Mark Allan Williams

League City, Texas

adi5n4@r.postjobfree.com

Phone 903-***-****

Objective

I&E Engineer seeking a position where experience and skills will develop a career within your organization.

Professional Skill Overview

Experience in Electrical, PLC & DCS process / production systems, switchgear, synchronous motor and generators, communication systems, HMI’s, process instruments, gas compressors, VFD’s and power distribution with roles involved in refineries, electric power, gas processing, pipeline energy transfer, natural gas and oil well drilling, oil production, air separation and chemical process plants.

Educational Experience

Texas A&M University Dec 2002

College Station, TX

Bachelor of Science in Electrical Engineering

Major Elective’s of Study: Electrophysics, Electro-optics, Microwaves and Computer Architecture with focus in semi-conductor microprocessor design and fabrication.

Code of Compliance

IEEE, NFPA70E, NEC, ANSI/ISA, CFR, API, ABS MODU, UL and ASME B31 B16

Vocational Software Experience

Allen Bradley Studio 5000, RS Logix 5000, Factory Talk View ME, Siemens Simatic TIA, Omron CX-Programmer, Fortran, AutoCAD, AutoCAD Electrical, Matlab, Maple, PSpice,, Yaskawa Drive Wizard Industrial, Toshiba Unicon, Woodward ToolKit, GE Fanuc Proficy, Modicon PLC, Texas Instruments 505 TISOFT PLC (now Siemens), Automation DirectSOFT, WAGO and continuous learning in C++ and Arduino.

Professional Experience

Wood Group January 2019 to January 2020

I&E Contract Specialist

DCS, PLC, HMI and VFD programming, mitigation and maintenance of petroleum systems

Radio & Fiber optic Communications

Industrial I&E Production Plant Maintenance

High Voltage Substation Operation and Maintenance

Troubleshoot Low, Medium and High-voltage systems.

Overhead utility power distribution line troubleshooting

Synchronous & Induction Motor Troubleshooting & Repair

Plant SIS and Automated SDV & BDV Systems

Liquid / Gas Hydrocarbon / CO2 Processing and Storage Systems

Gas and CO2 Compressor and Injection Control Systems

Hydraulic and Pneumatic controls troubleshooting and repair.

Instrumentation, Flowmeters and Valve Controls of Wellhead, Piping, Gas Separation, Petroleum Processing, Tank Battery Storage, Flare and Vent Stack Systems.

General Instrument and Electrical Troubleshooting & Repair

Toshiba VFD S3 & S7 systems / Baker Hughes VFD Drive Systems

Baker Hughes CENtrilift ESP VFD & Switch Lift Systems

MCC Switchgear Troubleshooting & Repair

Lighting and Power Repair, Installation and Maintenance

Integrated Power Services, Houston TX July 2015 - July 31, 2017

Senior Field Service / Electrical Engineer

Provided hands on Turnaround, Operational and Commissioning Service to ASU, Chemical, Refinery and other manufacturing processes of plants.

Constructed Reliability and Field Reports from Testing and Troubleshooting findings of motors, VFD’s, instruments cables, controls and electrical power.

Repaired and Refurbished Industrial Equipment..

Large scale motors and generators, synchronous control wheels, DC power rectification, IGBT soft start, VFD’s and control circuitry within plants.

PdMA, semiconductor & generic electrical testing, trending, forecasting and troubleshooting largescale SCR, diode, FDR, control modules, rotors and stators.

Safety compliance of live operating systems including 13.8kvac, 6.8kvac, 4160vac, 2300vac, 800vdc, 600vac, 480vac, 240vac, 208vac 120vac.

Experience in rotating equipment root cause failure analysis.

Field Reports, Site Acceptance Test, Job Safety Analysis, Lockout/Tagout, Fault Tree Analysis, Root Cause Failure Analysis, Failure Reporting Analysis and Corrective Action System, Preliminary Hazards Analysis, Loss Prevention, Turnaround Service, Shutdown Service, Code Compliance.

Omron Oilfield & Marine, Houston TX 2012-2015

Automation Oilfield Technician / Electrical Engineer

Provided hands on troubleshooting, advice and repair of automation, instrument and electrical equipment on large scale drilling rigs.

