* * * *

Ronaldo I. Talibsao

Address: Farwaniyah, Kuwait

Mobile: +965-********, 90996016

E-mail: adhkf2@r.postjobfree.com

adhkf2@r.postjobfree.com

Application for the Post of Mechanical Jobs

Profile

Mechanical Engineer with more than 12 years experience in the Construction fields as a HVAC/Plumbing/Fire Fighting Engineer & Estimator and as a QC Inspector (Piping & Structural). Recognized as a resourceful, efficient, fast learner, hard working, cooperative and responsible employee with ability to carry out site supervision with good analysis of reading drawings, design capability, good written and communication skills, proven individually in project management and worked with a team of professionals. Highlights of Skills

● Good skill in application of Auto Cad . Prepare shop drawings & ability to execute Isometric drawings manually & by using AutoCAD.

● Coordinate the Design Consultant for submission and approval of drawings.

● Coordinate the Design Consultant for the changes and revision of drawings.

● Check & Prepare the BOQ & Quotation, QS. Review & verify the documents received are in accordance with standard & project specification.

● Coordinate Design Team for effective output of drawings & coordinate the possible interference between and among all trades.

● Obtain approval drawings & prepare technical responses as per client comments.

● Conduct inspection, line checking & punch list.

● Check and review construction drawings to reflect actual site arrangement.

● Proficient of designing VESDA System using VESDA Aspire Pipe Network Design Software

& FM 200 System using Flow Calculation Software.

● Proficient of designing Foam System & Kitchen Fire Suppression (ANSUL), Fire Hydrant, Spray System & Sprinkler System.

● Aware of Schematic diagram for HVAC, Piping, Plumbing & Fire Protection System.

● Preparing the relevant documents to Conduct Testing inspection such as Duct light testing for Ducts and Hydro test for refrigerant line and Plumbing works. Experience & Expertise:

As HVAC & Plumbing Supervisor:(2yrs)

● Ensure the HVAC Ducts, Fittings, accessories, pipes, fittings and necessary accessories are available and approved by Inspection department prior to installation.

● Ensure sufficient hand tools, power tools, ladder and scaffolding are available for installation.

● Coordinate with other discipline and ensure site clearance is available to start the HVAC

& Plumbing activities.

2 o f 4

● Monitor site activities to ensure quality of work is in compliance with approved shop drawing and Specification. Get daily progress report from site supervisor/foreman and update to project Engineer/Manager.

● To maintain all activities at site are carried out in accordance with the Company’s safety policies and procedures; ensure that appropriate safety and protective equipment is used by Company & Contractor staff.

● Conduct installation inspection & testing inspection such as Duct light testing for Ducts and Hydro test for refrigerant line & plumbing works.

● Responsible for executing isometric drawings based on the plan & actual routing of plumbing & refrigerant line.

As Fire Fighting & In-Plant Water Engineer (4yrs & 8months)

● Prepare shop drawings, P&ID & Isometric drawings using AutoCAD.

● Coordinate the Design Consultant for submission and approval of drawings as per KFD standard.

● Coordinate the Design Consultant for the changes and revision of drawings.

● Coordinate Design Team for effective output of drawings & coordinate the possible interference between and among all trades and develop the composite for internal works (inside the building), external works & underground discipline.

● Obtain approval drawings & prepare technical responses as per client comments.

● Submit & obtain approval drawings from Kuwait Fire Directorate (KFD).

● Conducted all the inspection including Testing & Commissioning.

● Check and review construction drawings to reflect actual site arrangement.

● Develop drawings such as; Schematic diagram & test package for Fire Fighting & In-plant water line.

● Responsible for the technical supervision and implementation of all field installation of In-Plant Water & Fire Protection System.

● Responsible & developed the drawings of the internal pipe support large bore (64” to 88”) for all the buildings of WDC II Azzour Project including the relocation of support based on the revised drawings of the pipe routing (Branches line). This includes the distance, elevation & all details.

