JOEL TAN LOPENA

Landline No.: +632******** Mobile: +639********* Email: adht0x@r.postjobfree.com

adht0x@r.postjobfree.com

Jobs Objectives:

BIM Modeler / AutoCAD Drafter – Architectural/Structural/MEPF/Oil & Gas 3D Renderer / 3D Modeler - Architectural

Job Summary:

Have 20 years plus hands on experiences with the AEC industry. Technical Skills:

Knowledge and experience of materials utilized in architectural, structural, mechanical, and marine and steel fabrications for project works Onshore-Offshore Platform works Oil-Gas industry.

Proficient in fabrication shop drawing with welding symbols use in welding joint detail for steel fabrication assemblies

Knowledge in quantity surveying and estimation for construction.

Understanding of methods, construction tools and procedures for shop drawing.

Can reading and understanding technical drawings and specification requirements.

Able to take survey quantities/estimation, material take-off quantities or BOM.

Can study, analyzed and comprehend blue prints and manually created.

Understand management and organizational skills.

Good communication and writing skills.

Open minded and able to work in pressure and in complex projects and environment Software Skills:

Knowledge software such as AUTODESK AUTOCAD 2D/3D, BIM-AUTODESK REVIT

(Architecture/ Structure /MEP) AutoCAD Plant 3D AND ADOBE PHOTOSHOPS.

Able to operate Microsoft Office tools such as Word, PowerPoint and Excel.

Can operate and send email Microsoft Outlook and Access.

Can operate also in printing, plotting, and photo copying machines. PERSONAL DETAILS:

Birth Date: March 28, 1967 Address: Monseratt Hills Street, La Milagrosa Village, Sex: Male Marikina Heights Marikina City

Marital Status: Married SSS No.: 33-1137261-5

Nationality: Filipino PAG-IBIG 1 No.: 121********* Passport No.: P3535508A Phil Health No.: 19-050698138-0 Dialect: English & Tagalog

Total Work Experience: 20 Years +

Summary Work Experience:

FREELANCER –

Manila, Philippines

April 2020 –

BIM MODELER / AUTOCAD DRAFTER - (Architectural, Structural, MEP scope)

Responsible for modeling the project and ensuring that all the entities in the model are complete.

Maintaining cleanliness of the model and ensuring that nothing-unnecessary visible lines are left.

Generating and drafts detail and drafting views that needed from manual drafting.

Documentation and information input in the model.

Generating required views for the documentation.

Preparing for data schedules.

Preparing for complete sheets.

Creating Revit families to load/insert in the components that used in the project file.

Creating 3D modeling and rendering by using Revit, Sketch up, Lumion and Enscape 3D.

Preparing working drawings from design concepts and hand sketches.

Preparing presentations, graphs, profiles to support project requirements.

Preparing floor plans, elevations, sections views, perspective, dimensions, door & windows schedules, and other architectural details for Architectural drawings.

Preparing foundations plans, floor layout framing plan, roof frames, plans, foundation details, rebar schedules, floor beam schedules, roof beam schedules, truss schedules and other structural details for Structural drawing.

Preparing also other trade services such as floor layout and details for Plumbing, Electrical and Hvac drawings.

Preparing fabrication and MEP drawings for Onshore/Offshore Oil & Gas Platform maintenaces.

FALCON EYE TECHNOLOGY, LLC. -

Abu Dhabi, UAE

07 July 2017 – 18 March 2020

BIM MODELER /AutoCAD Drafter – Electrical Low Voltage (ELV)

• Responsible for the preparation of Electrical and ELV Shop drawings with various level of detailing for shop drawings utilizing the Autodesk BIM Revit and AutoCAD. Responsible for the preparation of Installation detail drawings for Datacenter, MDF, and IDF rooms.

• Responsible for preparation drawings as per DPS, DEWA, and Civil Defense Regulation and issue for approval.

• Collaboration and assisting the Project Engineers and Project manager estimation department in taking quantities from the tender drawings.

• Making of Shop drawings for Overall Layout Plan for each floor, Single line Drawings, Schematic, Riser drawings, and Detailed Installations (CCTV/SCS/ACS).

• Incorporating the client’s comments on drawing and respond back to the IFC stage.

• Responsible for the preparation of detailed site quantities requirements based on the consultant's approved drawings.

• Collaboration with the Architect, Contractors, Project Engineers during the execution of the project.

• Collaboration with all other services like Architectural, Structural, and MEP work towards the successful completion of the project.

… Work Experiences (Cont.)

• Maintain drawing register and As-Built drawings after completion of the project.

• Labeling for all CCTV Cameras, Data Points, ELV Racks in the project.

• Responsibilities required for coordination from time to time as per instructions by the Project Engineers and Project manager.

