Piping Designer

RICHARD JENKIN

*** ********** **. *** ***** CA 281-***-**** **************@*****.***

SUMMARY

Experienced in the Design and Fabrication industry. Have work as a Piping designer producing FEED to detailed design deliverables for projects ranging from small to the world’s largest mega projects.

Offshore Oil and Gas Platforms

Offshore and Land Drilling Rigs

Naval and commercial Ships

Refineries / Plants

EDUCATION

Certificates and Degrees

·2016 SSL ShipConstructor

·2010 PDMS AVEVA Draft

·2006 PDMS AVEVA Cats and Specs

· 2007 PDMS AVEVA 11.6 Structural Design

· 2006 PDMS AVEVA 11.6 Piping

· 2001 100-ton Master U.S Coast Guard Captain

·Delmar College, Corpus Christi, TX 1988 A.A.S. Degree in Architecture Technology

Computer software

·AVEVA Marine PDMS AVEVA PIPING, PDMS AVEVA DRAFT, PDMS AVEVA Cats and Specs, PDMS AVEVA Structural, PDMS Review, CloudWorks scanning software, Navisworks, AutoCAD 10 thru 2017 3-D, CADWorx Plant 3-D, SSL ShipConstructor, Microsoft office

EXPERIENCE

2018-Present

General Dynamics/San Diego

Sr. Piping Design

Piping layout and 3-D modelling using AVEVA Marine for new build US Navy ship projects

Software: AVEVA MARINE, Navisworks Review

2017

PDMS Piping Layout Designer

Nashtec Plant: NHWL Engineering, Corpus Christi Texas

Layout of Process equipment systems using 2D and 3D software packages to produce drawings from concept through construction issue. Check piping system drawings prior to issue for fabrication. Design and Model of piping systems including supports using 3D modeling software; Aveva PDMS

Coordinated designs with other piping team members and with other disciplines. Evaluate vendor equipment for design applications and assist with equipment specifications and reviews. Examine and validate drawings for quality and compliance. Work with laser scan and "as-built" information and work into design. Field verify the model. On Site at the Client’s Plant to evaluate design options and take necessary measurements.

Software: AVEVA PDMS Piping, Navisworks Review Manage

2016

Ingalls Shipbuilding/New Orleans

Sr. Piping Design

Piping layout and 3-D modelling using AutoCAD Ship Constructor. Estimating material and scope of project for new build Navy and Coast Guard ship projects

Software: AutoCAD Ship Constructor, Navisworks Review

2013-2015

Shell Oil / New Orleans

PDMS Sr. Piping Design

Lay out of utilities for the exterior of Quarters Module. Developed and produced Source Water Piping Manifold, Fire Pump Manifolds and Essential and Emergency Generators hook-up. Interface with the subcontract architecture company and in-house Hull designers to assure that the connections between the quarters and Hull Top aligned. Preliminary Mechanical Handling studies items on the module and other equipment that requires to be pulled thru the module during fabrication. Prepared Navisworks models and presented at model reviews.

Software: AVEVA PDMS Piping, Navisworks Review Manage

2011-2013

SR. PDMS Layout

Worley Parsons Engineering / RDS, Houston, TX

Coordinate the Piping and multi-disciple Layout design of the Gravel Pack facility for Exxon Mobile Hebron project. Prepared and presented piping layouts and conceptual designs to solve complex problems. Reviewed all vendor documentation to assure compliance. Participated and conducted client vendor and work share reviews and meetings in Houston, Canada and Australia providing technical and team building support necessary to deliver the very complex project. Software: AVEVA PDMS Piping. AVEVA PDMS Structural, PDMS Draft, Navisworks

2010

SR. PDMS Piping Designer

Mustang Engineering, Houston, TX

Piping design for offshore Greenfield project. Prepared model and presented model review using AVEVA Review.

Software: AVEVA PDMS Piping, PDMS Draft, AVEVA Review

2010

SR. PDMS MDS Piping Designer

Worley Parsons Engineering, Houston, TX

Pipe support design for major Greenfield offshore project.

