ENRICO S. INCOMIO

Contact Number +** * ********, +63-926*******

Email Address adi4wc@r.postjobfree.com adi4wc@r.postjobfree.com

Philippine Address 33, Mercedes Benz St., Noel Homes, Bgy. San Francisco, Binan, Laguna 4024, Philippines

KEY QUALIFICATIONS

Has more than thirty (30) years of professional work experience in the different field of Design Works of Substations, Transmission and Distributions, Oil and Gas, Multi-storey Buildings and Project Management of Multi-storey buildings and Road/ Bridge Construction.

Registered Civil Engineer; experienced in surveying, planning, scheduling, structural design, cost estimating, contracts administration and project/construction management.

EDUCATION AND PROFESSIONAL STATUS

B.Sc. Civil Engineering, Mapua Institute of Technology, 1985

Registered Civil Engineer (Philippine Regulation Commission, Philippines)

Member of Philippine Institute of Civil Engineers (PICE) – Laguna Chapter

Registered Civil Engineer in Professional Eng. Committee (PEC), Qatar Grade B

COMPUTER KNOWLEDGE & SKILLS

Proficient in Microsoft Windows Applications

Knowledgeable in Engineering Design Software/Applications (SACS, AutoCAD, STAAD, ETABS, SAFE, PLS-POLE and PLS-TOWER)

Knowledgeable in Survey Works using Total Station (Leica and Trimble)

Completed training in the use of ETABS/ SAFE, STAADPro Design Software, SACS.

Familiar with International standards e. g. BS Codes, Euro Codes, ASCE, ACI318M-14, AISC, API

EXPERIENCE RECORD

Feb 2018- May 2020 JGC Phil, Muntinlupa, Metro Manila

Lead Engineer

Projects:

PKI (Philippine Kao inc.)

Responsible in undertaking the design and drafting works, project coordination, preparing and implementing the quality plan and control of the assigned project.

Reviews fabrication drawings submitted by vendors.

Project Harmony (Kuraray, Thailand)

Checks structural layout, design calculation and construction drawings of Piperacks, equipment structures prepared by Engineers.

Monitors the progress of works and ensure that deadlines must be complied.

Coordinates with JGC Yokohama regarding design requirements and other issues.

March 2016-Nov. 30 2017 MOTT MACDONALD LIMITED, Energy Unit Middle East

Structural/ Civil Design Engineer

Projects:

Jebel Ali Refinery Expansion Project

-MML was contracted as Permitting Consultant (by Technip) and we are responsible in the review and check of structural design calculation and structural drawings of Pipe racks foundation/ steel structures, equipment structural support, pump foundation etc. submitted by EPC Contractor (Technip) prior to submission to Local Authority (Trakhees).

-Coordinates with the Clients regarding technical and design issues

-Cooordinates with Local Authority (Trakhees) regarding their queries on submitted design and drawings prior to final approval

132/ 11 kV Substations in Furjan, Warsan Village, Jeblhils and Manazil

Client – Dubai Electricity and Water Authority (DEWA) Substations

-Reviews and checks Architectural/ Civil plans/ detail drawings of 132/11 kV Substation buildings submitted by Contractor;

-Reviews and checks structural design calculations in ETABS and STAAD of substation building, and foundations;

-Conducts site inspection regarding design issues;

February 2014 – February 2016 MOTT MACDONALD LIMITED, Middle East

Structural/ Civil Design Engineer

Doha, Qatar

Project: KAHRAMAA’s Qatar Power Transmission System Expansion Phase XI

-Coordinates with the Clients regarding technical and design issues of the projects assigned

-Reviews and checks Civil and Structural plans/ detail drawings of 66/ 11 kV Substation buildings;

-Prepares comments and recommendations to correct design and detail drawings submitted by Contractor;

-Performs and checks structural design calculations of substation building, and foundations;

-Performs check drainage calculations, road design, boundary walls and other civil works required in the substations;

-Builds and maintains good relationship with the Client by attending Technical/ Coordination meeting

August 2013 – Feb 2014 JGC Philippines Inc.

Senior Engineer, Civil Dept.

Project: Train 9, LNG Petronas

-Responsible in monitoring the Design Progress of Items (Pipe Bridges, Pipe Racks) being handled.

-Performs and Checks structural calculations and drawings of equipment structures, piperacks, and etc.prepared by Structural Engineers. Ensures that technical compliance with Client’s Specifications, applicable standards and relevant codes.

-Coordinates with other departments i. e. Piping, Electrical Department to consider in the Layout and in the Design.

-Coordinates with JGC Yokohama Civil Coordinator regarding updates of design works.

-Participates in the review of Client’s Technical Specifications and Standard Drawings and provide feedback for any standard updating.

Jan 2012 – May 2013 MOTT MACDONALD LIMITED, Middle East

Structural Design Engineer

Doha, Qatar

Project: KAHRAMAA’s Qatar Power Transmission System Expansion Phases-X and XI

-Reviews and checks Civil and Structural plans/ detail drawings of 132/11kV Substation buildings;

-Prepares comments and recommendations to correct design and detail drawings submitted by Contractor;

-Reviews and checks structural design calculations of substation building, and foundations;

-Reviews and recommends materials submittals and method statements for project use.