• Using Autodesk Naviswork for coordination and clash detection together with the Contractors, Project Engineers, and other BIM Coordinators and BIM Modeler with their trade services were during project execution. Project Involved:

1. NAKHEEL Al Khail Mall with HOTELS

Owner: NAKHEEL PROPERTIES –

Consultants: DAR-Dar Phil-Handasah Consultants

(Shair and Partners)

Jumeriah Village Triangle – Al Khail Rd. Dubai

2. ZAYED NATIONAL MUSEUM –

Owner: Department of Culture and Tourism

Lead Design and Construction Supervision Consultant: Foster+Partners WSP

Consultant-Of-Record: WSP Abu Dhabi, UAE

Al Saadiyat Island – Abu Dhabi

VISION STEEL INDUSTRIES FACTORY - Abu Dhabi, UAE

28 October 2015 – 12 June 2017

BIM MODELER / AutoCAD Drafter –

Architectural and Structural (Fabrications scope)

Preparing Architectural and Structural with various level of detailing for shop drawings utilizing the Autodesk AutoCAD 2D/3D and Autodesk REVIT

Preparing and ensuring shop drawings to be in a proper manner based on the inputs and minimize the errors in all the shop drawings.

Assistance in Material Take-Off (MTO) or BOM for all the shop drawings done.

Shop drawings automatically have Material Take-Off Summary Sheet, which attached and keeping filed records in the Office/Projects Filing Systems.

Responsible for shop drawings submittals for the respective Company's clients based on the reviewed and approved by Senior Manager (Operations).

Responsible for daily or regular follow-up on the status of all the shop drawings submitted to the Clients.

Responsible for rectification and modification as per comments arising from the submitted shop drawings will always coordinate and discussed with the Senior Manager (Operations) on a regular basis.

Preparing revisions/changes to incorporate in shop drawings and checked, reviewed and approved by the Senior Manager prior to submission.

Responsible for all the stages of design/drafting – shop drawing, fabrications & assembly until as-built drawings. Ensuring to receive all the proper information from the Project sites for the IR/NCR/Commented drawings. Ensuring also to get the final approval/certifications.

Coordinating with Electrical and Mechanical Department, using Naviswork for Clash detections.

… Work Experiences (Cont.)

Project Involved:

1. Abu Dhabi International Airport Expansion South Terminal Owner: Abu Dhabi International Airport Enhancement Program – Terminal 3 - Check-in Expansion Area 1, 2, 3 & 4

2. Inter-Plast Warehouse Projects

Owner: Inter-Plast, ICAD 1 Mussafah Area, Abu Dhabi 10.0 x 10.0 m. Grinder Warehouse

3. Construction of CICPA Camps at

Shah, Abu Dhabi -

Owner: Al Hosn Gas Abu Dhabi Gas Development Company Limited Non-Structural Metal and Ornamental Works (Architectural Works) (8 Buildings)

Arab Tanker Services, LLC - Abu Dhabi, UAE

15 August 2005 – 30 August 2015

AutoCAD DRAFTER (2D/3D)

Onshore/Offshore Marine -Electrical Works

and Platform Structural /Mechanical

Fabrication Maintenance orks)

Responded to engineering change-related orders, requests, deviations, and revisions.

Coordinate the approval of drawings and responsible for the distribution of drawing documents

Preparing and updating site drawing for site survey Mubarraz Island both onshore and offshore underwater for submarine cable route.

Preparing drawing for temporary campsite project at the land with complete office facilities for site personnel, worker’s accommodations and mess room with kitchen.

Preparing layout design and engineering drawing for cable laying installation works

Preparing and arranging drawing of detailed GA of cable trenches and locations at land for the installation of crossing cables.

Prepared & updated drawings for design, fabrication, and installation of J-Pipes, conduits

& accessories.

Prepared pre-installation route survey and route marking drawing at land for cable laying.

Prepared drawing layout for marine marker buoy location for mooring position of marine transportation.

Producing final fabrication and erection drawings, including bills of material.

Produces shop/fabrication and installation drawings in aspect of structural as per instruction by Design Engineer and other mechanical-technical shop drawing need for fabrications as per instructions by Engineers and Site supervisors.

Project Involved:

1. Replacement of AR & GA Field Submarine Cables at Mubarraz Island 2. Replacement of Submarine Cable Laying & Diving Support Services 3. Design, Fabrication, Supply &Installation of J-Tubes, Accessories & Diving Support Services

4. Platform Work and Maintenance Installations at Offshore – Control, Instrument, Communication, Electrical, Piping & Mechanical, Civil Shore end Landing including Installation of Junction Box &Frame and Submarine Cable.

… Work Experiences (Cont.)

5. Installation of New Accommodation Container for Local Staff at CFP Trident-VII, Mubarraz- Oilfield

6. Comand & Control Room Container for DERA Program CICPA Authority

– Umm-Al-Dalkh Oilfield ZADCO

NS-NOVA STAR COMPANY, INC.- Pasay, Metro Manila

04 January 2005 – 10 August 2005

AUTOCAD DRAFTER – Architectural/Real Estate/Fit-Outs scope

Preparing and assisting design studies with Engineers in leading the recommended solutions together with general description of the Projects, for site development land and low cost housing project approval by the Owner.

