OBJECTIVE:

SUMMARY OF EXPERIENCE:

JOB PROFILE:

CURRICULUM VITAE

RAVI.G Mobile: +91-812*******

MANAGER- ELECTRICAL DESIGN Email: adi29s@r.postjobfree.com To pursue a responsible and challenging career in your esteemed organization for carrier advancement that will utilize my knowledge and technical skills there by allowing me to serve the organization to the best. 15+ years of experience in Design activities in Control Panel with AUTOCAD 2020 CLASIC & ELECTRICAL SOFTWARE & SLD, BOM, GA, CIRCUIT, CUSTOMER INTERACTION, DRAWINGS APPROVAL, TEAM MANAGEMENT), Insulator, UPS, Elevator manufacturing industry. Major experience in Load control India Pvt. Ltd., (13YEARS OF EXPERIENCE) & In Control InfoTech India Pvt Ltd.:-

Designation : Manager- ELECTRICAL DESIGN

Company : Load controls India Pvt. Ltd.

Industry : Electrical control panel

Duration : From AUG 2006 to OCT 2019.

STEP BY STEP CAREER GROWTH IN LOAD CONTROLS INDIA PRIVATE LIMITED: -

Trainee Electrical Design Engineer (2006)

Junior Electrical Design Engineer (2007)

Design Engineer- Electrical (2008)

Senior Design Engineer- Electrical (2012)

Assistant Manager- Electrical design (2016)

Manager- Electrical design (2017)

ROLES & RESPONSIBILITY:

• Planning with Order Acquisition, Contracts Management & Business Support Team for On Time Project Execution as per Customer Requirement.

• Coordinate With customer any Project detail requirement and for approval follow ups along with site visits.

• Scrutinization of AUTOCAD/ / based Protection Schematic Drawings with respect to the utility/End customer Technical Specification Particulars after understanding their system Operation & Working Philosophy along with the station protection single line diagram for both conventional Systems.

• Coordinating with customer to match the existing system requirement

• Reporting and Analyzing of project Status Periodically for management review.

• Proper utilization of the available manpower for achieving the proposed target.

• Addressing and analyzing & providing solution to various problems related to protection design engineering & manufacturing without compromising customer requirement.

• Job allocation of the Design Engineers.

• Handling individual activities & Attending Design review meeting with project engineers.

• Attending weekly flow meeting.

• Coordinating with Purchase for make deviation, PPC, Store for project related queries.

• Coordinating with Marketing for technical value addition

• Coordinating with customer for technical clarification

• Solving individual engineer technical queries & Supporting for ON TIME DELIVERY OF DRAWINGS.

• Documentation on individual engineer report, all types of check list.

• Cross checking with Single line diagram, General arrangement drawing, bill of material with respect to Rating, Quantity, Voltage etc.,

• Cross checking of Control circuit with respect to technical requirement.

• Email / telecom communication with customer for drawings approval or technical clarification.

• Making minutes of meeting with customer for record purpose.

• Consultants visit for drawings approval & technical discussion.

• Coordinating with R&D team for technical clarification & supporting for other team clarification.

• Solving Production technical clarification.

• Monitoring team members.

• Conducting monthly training session for internal team development with respect to new learning & latest updation on work process.

• Coordinating with QC team for Technical problems & As-Made drawings.

• Perform or Schedule Internal Audits.

• Collect data for measurement to Quality Objectives.

• Prepare and maintain all ISO required documentation.

• Monitoring of Quality in design drawings.

• Report to HOD of individual engineer with respect skill matrix.

• Conducting induction program for New Trainee engineers.

• Supporting & Guiding how to prepare SLD, GA, BOM, SCHEMATIC to New trainee engineers. Supporting & Monitoring below works in my Team & Works during design engineer post: -

• Collecting project requirement details from customers and analysis of technical feasibility of customer requirements and finalizing the technical & commercial aspects of the project with marketing & Purchase team.

• Designing of General arrangement layout, Single line diagrams & Bill of Material as per the client’s or consultant’s specifications.

• Submitting the General arrangement, single line diagrams, Bill of Materials to Clients or consultants for final approval.

• Updating the drawings as per the comments made by the client or consultant.

• Releasing the finalized drawings/documents and coordinate with production department for job execution.

• Preparation of As-built drawings of General arrangement, Single line & Control Schematics after the completion of final inspection of panels by our clients and Consultants.

• Submitting As-built drawings to our clients and consultants, along with the Panel delivered to the sites.

• Components selection: Selection of Electrical switchgears (VCB, MPCB, MCB, MCCB, RELAYS, CABLES, Battery & other Control elements).

• Control Panel: very good knowledge on schematics of various panel viz... DG Panel, Main LT Panel, Capacitor Panel, Fire fighting Panel, Lift & Elevator Panel, VFD, DOL Starter & Star-Delta Starter Panel

& PLC Panel

• PLC Equipment Selection: PLC equipment selection of various makes (SIEMENS, SCHNEIDER, ALLEN BRADELY).

• Load Calculations.

• Preparation of key and detailed SLD.

• Preparation of DBR (Design Brief Report).

• Cable sizing and selection.

• Voltage Drop calculation.

• Panel Sizing, Breaker sizing, Preparation of DB Schedule.

