tools: Secure CRT, QXDM,Wireshark,Sanjole and UE diagnostic monitors. May’13-Nov’13 NSN

T Mobile (Project) Chicago, IL

Senior LTE/UMTS RF Engineer

Demonstrated analytical excellence and track record of troubleshooting, monitoring and implementation of activities that ensure optimum network performance.

Analyzed KPIs, investigated and improved network quality issues (e.g.: dropped calls, handover failure, setup call failure, CSFB, Low Throughputs etc.)

Analyzing Drive Test reports by TEMS and ACTIX programs and providing explanations for poor performance areas.

Created new RFDS and updated old ones with devices and parameters information for multi UMTS carriers

(1st, 2nd, 3rd, 4th, and 5th carriers) and LTE sites in Chicago and WI regions. Including in—building DAS sites, like Navy Pier and O’Hare Airport.

Analyze Coverage Predictions and Performance Statistics.

Applied End-To-End Quality Of Service for the Radio Network.

Performed Single Site Verification SSV and cluster Optimization for T-Mobile Wireless LTE network..

Provides support to customers in field of expertise.

Indoor/Outdoor RF Designing for T-Mobile IL Market.

Using Map street, Geoplan and Mapinfo .

GEORGE HANA,MBA

Tel (M): 201-***-**** adi65b@r.postjobfree.com

Page 3 of 4

Jan’11-Mar’12 LG-ERICSSON South Korea

SME LTE/UMTS Design Engineer

Successfully performed RF network planning and optimization activities by identifying and resolving all coverage and RF design deficiencies.

Drive test analysis and optimization of LTE/WCDMA

KPI Statistics analysis of LTE/WCDMA

Undertook RNC/NodeB parameter modifications as well as key network performance improvement indicators

(KPIs) optimization and troubleshot tasks.

Assisted RF problems, verified and trialed success before lunching LTE_KT project.

Worked with LTE/UMTS network, standards and protocols.

Created UMTS/LTE RFDS and cell site plumbing diagrams. Jan’10–Jan’11 ERICSSON INC.

Sr. UMTS/GSM Design Engineer

Saudi Arabia

Interfaced with sub-vendors to keep abreast with new products, tools and services, for providing optimized, cost effective solution to Operator.

Provided technical solutions to Customer related to UTRAN features, parameter setting strategy, network evolution roadmap, product evolution, capacity planning, and other areas as needed. Also, technical leadership to HQ and circle engineering teams.

Parameter tuning for the new clusters.

Reported project progress to executive management (internal/Customer), and lead governance meetings with end Customer (Operator).

Jan’07 –Jan’10 ERICSSON INC.

RAN Engineer

Cairo, Egypt

Identified opportunities and developed scope of work and bid rationale for that purpose. Participated in developing functional details of new services and products, process and methodology changes, analytical tools and techniques. Provided feature/benefit descriptions for business development.

Analyzed and recommended equipment and antenna co-location requirements for different technologies.

Performed link budget analysis, design criteria and traffic analysis.

Handled all kind of trouble tickets and CSR (Radio problems and H/W problem).

Radio planned and optimized the 3G network to troubleshoot and improve KPIs.

Advanced troubleshooting for new sites & Expansion & TG-SYNC & EDGE by Command Handling.

Expanded 2/3G Cabinets.

TECHNICAK SKILLS

Actix Analyzer, MapInfo and Google Earth, TEMS Investigation, ATOLL – Outdoor RF Design, CPP product Descriptions, AXE product descriptions, RNC Hardware description, Protocols (ABIS – IU – IUB), L1, L2, L3

& P7 Configuration, Strong IP and network security background, Wireshark – SanJole, EXFO, TM500 – Aeroflex, AutoCAD, QXDM, APEX and Agilent, Ericsson Tools (All Kind of tools related to RF, integration and troubleshooting), NSN Tools. (All Kind of tools related to RF, integration and troubleshooting), Microsoft Office

(Word – Excel – PowerPoint – Access), Linux, Shell and PERL Scripting, C++ and JAVA. GEORGE HANA,MBA

Tel (M): 201-***-**** adi65b@r.postjobfree.com

Page 4 of 4

EDUCATION

2018-Present New Jersey Institute of Technology USA Master of Business administration -MBA

2001-2006 HIGHER TECHNOLOGY INSTITUTE-10TH OF RAMADAN Egypt Bachelor in Electronics and Communications Engineering ADDITIONAL INFORMATION

Language Fluency: English

Certified in IBWAVE DESIGN Level 1 RF ID: 2431116

Certified Cisco ID: CSCO117952232

Solution Architect associate Amazon (AWS).

Contact this candidate