Preparing preliminary for site layout plan, water and sewerage layout and road profile layout.

Conduct site inspections and checked quality of work materials for consistent with the drawing documents.

Preparing floor plan, elevations and section drawings, to fix and illustrate the size and character of the entire project and into complete construction plans and specification for the project,

Preparing and making settings for detail the work required for the architectural, interior, structural, plumbing, electrical, mechanical and other allied trade services for shop drawings.

Preparing and assisting material Take-Off for estimating works for the projects.

Organizing and keeping filed records in the Office/Projects Filing Systems.

Preparing revisions/changes and rectification as per Client’s comments and to ensure to be incorporate in shop drawings, for checking, reviewing and approved Architects and Engineers

SEGOVIA DESIGN ARCHITECTS – INTERIOR DESIGNER

Makati City, Metro Manila

May 2004 – December 2004

AUTOCAD DRAFTER – Architectural / Interior Designer

Preparing and assisting design studies with Interior Designer in leading the recommended solutions together with general description of the Projects, for site development land, interior designing and renovation housing project as per Client’s requirements and approval

Preparing quantity take-off for civil, interior and architectural works.

Going on-site inspections, checking quality of work and applied materials, to ensure the consistency with the drawing documents as per instructions by the Architect or Interior designer.

Arranged drawing of floor plan, elevations and section drawings, to fix and illustrate the size and character of the entire project and into complete construction plans and specification for the project, setting forth in detail the work required for the architectural, interior, structural, plumbing, electrical, mechanical and other allied trade services

EDUCATIONS : TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES, Manila, Philippines

B.S. IN ARCHITECTURE

REVIT / PDMS / AUTOCAD TRAINING AND SEMINARS

11 May 2018 - 3 August 2018 REVIT STRUCTURAL COURSE (WITH STAAD PRO) FILIPINO INSTITUTE – Certificates of Completion

Branch: FI GARHOUD – AL Dar University Campus

Al Garhoud. Deira, Dubai, U.A.E. Training Program - 36 Hrs. 11 May 2018 - 3 August 2018 REVIT MEP COURSE

FILIPINO INSTITUTE – Certificates of Completion

Branch: FI GARHOUD – AL Dar University Campus

Al Garhoud. Deira, Dubai, U.A.E. Training Program - 36 Hrs. 11 Jan 2018 - 30 March 2018 REVIT ARCHITECTURE COURSE (BASIC/ADVANCE/NAVISWORK) FILIPINO INSTITUTE – Certificates of Completion

Branch: FI GARHOUD – AL Dar University Campus

Al Garhoud. Deira, Dubai, U.A.E. Training Program - 36 Hrs. 05 May 2017 - 04 May 2017 Technical Education and Skills Development Authority (TESDA) CERTIFICATE (NCII) in TECHNICAL DRAFTING -

Completed the Competency Requirements under the Philippine TVET Competency Assessment and Certification System

With Certificate No. 170*********** under the Onsite Assessment and Certification Program for Overseas Filipino Workers (OFW) Venue: Filipino Learning Organization partner with Orient MCT Training Consultancy, Electra Road, Abu Dhabi, U.A.E. 22 July. 2016 - 19 Aug. 2016 REVIT ARCHITECTURE COURSE (BASIC/INTERMEDIATE) THE GLOBAL PINOY ACADEMY – Associated with

CAPITAL MANAGEMENT CONSULTANCY &

DEVELOPMENT CENTER- Certificates of Completion

Branch: Khalidiya, Abu Dhabi. UAE, Training Program - 24 Hrs. ACTVET NO. 194/2012 / I.A.A. ACCREDITATION

07 Nov. 2014 - 30 Dec. 2014 PLANT DESIGN MANAGEMENT SYSTEM – PDMS ZABEEL ENGINEERING ACADEMY- Certificates of Completion ZABEEL INTERNATIONAL Institute of Management & Technology AVEVA E3D1 PDMS 12.1.SP4

Branch: Shabiya Khalifah, Mussafah, Abu Dhabi. UAE Training Program 24 Hrs. Session Awarded to GRADE A/Government of

Dubai, UAE Ministry of Education – KHDA-196*-***-***-** Aug. 2006 – 15 Aug. 2006 MAGNACADD TECHNOLOGIES SCHOOL, INC. EDSA Starmall, EDSA-Shaw Blvd., Mandaluyong City

TESDA Accredited – CAV (NCR) No. 00-07986 Series

Certificates of Completion Modular Certificate in Autodesk Program AutoCAD Update 2007, 60 Hrs. Session

28 July 2006 - 02 Aug.2006 MICROCADD TECHNOLOGIES, INC. Don Mariano Building, Cubao, Quezon City

Certificates of Completion Modular Certificate in

Autodesk Program AutoCAD Update 2007

20 April 1997 - 20 July 1997 MICROCADD TECHNOLOGIES, INC. Don Mariano Building, Cubao, Quezon City

Certificates of Completion Modular Certificate in

Autodesk Program AutoCAD Release 13, 70 Hrs.

Contact this candidate