Electrical Engineer Engineering
Resume:
CURRICULUM VITAE
Name B. MANOHAR
Date of Birth 22.04.1983
Nationality Indian
Position Senior Electrical Designer.
Qualifications Diploma in Electrical & Electronics Engineering. B.Tech from IGNOU (part-time accredited Dec -2016) Languages Tamil, English, Hindi.
Contact Number +91-988-***-**** (India)
Mail ID **********@*****.**.**
CAREER SUMMARY
Over 19+ years of experience in the Electrical Design Engineering activities for the Oil & Gas and Steel Plant Projects. Have handled Field Engineering support activities at Site for the oil & gas and Steel Plant projects. Leading & Working in a team of designers in the design and drafting activities, estimates, and drawings in support of engineering, procurement, fabrication, and construction activities. Supporting Lead Engineer with Schedules, reports and preparation of Calculations. PROFESSIONAL EXPERTISE
• FEED Engineering, Basic Engineering & Detail Engineering activities.
• Familiar with Area Engineering activities for Onshore & Offshore Oil & Gas and Steel Plants.
• Familiar with DNV, NORSOK, Shell DEP, NFPA, IEC codes, IEEE and BS/EN standards.
• Develop bill of material, prepare technical layouts and drawings for proposal estimation.
• Familiar with Technical Document Register (TDR), evaluate scope of work, assess number of drawings required, and establish design & drafting requirements.
• Familiar with Plot plans, General Arrangement (GA) drawings, Area Classification Drawings, and other discipline layouts.
• Participate in review of the format of delivery, time schedules and other requirements for execution of the work. Evaluate development method and software requirements AutoCAD, Micro station, PDS, PDMS, SP3D, and other design software.
• Check / Prepare layouts, 2D & 3D models, Single Line Diagrams, Schematic Diagrams, Logic Diagrams, Interconnection Schedules, Equipment, Cable Routing, Cable Trench/Tray, Lighting, Earthing/ Lightning and Heat Tracing Lay-outs, Installation standard drawings as defined in the scope of project & requirements.
• Perform layout clash/interface checks, identify conflicts, and take corrective action in co-ordination with other engineering discipline inputs.
• Issue engineering drawings and layouts for Inter-Discipline Checks (IDC’s) co-ordinate with other engineering disciplines in the integration of technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. CURRICULUM VITAE
Page 2 of 5
• Consult and make recommendations to Engineers on feasibility of design plans and layouts.
• Prepare material take off (MTO) for bulk materials from the design drawings/model. Supply Engineers with estimates for the required quantities.
• Prepare lighting, cable ladder/tray loading and cable trench sizing calculations.
• Provide clarification, guidance, and technical support to construction.
• Perform design changes and alterations based on Design Change Notices (DCNs) when required.
• Check/Prepare “As-Built” Drawings following completion of construction activities.
• Ensure conformity of designs and layouts in accordance to Company/Project Engineering procedures and ISO Quality Standards. Coordinate for uploading documents into “Documentum”, maintain and archive IDCs, originals, check prints & Master technical drawings in accordance to Company and quality procedures and ISO 9001:2000 QMS. Perform related duties as and when directed by Direct Supervisor. SOFTWARE SKILLS
AutoCAD, Microstation, PDMS, Smart Plant 3D (Beginner), Smart Plant Review, Navisworks Simulate / Freedom, MS Office, DiaLux, CG LUX, ChalmLite, Luxicon. PROFESSIONAL ACCREDITATION
• Safety, Basic Fire Fighting, First Aid, H2S training conducted by Qatar Petroleum.
• Training of Work Permit system for Work Site Supervisor in QP Onshore facilities.
• BOSIET course attend in Abudhabi GTSC Training center (Expired on sep-2016). PROFESSIONAL EXPERIENCE
Present Employment:
Employer: Lukoil Oil Company, Iraq, (Through SNC Lavalin - Kenz, U.A.E). From Feb. 2020 to Sep. 2020 Designation: Electrical Engineer.
CPF & Water Injection Well heads system projects (EPC Brown Fields)
Responsibilities:
Reviewed & comment for all EPC contractor Electrical deliverables. Previous Employment:
Employer: Worley Parsons, Qatar.
From Dec. 2017 to Nov. 2019 Designation: Sr. Electrical Designer.
Hamad Port Phase-2, Qatar (Detail Engineering)
Qatar petroleum Jet-A1, Qatar (Detail Engineering) Responsibilities:
Preparation of Lighting Calculation, Equipment layouts, Cable routing layouts, Earthing layout, Lighting/Lightning layouts, and Duct bank sizing for corridor allocation. CURRICULUM VITAE
Page 3 of 5
"As-Built" drawings preparation with QP ESD-10 and company drafting standards. Employer: Petrofac Engineering Services India Pvt Ltd, Chennai. From Dec. 2010 to Nov. 2017 Designation: Sr. Electrical Designer. Projects Handled:
Saudi Jazan Refinery and treatment plant, Saudi Arabia (Detail Engineering) Responsibilities:
Preparation of Cable routing/Earthing/Lighting layouts, Lighting Calculation & Material take off.
Saudi Arabian Oil Company – Hawiyah Gas Plant (Proposal) Responsibilities:
Preparation of Equipment layouts, Earthing layout, Cable routing layouts, Lighting Calculation & Material take off.
