Engineer Maintenance
Resume:
Emmanuel N. Amadi
Address: #** ****/**** **** ***********, Port Harcourt, Rivers State
E-mail: *******@*******.***, *******@*****.***
Tel: +234**********, +234**********
Skype: emmanuelsharif82
JOB ROLES:
PRODUCTION / WELL TEST/ MAINTENANCE/ DAQ ENGINEER
PERSONAL DETAILS:
Date of Birth: 4th May, 1982
Gender: Male
Marital Status: Married
L.G.A: Obio/Akpor
State of Origin: Rivers State
Nationality: Nigeria
Religion: Christianity
OBJECTIVES:
My zeal for technical safety and excellence in operations on client locations with the well-test/production team in spotting and rigging up of well test/production equipment at clients land, swamp and offshore locations. HAZOP, HAZID, spotting and rigging up of equipment’s, installation, maintenance, trouble shooting, servicing and repair of all surface well test and production equipment’s, rigging up and rigging down of surface well service equipment’s, carrying out of various tests and running early production facilities on clients flow stations
JOB HISTORY:
MILLENIUM OIL AND GAS COMPANY
PRODUCTION /DAQ ENGINEER – March 1st 2018
JOB SCOPE
Ensures continuous and sustainable upload of all the required production data and events (sequence).
Develops, reviews and updates workflows and procedures for production activities.
Assists in the preparation of equipment timelines, maintenance and inspection.
Performs technical analysis, diagnostics, providing inputs for the optimization of shutdowns and intervention events.
Analyzes and monitor the production event, shortfalls and loses.
Keeps close contact with the production department to follow up on the day-to-day behavior of the wells and implementation of necessary adjustments (MER).
Responsible for participating in all safety training and assisting in safety procedures such as basic first aid, CPR, fire drills and emergency evacuation; maintain an excellent personal safety and environmental record.
Maintains safety records such as safety meetings, emergency evacuation and spill response drills.
Meets and keeps current with required certifications, regulatory training, and compliance requirements.
EXPRO NIGERIA
PRODUCTION/DAQ ENGINEER – April 1st 2017.
JOB SCOPE
Oversees the daily operations on the platform, Collate data and sampling / rig up of DAQ equipment, conducts preventive maintenance on production equipment such as separators, heaters, flow heads, gauge tanks and monitoring processes to optimize production operations and ensures it is maintained within specified parameters
RESPONSIBILITIES
Understands and applies safety and environmental standards and actively encourage compliance by all personnel working in the area; demonstrate support of the company's health, safety and environmental goals to all personnel and contractors on site
Responsible for participating in all safety training and assisting in safety procedures such as basic first aid, CPR, fire drills and emergency evacuation; maintain an excellent personal safety and environmental record
Maintains safety records on items such as safety meetings, emergency evacuation and spill response drills
Meets and keeps current with required certifications, regulatory training, and compliance requirements
Maintains operational accountability and keep the supervisor updated on the production and operational status of the assigned area
Notifies the supervisor of complex production and maintenance issues which require corrective action
Communicates daily operational goals and needs effectively to operations personnel and supervisor
Reports all spills, near misses, injuries and property damage to the supervisor
Adheres to an established work schedule, attendance standards and punctuality to work and meetings
Takes ownership of actions and following through on commitments
Willingness to fill in as needed upon request
Assists maintenance crews with daily testing, repairs, and maintenance of all production equipment and safety devices
Reviews production, operation and maintenance reports and schedules to ensure timely and effective actions are taken to solve problems
Performs daily operational checks of process equipment, utilities, and secondary containment (daily rounds)
Identifies opportunities for improvements in production, cost efficiencies, problem areas (pump and motor failures, tank failures, electrical issues, chemical usage, etc.)
Operate, troubleshoot, and perform minor repairs on production equipment in a safe, economic, and environmentally sound manner with supervision; production equipment can include gas turbines, reciprocating compressors, gas dehydration systems, three phase separators, heaters, transmission equipment and pumps
Assists in the resolution of technical problems and safety issues
Participates in facility modifications and special projects as needed
Support Facility Engineers with redlines to P&IDs and Cause & Effects diagrams as needed during field initiated system changes (equipment, piping, valve, and instrumentation installation or removal).