Conducted well loss prevention during drilling operations that encroached repair during operations.

Operational repair, Retrofit Installations, Commissioning electrical and instrument advise, supervision and approval of electrician work.

Electrical, instrument and automation with sole responsibility of maintaining the reliability and wellness of automated oil rig drilling systems.

DCS Systems, Generator power & controls, DC power rectification, VFD’s, fiber optics, remote I/O’s, HMI Screens, safety interlock systems, ESD Circuitry, data loggers, networks, MCC’s, autonomous driller hand controls and electric motors.

Other components include hall sensors, transformers, power supplies, hydraulic controls, temperature sensors, pressure sensors, encoders, proximity sensors, copper to fiber transmitters and receivers, remote cellular, signal isolators and converters, Modbus, Profibus, CAN bus and Ethernet.

Hands on electrical safety of live operating systems including 800vdc, 600vac, 480vac, 240vac, 208vac 120vac, 24vdc, 12vdc, 5vdc and fiber optics.

Field Reports, Site Acceptance Test, Job Safety Analysis, Lockout/Tagout, Fault Tree Analysis, Root Cause Failure Analysis, Failure Reporting Analysis and Corrective Action System, Preliminary Hazards Analysis, Loss Elimination, Process Improvement, Commissioning, Shutdown and Operations Service.

TeqPro (Sub contractor for Wilbros Engineers ConocoPhillips-Eagle Ford-Gas Stabilization Facility), Houston TX 2011-2012

Instrument, Automation and Electrical Engineer

Designed PLC system & Procured Instruments and pseudocode according to process.

Electrical engineering design, calculations, development and drawing approval of plant from scratch though team efforts.

Instrument application, automation design, power cable selection, addressing reliability concerns and procurement.

Vendor and product review meetings.

Process intervention and design meeting client specifications and code regulations.

Aerotek (Subcontractor at Westlake Chemical), Longview TX 2011

Safety and Reliability Electrical Engineer

Provided hands on reliability investigations and troubleshooting of equipment involved in polyethelene plastics chemical processes from manufacturing to shipment.

Addressed engineering and operator concerns through investigation, scope development and solutions for instrumentation, signal process controls, safety shutdown interlocks within a plant.

Projects involved DCS systems, nuclear level detectors, radar level detectors, temperature transmitters, temperature switches, valve actuators, pressure transducers, pressure transmitters, pressure switches, linear differential transformers, isolation valves, shutdown valves, indicators, liquid level controllers, electric motors, lube systems, relays, power supplies, power and signal distribution.

Systems involved were chemical process, gas compression units, liquid and pelletized storage units, compressor cooling units, refrigeration units, plastic melt systems and pelletizing units.

Field Reports, Improvement Studies, Job Safety Analysis, Lockout/Tagout, Fault Tree Analysis, Root Cause Failure Analysis, Failure Reporting Analysis and Corrective Action System, Preliminary Hazards Analysis, Process Improvement, Turnaround and Operations Service, Code Compliance.

Blue Bell Creameries, Brenham TX 2008 to 2009

Electrical Engineer

Provided hands on troubleshooting, repair and reliability improvements to automation, instruments electrical equipment and processes.

Provided electrical design and small scale engineering project management, PLC automation for ice cream and snack line processes.

Multiple PLC software oriented with manufactures such as Siemens, GE, Omron and Allen Bradley.

Procured and programmed VFD controllers, vast array of proximity sensors, relays, overloads, circuit breakers, A/C Motors, transducers, solenoid controls, flow control valves, pressure/temperature sensors, flow meters and controllers according to application.

Engineering support & repairs to equipment such as medium voltage switch gear, closed loop control of signals and systems, staged compressor units, heat exchangers, cooling systems, electronic product volume transfer for dairy systems.

Field Reports, Site Acceptance Test, Job Safety Analysis, Lockout/Tagout, Fault Tree Analysis, Root Cause Failure Analysis, Failure Reporting Analysis and Corrective Action System, Preliminary Hazards Analysis, Loss Elimination, Process Improvement, Shutdown Service

Weatherford P&SS, Houston TX 2007 to 2008

Lead Offshore Field Engineer

Provided hands on operational support and supervision of pipeline services.