Software: AVEVA PDMS MDS, PDMS Draft, AVEVA PDMS Piping

2009

SR. PDMS Piping Designer

Mustang Engineering, Houston, TX

Piping design for offshore follow-on projects and Brownfield projects.

AVEVA PDMS Piping, Design Model review using AVEVA Review

PDMS Draft SR. PDMS Piping Designer

2006-2008

SR. PDMS Piping Layout Designer

Nobel Denton ODL, Houston TX / Dubai UAE

Developed a complete PDMS product model for Detail design of an NG2500x DP2 Multi-Service vessel. Conceived a full Drawing deliverable register. Provided mobile PDMS modelling support thru the design offices and on-site in the Fabrication facility during construction. Produced full set of Detail Design drawings for Piping Systems, Primary Structural, and Secondary Structural Outfitting. Coordinated all HVAC and Electrical space management using PDMS 11.6 to build a complete product model of the ship. Hosted Product Model Design Review using PDMS REVIEW

Software: AVEVA PDMS Piping, AVEA PDMS Structural, AVEVA Review, Navisworks

2006

Piping Designer

Onyx Engineering, Corpus Christi, TX

Piping design and drafting of refinery systems.

Software: AutoCAD 2005 CADWorx Plant 3-D

2005

Piping Designer

SBM Gusto MSC Ocean Design, Houston, TX

Piping design and drafting of the Semi-submersible FPU. Produced Piping Arrangements, piping standards and Piping Isometrics.

Software: AutoCAD 2005 CADWorx Plant 3-D

2004

Piping Designer

Keppel FELS / Boeing, Brownsville, TX

Piping design and drafting using AutoCAD 2004 of the SBX Boeing project. Detail design drawings of Marine piping and mechanical systems.

2003-2004

Project Designer Coordinator

Helmerich and Payne IDC, Tulsa, OK

Coordinated the piping design and drafting team for Helmerich and Payne’s modular drilling packages Rig 205 & 206 project Horn Mountain and Bullwinkle. Generated all drilling package arrangements, piping systems, electrical and equipment layouts with AutoCAD 2000 Rebis Pro Pipe provided field support during rig-up.

2003

Project Structural/ Piping Designer

Parker Drilling, Brownsville, TX

Designed and detailed steel outfitting items. Developed a full set of piping schematics from surveys and existing drawings, modified and repaired manifolds. Organized and managed fabrication subcontractors.

2002

Rig Surveyor / Piping Designer

Santa Fe Drilling, Saudi Arabia

On site survey and production of a full set of piping drawings and schematics for various Saudi drilling companies’ remote location drilling rigs using AutoCAD 2000.

2001

Structural Lead

Amfels, Inc., Brownsville, TX

Checked structural detailing for the Cal-Drive Q-4000 multi-service vessel. Supervised a team of draftsmen.

1995-2000

Designer Coordinator

Helmerich and Payne IDC, Houston, TX/ Corpus Christi, TX

Coordinated the design and drafting team of Helmerich and Payne’s modular drilling package of the Mobil Corporation’s “Jade” project. Supervised the production of FEED and detail design deliverables for the Helmerich and Payne package drilling rig to be used on the Shell TLP projects: Mars, Ram-Powell and Ursa. Supported the projects from FEED to Load out.

1994-1995

Structural Designer

Dreco Drilling Structures, Rosenberg, TX

Generated detailed steel fabrication drawings for Derricks and Substructures

1994

Structural Design Draftsman

Letourneau Marine Division, Longview, TX

Utilized AutoCAD 12 to provide detail fabrication drawings for Jack-Up drilling rigs.

1990-1993

Structural/ Piping Design Draftsman

Amfels, Inc., Brownsville, TX

Provided detailed drafting for variations of offshore and drilling structures and systems.

1988-1990

Detail Draftsman

Aker Gulf Marine, Inc., Ingleside, TX

Structural and piping detailing for the fabrication of Jackets and Decks for offshore platforms.

Contact this candidate