FIRST SOURCE INTEGRATED ENERGY SERVICES
WELL TEST OPERATOR – 30th April 2016-1stMarch 2017
RESPONSIBILITIES:
I fully/competently rig up, operate and rig down various PWT Equipment, starting from Flow Head through Coflexip Hose, SSV, Data Header, Sand Filter/Trap, Choke Manifold, Chemical Injection, Steam Generator/Exchanger, Separators (shrinkage testing, LCV, PCV, DOF operations), Surge/Gauge/Storage/Tanks, Oil/gas Manifolds to Flare Stack/Burners/Booms, be it rig/rig less, onshore/swamp operations based on job design layout.
I fully handle PWT laboratory processes like: DAQ, BS&W, Gas SG, Oil SG determination.
Selecting equipment, developing a load-out procedure, based on Job requirement/objective and well conditions, this is more taking with swamp/offshore operations.
I handle Meter factor (MF) determination process.
I participate fully on site visit / inspection, Job design, Planning/preparation against every Job Mobilization.
Handling of Transfer(Volumetric)/Pressure(injection) pump operations.
I am consistently engaged as Back -up to the Job- Lead Engineer usually as Night Operation Lead (Crew supervisory/Client Relation roles)
I primarily shoulders every Job rig-up/rig down process and raise failure reports in event of equipment failure with the required follow up until close out
I render monthly equipment maintenance tracking/history cards of all PWT Equipment reports.
I am experienced fully on design-modifications/maintenance jobs on Oil and Gas flow stations.
I am delegated as part of a team to attend TESTWOP meetings - swamp operations.
Ensuring the all the above process is delivered in an outmost safe manner and within JHA recommendations where zones and equipment safe distances is emphasized..
Assist in putting together our Job reports.
EXPRO NIGERIA
MECHANICAL MAINTENANCE ENGINEER (WELL TEST) – 12th Nov 2012 – 13th March 2015
RESPONSIBILITIES ACHIEVED:
Maintenance planning, inspection, maintenance and troubleshooting of pipe-work,
SSV, Choke Manifold, Sand Filter, Separator, 5/3 Way Manifolds, Surface Test Trees, Compressors, Heat Exchanger/Indirect Heater, Surge/Gauge tanks etc.
Spotting and rigging up of well testing equipment at clients location, rigging up of instrument lines on the well testing equipment, installation, maintenance, service and repair of surface well test equipment’s while on location if any issues should arise.
Rigging up and rigging down of pipes and surface well testing equipment, carrying out of various tests and running of early production facility on clients flow station.
Function testing of ESD stations, Valve Specialist.
NAOC- Ebocha 23 land location- Well clean-up and testing
NAOC- Azuzama 4 Swamp –Well clean-up Multi-rate test
Mobil- Oso 22 Deep sea - Well Testing
NAOC- Samabri 12 Swamp location – Well Testing and clean-up
NAOC- Ogbanbiri Flow Station – Well Testing
NAOC-Ogbanbiri Deep-Well Testing
SHELL-Bonny(Oloma)- Wells 23,24,25,27,28- Well Testing
EXXON MOBIL- Abang 5A- Well Testing
SHELL-ALAKIRI 36 AND 37, (MRT)
KADUNA STATE (NYSC)
TECHNICAL INSTRUCTOR - 6TH JULY 2010-5TH JUNE 2011
Trained staff and technical students on 2d, 3d, engineering design
Evaluated safety concerns in an effort to determine methods e.g. engineering design to minimize risk for students, staff, and equipment.
Developed instructor guides, trainee guides, and job aids for classroom delivery.
JAMES AUTOMOBILES
MAINTENANCE ENGINEER - 15TH AUGUST 2008—30TH MAY 2010
RESPONSIBILITY:
Successfully serviced and maintained pumps, compressors, overhauling and general services, according to planned OEM specifications. Prepared long term and short term equipment maintenance schedules and procedures
Introduced the permit to work and MOC system to boost and upgrade the HSE system.
KCA DEUTAG NIG LTD
RIGGER - 1ST SEPT 2000--30TH SEPT 2001
RESPONSIBILITY:
Safe rigged all rig facilities to client location, Served as Banks-Man during rig move and other activities, ensured equipment colour coding and certification, signs out lift permits and PTW while ensuring red zone is clearly observed during lifting activities.