• ACCP Panel (for Power Factor Improvement) sizing.

• Preparation of single line diagram for LT Power Distribution.

• HT Switchgear Protection and Selection.

• LT Switchgear Protection and Selection.

• Calculation of Short Circuit current.

• Designing of SLD & Control scheme for LV & MV panels Based on IEC 61439 & 62271

• Preparation of MSLD & Flow drawings with MIMIC

• Preparation of Bill of Material & Selection of switchgear Type of LT PANELS.

• LT Power Control Center.

• LT Main Metering Panel.

• LT Motor Control Center Panel

• LT Main LT Panel.

• Sub Distribution Panel

• Solar Panels

• Auto Main Failure Panel (AMF).

• LT Outdoor LT Kiosk Panel

• LT Lift Panel.

• Auto Change Over Panel (Motorized MCCB Change Over, Contactor Change)

• LT DG Synchronizing Panel.

• LT Starter Panel (DOL / S/D / VFD / SOFT STATER / DUAL SPEED)

• Automatic Power Factor Control Panel (Capacitor Panel) Etc., Project Handled: -

1 ABB - JSW, TATAMOTORS, ABB Nelamangala, SJCL, BOKARO STEEL, etc. 2 GE – CPP Lalkua, BOC Bellary, Vedantha Aluminum, Naval Acadamy Cochin, TCS Chennai, VSP, Bokaro steel, etc.

3 GMMCO – IBM Pune, etc

4 Draw out panel –NINL, VSP, Akzonobel, etc

5 Infrastructure- Bagmane tech park-2, Tanglin global tower-1,2, RMZ group, BMTC Kengeri, etc. 6 Building sector- Sobha Developers, Salar puria/satva group, Mantri synergy Chennai, Godrej properties, etc.

7 Industrial- Denso kirlosker, TQM-busduct, AO Smith, Akzo Nobel, Autoliv etc. 8 DG Sync- NCC, Mantri Synergy, Denso Kirlosker, etc. 9 MV- SCHNEIDER, ITC, BHARATHI AIRTEL etc.

10 Other projects: - Sri Jayjothi Cements,Kurnool,Ap & Visakhapatnam Steel Plant & 2x45mw capative power plant

ETA engineering pvt. Ltd.,

BOSCH phase-2 hvac (naganathapur),

Tcs techno park adibatla, hyderabad.,

BARC & BIAL

Square textile mill.,

MMD heavy machinery india pvt. Ltd.,

hindusthan petroleum corporation limited devangonthi, Block l3 (sez) @MANYATA,

SOBHA belagere precast

GADAG water supply

Divya sree tech park (ht panel)- b5 block(sez) 1 vcb panel Embassy one at bangalore

M/s. RMZ ECOWORLD c 3- campus

BIEC

Adarsh Palm Retreat

HONEYWELL

RMZ ecoworld

MANTRI Primus

MANYATA G3

OVERALL COMPANY WORKING EXPERIENCE: -

1) Current working as a MANAGER- Electrical design, Control InfoTech Pvt. Ltd Department: Electrical Design

Industry: Manufacturing

Duration: OCT 2019 – Till date

2) Worked as a MANAGER- Electrical design 13years, Load controls India Pvt. Ltd., Department: Electrical Design

Industry: Manufacturing

Duration: Aug 2006 – Oct 2019

3) Previous working as a CAD Engineer 6months OTIS ELEVATOR, JIGANI (As a 6Month contract) Department: Design

Industry: Manufacturing

Duration: Dec 2005 – June 2006

4) Previous working as a CAD Engineer 1year BHEL-EPD Division (As a Apprentice trainee) Department: Design

Industry: Manufacturing

Duration: Dec. 2004 – Dec 2005

5) Previous working as a Material Specialist 6Months APC -JIGANI (As a 6Month contract) Department: Store

Industry: Manufacturing

Duration: Aug. 2004 – Dec 2004

PERSONAL DETAILS:

PROFESSIONAL QUALIFICATION:

Bachelor of Degree in Electrical & Electronics (B.TECH) from KARNATAKA STATE OPEN UNIVERSITY (KSOU) Karnataka (62%)

Diploma in Electrical & Electronics Engineering from Reddy Jana Sanga,Kormangala,Bangalore(57%) SKILL SET

Ms-Office, Open-Office.

Operating Systems WIN-XP, WIN-7 & 8.

AutoCAD Versions-2004-2020 – AUTOCAD ELECTRICAL & CLASSIC Father’s Name : GANGARAJU S

Date of birth : 09.04.1986

Sex : Male

Marital Status : MARRIED

Nationality : INDIAN

Languages known : Kannada, English, Hindi, English, Telugu Address for communication : 23, 43/1, 2nd Cross, RRMR extension KH ROAD, Bangalore-560027,

SUMMARY:

An Electrical Design Engineer with background in design and good experience in Design, managerial activities, handling the team, internal department training. Confident, proactive and committed to provide results. Good interpersonal and communication skills.

Self-motivated, ability to work independently and as a part of team DECLARATION:

I solemnly declare that all the details provided above are true to the best of my knowledge and honesty. Thanking You

Place:

Date: Signature

Contact this candidate