March 2010 – Dec. 2011 Structural Design Engineer, TDM

Dubai, UAE

Federal Electricity and Water Authority (FEWA)

Proj. E-6 & E-7 – 33/11kV Substations

-Reviews and checks Civil and Structural design and drawings of 66/11 kV Substation buildings

Proj. E-8 & E-9 – Cabling Works (132 & 33 kV)

-Reviews and prepares comment regarding design calculation of joint bays, concrete trench, cable support, etc for underground cabling works

Mar 2009 – Mar 2010 Structural Design Engineer, TDM

Doha, Qatar

Projects: Qatar Power Transmission System Expansion Phase VIII – Substations and Power Cables - Kahramaa

66/11kV Substations at EDC

-Reviews and checks Civil and Structural plans/ detail drawings of 66/11 kV Substation buildings;

-Prepares comments and recommendations to correct design and detail drawings submitted by Contractor;

-Performs and checks structural design calculations in STAAD or ETABS of substation building, and foundations;

-Reviews and recommends materials submittals and method statements for project use.

April 2008 – Mar 2009 Structural Design Engineer, TDM

Dubai, UAE

Projects:

Dubai – Dubai Electricity and Water Authority (DEWA) Substations

Abu Dhabi – Transco Transmission Projects

-Reviews and checks Architectural/ Civil plans/ detail drawings of 132/22 kV Substation buildings submitted by Contractor;

-Reviews and checks structural design calculations in ETABS and STAAD of substation building, and foundations;

-Reviews and checks structural design calculations of transmission towers/ stub angles and foundations;

-Conducts site inspection regarding design issues;

Mar 2003 – Mar 2008 NATIONAL TRANSMISSION CORPORATION (TRANSCO)

Principal Engineer – Planning, Design & Cost Estimating

-Performs and checks structural design calculation of substation facilities, supporting structures of equipment be installed;

-Checks the structural capacity of steel pole, cross arm and line hardware using PLSPole Software;

-Prepares plans and detail drawings to be the basis of estimate as well as construction implementation;

-Conducts detailed quantity and cost estimating which comprise labor costs, material costs, equipment/machinery costs, overhead costs, taxes, and other contingencies,

2000 – 2003 NATIONAL POWER CORPORATION, Manila, Philippines

Senior Engineer (Design) – Operations Project Office

Responsible in the preparation of structural design, detailed drawings and cost estimate of proposed substation/ transmission projects.

Oct. 1999 – Oct. 2000 Cavite Ideal Intl. Const., Cavite, City - Philippines

Quantity Engineer

Project: Malicboy-Pitogo-Macalelon Road, Contract Package 6L-4 ADB Assisted, Sixth Road Improvement Project

Responsible in the conduct of survey, quantity estimate of road projects. Responsible in the Preparation of Monthly Reports and Progress Billings

April 1996 – Dec.1998 National Power Corporation

(Operations Project Office, Design & Construction)

Engineer-A (Civil)

Monitored/supervised construction activities/ methodology of the following projects in accordance with the plans, specifications and government standards:

-Construction of Additional Drainage at Lumban Kalayaan Relocated Road

-Concreting of Access road leading to KPSPP Intake (Dam)

-Slope protection (Gabions) for Caliraya Hydroelectric Power Plant tail race

Prepared design, study, cost estimate, drawings of the following proposed project:

-Construction of Piping System for Steam Drains & Effluents at Mak-Ban plants A,B,& C

-Pre-construction phase (Detailed Engineering) of proposed Access Roads Leading to NPC Microwave Towers

Dec. 1989 – Oct. 1995 Saudi Telecom

(Ministry of Post, Telegraph & Telephone KSA)

Civil Engineer (Design & Construction)

Structural design and supervision / regular inspection of projects and facilities of Telephone buildings and other facilities for following projects:

1)Administration Buildings and Site Development at South Region

2)Najran Subscription Office Building

3)SRS Towers and Building Facilities

Dec. 1985 – Dec.1989 Techniks Group Corporation

(Consulting Firm) – Philippines

Quantity Surveyor / Civil and Structural Inspector

Pamplona- Sta. Catalina Road Project Negros Oriental Province, Philippines

Responsible in the conduct of survey, quantity estimate of road projects. Responsible in the preparation of monthly reports and progress billings

San Francisco- San Andres Road Quezon Province

Supervision / regular inspection of bridges, drainage culverts and other structures of road networks.

Technical Trainings/ Seminars:

1.Cubicost TAS (Quantity Surveying Software on Oct 24 & 25 2020 by Glodon Philippines.

2.Basic Structural Analysis and Design of RC Building using ETABS& SAFE on 13th & 20th October 2017 by PICE UAE

3.Design of Offshore Structures using Bentley’s Structural Analysis Computer Software(SACS) held on Nov 13, 20, Dec 4 & 11, 2015 by ASEP Qatar in cooperation with Bentley

4.Introduction to Offshore Structures – Design and Construction conducted by ASEP (Qatar Regional Committee) May 29, 2015

5.Earthquake Engineering Summit conducted by ASEP (Qatar Regional Committee) February 13 & 20, 2015

6.Site Safety Awareness through Learning Point, Mott MacDonald, March 2, 2014

7.Project Management Fundamentals through Learning Point, Mott MacDonald, October 21, 2012

8.Structural Designing using ETABS and SAFE conducted by Cambridge Institute, Abu Dhabi, U.A.E in April 2008

9.Special Topics in Reinforced Design conducted by Association of Structural Engineers of the Philippines (ASEP), September 13,2006

10.PLS Tower & PLS Steel Pole Training conducted by P & C Systems Inc. December 17, 18 & 20, 2004

11.MS Project 2000 conducted by Transco, December 22-23, 2003

12.STAAD-PRO, Computer Aided Structural Analysis & Design, June 7, 2003 to June 28,2003 for 30 training hours

13.AUTOCADD Rel 13 and Printing, May 1998, Conducted by CompuAdd

Contact this candidate