PROJECTS:
Well Test Maintenance Supervisor for refurbishing of Separators Planning/Operator and Turnaround Maintenance of EPF equipment’s.
PROFESSIONAL TRAINING:
C.O.C STCW 95 – Charkin Maritime Safety Institute - 2008
C.O.C Onshore/Offshore Industrial Rigging – Consultancy Unit, Rivers State University of Science Technology - 2008
P & ID/2D, 3D Engineering Design –Askab Technology - 2008
C.O.C OSHA -Vicno Edge - 2012
C.O.C Well Test 1- Expro Nigeria Limited -2013
C.O.C Well Test Maintenance Foundation Expro Nigeria - 2013
C.O.C Pressure Testing and Fittings –Expro Nigeria - 2014
C.O.C ASNT 2 - Gennesaret Resources Nigeria Limited - 2014
SKILLS:
Excellent knowledge regarding equipment, spare parts, operations and maintenance.
Excellent troubleshooting and problem solving abilities.
Excellent leadership, communication and motivational skills.
Able to do the physical work perfectly and easily.
Good practical and technical skills.
Good Communication skills.
Ability to work under pressure.
Ability to manage a varied workload.
Problem-solving skills.
Initiative to work without supervision or as part of a team.
Awareness of health and safety legislation.
Proficiency in Microsoft word, excel and PowerPoint etc.
Ability to inspect and ascertain fit for purpose parts and contact production centre on wrong mechanical seals or parts.
Maintenance of mechanical, pneumatic and hydraulic equipment’s
Pro-active Maintenance through Planned turnaround system e.g. QMS/CMMS
Maintenance, Inspection and hydro testing of different types of valves e.g. Balon Valves, Gate Valves, Relief Valves, Sand Filters, Flame Arrestors, Heat Exchangers, Boilers, Separators, Surge Tanks, Choke Manifold, Oil Diverters, Surface Safety Valves, Surface Test Trees, Well Testing and Completions,
Ability to read and interpret P&ID and Process Diagrams, Risk Assessment, HAZOP/HAZID.
Conducts levels 1, 2, 3, equipment maintenance according to OEM specification, Integrity checks/Hydro tests to ascertain equipment’s fit for purpose.
Updates critical safety and operational equipment database through loops and codes.
Signs out all lift plans and permits, and all documents before lifting and load out to client location.
Ensures all redundancy equipment’s are fully in operational.
Pigging during commissioning, in-service (cleaning and sealing), corrosion and metal loss.
EDUCATIONAL QUALIFICATION WITH DATE:
2002 – 2008 Rivers State University of Science & Technology,
Mechanical Engineering (B. Eng)
1989 – 1995 Boys High School, Nibo Akwa, Anambra State
West African Examination Council (WAEC)
GENERAL RESPONSIBILITIES:
Evaluate the equipment and components to test the efficiency.
Suggesting the improvement of equipment’s to ensure excellence in operations.
Ensures that repair work is done as at when due.
Evaluate the condition of machines to diagnose the problems.
Making the repairs and replacements wherever and whenever necessary.
Creating the proper schedules for the maintenance work.
Supervising and properly allotting maintenance procedures and responsibilities.
Prepare the estimations for maintenance works such as purchase of new spare parts.
Updating and upgraded with the new developments in the field and upgrading equipment’s.
Keeping the records of all maintenance and repair works.
Provide training to the new maintenance engineer trainees and assist them when needed.
Ensure the maintenance schedule is duly followed and the safety precautions as well.
Assures optimization of the maintenance organizational structure.
Analysis of repetitive equipment failures and root cause analysis
Estimation of maintenance costs and evaluation of alternatives.
Updates and co-ordinates personnel KPI and positive intervention programs
assessing the needs for equipment replacements and establish replacement programs when due.
Assessing required maintenance tools and skills required for efficient maintenance of equipment.
Assessing required skills required for maintenance personnel.
Reviewing personnel transfers to and from maintenance organizations.
Assessing and reporting hazards associated with manufacture and maintenance of equipment.
Inspection and conducting of levels 1, 2, 3 maintenance on equipment’s.
Conducts integrity test on equipment’s to ensure excellence in operation.
Ensures redundancy equipment’s are fully operational.
REFEREES:
Engineer AzundaWali
Halliburton International
Engr Philip Ekechukwu
Manager,
First Source Integrated Energy Services
Contact this candidate