Field engineering support for offshore production and subsea pipeline systems in the Gulf of Mexico.

Temporary production operations and test units involved nitrogen generation units, high pressure triplex liquid compressors, high stage gas compression units, high volume centripetal liquid pumps, hydrostatic pressure testing, helium leak detection, flow meters, intercoolers, medium pressure hammer unions, 40 to 700HP diesel engines, hydraulic drive transfer units, vacuum drying units, generators, air media dryers, valves and fittings from inch to 60 inches, instrument gauges, check valves, bleed offs, transport containers, waste management, securing of tools and equipment for high seas.

ROV subsea pipeline tool fabrication, subsea instrument logging, pipeline flooding, flushing, hydrostatic pressure testing, chemical cocktails for Denizen 1, 2 and 3.

Full project service responsibility from concept to close for Chevron, Anadarko, BP, Williams Energy, BHP Billiton, Entergy, Pegasus International, Enterprise Petroleum and Helix.

Rigging and crane operation responsibilities.

Field Reports, Site Acceptance Test, Job Safety Analysis, Lockout/Tagout, Fault Tree Analysis, Root Cause Failure Analysis, Failure Reporting Analysis and Corrective Action System, Preliminary Hazards Analysis, Loss Elimination, Project Expense Reports.

Temporary Contract Engineering Assignments

2002 to 2007

American Bureau of Shipping, Houston TX

Electrical Engineer – Contractor

Reviewed and advised electrical engineering designs so they comply with Mobile Offshore Drilling Unit codes within its ship’s classification developed by ABS society.

Maintained electrical design compliance of drilling and vessel machinery from dead to fully operating ship conditions considering ventilation, zone classification and dynamic positioning system.

Hazardous Area Classification, Process & Pseudocode, Electrical Engineering to meet MODU code.

Evaluation of Bill of Material Compliance to Regulations.

SonSub Eni Seipem, Houston, Texas

ROV Technician

Petroleum offshore dive operations, repair, tool retrofit and reliability of electronic navigation, computer integration systems, fiber optic communication, hydraulic propulsion, hydraulic specialties, video and sonar for remote operated submarine vehicles.

NS Controls, Houston, TX

Project Manager & Electrical Design Engineer - Contractor

Provided design and project management services including cost estimating, planning, regulation compliance, procurement, construction and delivery of control building skids.

Designed control systems and switchgear with PLC’s (GE and Allen-Bradley), MCC, transformers (single and 3-phase), protective relays, RTUs, cabling, conduits and cable trays with specifications that meet the requirements for transmitters, AC-Drives and MOV’s for pipelines.

Conveyed Low and Medium Voltage design to drafters that meet the requirements and deadlines of projects.

Project management and engineering of control building layouts, switchgear, cabling, conduits and cable trays.

Monitored Code of Compliance in Bill of Materials.

Universal Ensco, Inc., Houston, Texas

Pipeline Engineer and Project Manager - Contractor

Project management services that involve pipeline relocation, cost estimating, planning, development, procurement and construction packages for ATMOS Energy.

Applied engineering methods with Code of Federal Regulations.

Performed analytical reviews and arithmetic checks such as hoop stress and p-burst.

Some pressurized vessel calculations and design for knock out drums or condensate separation units.

Developed Construction Packages and Procedures.

H Rosen USA, Houston Texas

Field Inspection Engineer and Pipeline Data Analyst - Contractor

Hands on troubleshooting and tooling countermeasure modifications throughout pipeline inspections.

Geometric, GPS and corrosion smart pig tools that require careful initialize, launch and extraction from pipelines.

Inspection Team Leader responsible for on-site tool programming, servicing and troubleshooting of electronics and mechanics.

Rigging and crane operation responsibility.

Field Reports, Inspection Test, Job Safety Analysis, Lockout/Tagout, Data Anomaly Evaluations.

Military Experience

Aviation Electronics Technician 1994

United States Navy (HSL-47), San Diego, CA

Troubleshoot and maintain avionic systems involving electronic navigation, communication, optics, infrared, sonar, torpedoes, missiles and magnetic anomaly locating devices for LAMPS MK-III H-60F military helicopters used in anti-submarine warfare.

Contact this candidate