BorWin Gamma – 400/155/11kV HV/DC Offshore Converter Station Platform, Offshore Germany (Detail Engineering – Green Field)
Responsibilities:
Modelling of Cable trays / Equipments & Preparation of Cable Tray/cable routing/MCT/Earthing/Lighting layout.
Preparation of Cable Ladder/ Tray supports in 2D Drawing extraction, MTO reports from Model.
Kuwait National Petroleum Company (KNPC). Mina Al-Ahmadi (MAA) (Detail Engineering – Green Field)
Responsibilities:
Modelling of Cable trays / Equipments & Preparation of Earthing layout, Power/Cable routing & Material take off.
Reggane Nord Development Project, Algeria (Detail Engineering) Responsibilities:
Modelling of Light fittings & Preparation of Single line diagrams, standard Installation, Lighting calculation and Layouts.
BP Rumaila IPC & CPS Iraq project (Proposal)
Responsibilities:
Preparation of Equipment layouts, Earthing layouts, Cable routing, Single line diagrams, Lighting Calculation & Material take off.
Acid Gas Recovery Plant and Sulphur Recovery Unit, Qatar Petroleum (Detail Engineering – Field Engg. support)
Responsibilities:
Field Engineering support at Qatar site for Acid Gas Recovery Plant project Electrical & Instrumentation works.
CURRICULUM VITAE
Page 4 of 5
“As-Built” drawings preparation with QP ESD-10 and company drafting standards.
Dragon Oil (Turkmenistan) Ltd Onshore and Offshore Facilities Responsibilities:
Site verification of Single line diagrams mark up, Equipment data collection for Onshore and Offshore Facilities.
In Salah Gas Southern Fields Development Project (Detail Engineering) Responsibilities:
Preparation of cable schedule, Earthing layout, Lighting layout & Material take off.
Kuwait Oil Company - Elevated Substations in SEK (Proposal) Responsibilities:
Preparation of Equipment layouts, Earthing layout, Cable routing layouts, Lighting Calculation & Material take off.
Diyarbekir Oil Development Project, Central Diyarbekir - Platform-A (CPF-A) Offshore - PETRONAS Carigali (Proposal)
Responsibilities:
Preparation of Equipment layouts, Earthing layout, Cable routing layouts, Lighting Calculation & Material take off.
Acid Gas Recovery Plant and Sulphur Recovery Unit, Qatar Petroleum (Detail Engineering) Responsibilities:
Preparation of Single line diagrams, Equipment layouts, Earthing layout, Cable routing layouts, Lighting Calculation & Material take off. Employer: Larsen & Toubro Limited, Faridabad, India. From Oct 2008 to Dec. 2010 Designation: Sr. Engineer. Project Handled:
Rajasthan Oil Field Development - CAIRN ENERGY (Detail Engineering), Responsibilities:
Involved in FEED & Detail Engineering activities.
Preparation of Single line diagrams, Equipment layouts, Earthing layouts, Cable routing layouts, Lighting Calculation, Cable schedule & Material take off.
Hazardous area classification & Equipment selection.
Data sheets & other relevant document preparation based on project requirement.
Project standard Documents preparation for Technical library. Employer: Khafji Joint Operation (Aramco & KOC), Saudi Arabia, (Through Prumatech Ltd, India).
From Oct 2006 to Feb. 2008 Designation: Electrical Engineer Projects Handled:
CURRICULUM VITAE
Page 5 of 5
Saudi Aramco & KOC projects,
Responsibilities:
Preparation of Single line diagram, Equipment layout & Field verification of onshore and offshore.
As-built drawing preparation for all layouts with Aramco drafting standards.
Preparation of Hazardous area classification.
Preparation of Bill of Material (BOM) for electrical equipment’s. Employer: Qatar petroleum Onshore Facilities, Qatar, (Through Tyco Hofincons, India). From Jul 2005 to Oct. 2006 Designation: Electrical Engineer. Projects Handled:
Qatar petroleum Onshore Facilities,
Responsibilities:
Site verification of Single line diagrams, Electrical layouts, Equipment list.
As built preparation for single line diagrams and all layouts.
Vendor documents review for projects.
Preparation of spare parts interchangeability list for electrical equipment’s (BOM).
"As-Built" drawings preparation with QP ESD-10 and company drafting standards. Employer: Sumangala Steel Ltd, India.
From Jul. 2001 to Jul. 2005 Designation: Electrical Supervisor. Projects Handled:
Sumangala Steel Plant
Responsibilities:
Erection & commissioning of Steel Plant Electrical systems.
110/22kV Substation operation & maintenance.
Erection and commissioning of Distribution transformer and LT Distribution system.
Up gradation of Electrical induction furnace and its power and control circuits.
Having experience of Preventive & Shutdown Maintenance of Power Control Centre, (PCC) and Motor Control Centre (MCC).
Maintenance and Troubleshooting of EOT cranes.
Having knowledge in HT and LT switchyards.
Operation and maintenance of AC and DC drives.
Operation and Maintenance of Uninterrupted Power Supply (UPS), Battery Chargers, Battery Banks.
DECLARATION
I, the undersigned, certify that to the best of my knowledge and belief, these data correctly describe me, my qualifications, and my experience.
Place :
Date : [Manohar. B]
Contact this candidate