● Responsible for the deflection of underground pipe (Ductile Iron). As System Designer & CAD Engineer For FA & FF(4yrs & 6months)

● Prepare shop drawings & ability to execute Isometric drawing using AutoCAD.

● Coordinate the Design Consultant for submission and approval of drawings.

● Coordinate the Design Consultant for the changes and revision of drawings.

● Check & Prepare the BOQ & Quotation. Estimator, Quantity Surveyor, Review & verify the documents received are in accordance with standard & project specification.

● Coordinate Design Team for effective output of drawings & coordinate the possible interference between and among all trades.

● Obtain approval drawings & prepare technical responses as per client comments.

● Check and review construction drawings to reflect actual site arrangement.

● Proficient of designing VESDA System using VESDA Aspire Pipe Network Design Software

& FM 200 System using Flow Calculation Software.

● Develop & obtain approval drawings for all Fire Protection System.

● Proficient of designing Foam System & Kitchen Fire Suppression (ANSUL), Fire Hydrant, Spray System & Sprinkler System and all Fire Protection System.

● Aware of Schematic diagram for HVAC, Plumbing & Fire Fighting. 3 o f 4

As Piping & Structural QC Inspector (More than 2yrs)

● Conduct line checking, installation inspection & punch list of the project.

● Checked and reviewed construction drawings to reflect actual site arrangement.

● Witness welder’s Performance Qualification Test, hydro testing, Mechanical Equipment installation and alignment, blasting, painting and insulation works.

● Responsible for checking lay-out of pipes and structural works and ensure the conformance Of all activities is implemented as per Standard drawing, Procedures & project’s Specification.

● Receiving the material delivery at site & provide material inspection report.

● Reviewed & allocate NDT required for Helang Platform (MSE Project). Project History

Project Name Date Company Location Position

Kuwait South Third Stage Construction

Corporation

Owner : MEW - Kuwait

Oct. 2018 till Date Kuwait Fire Fighting

Company

Kuwait Mechanical Engineer/

FF Engineer

New Water Centre, Kuwait

Owner : Kuwait Oil Company (KOC)

Oct. 2017 to Sept.

2018

GS Engineering &

Construction Corp.

Kuwait HVAC/Plumbing Supervisor

Maintenance of Azzour Water

Distribution Complex II, Kuwait

Owner : Ministry of Electricity and Water

(MEW)

Sept. 2012 to

April 2017

GS Engineering &

Construction Corp.

Kuwait Fire Fighting Engineer &

In-Plant Water Engineer

KEMS ZAJIL – TELECOM &

NETWORKING ( FM-200 SYSTEM, FAS &

VESDA SYSTEM )

MINISTRY OF INETRIORS KUWAIT –

SCHOOL ( SPRINKLERS SYSTEM )

KUWAIT OIL TANKERS COMPANY

( FIRE ALARM SYSTEM )

AL ZOUR SUBSTATION ( WATER

SPRAY, FM-200 & FOAM SYSTEM )

KUWAIT NATIONAL PETROLEUM

COMPANY ( FIRE ALARM & VESDA

SYSTEM )

MARKAZ & WAJDA - 33 SHELTERS

( FM-200 SYSTEM )

AL HAMRA – IRAQ PROJECT ( FM-200

SYSTEM)

DIA BEHBEHANI & KENETCO – 270

SHELTERS ( FM-200 SYSTEM )

KUWAIT INTERNATIONAL BANK

( FIRE ALARM SYSTEM, FM 200 & FOAM

SYSTEM )

MASHREQ BANK ( FIRE ALARM

SYSTEM )

QATAR NATIONAL BANK ( FIRE

ALARM SYSTEM & FM-200 SYSTEM )

MINISTRY OF DEFENSE ( FIRE HORE

REEL SYSTEM )

SALWA HOUSE ( FIRE HOSE REEL &

FIRE ALARM SYSTEM & FM-200 SYSTEM )

DOHA BANK, AL ARAAB UNITED &

AGILITY ( FM 200 SYSTEM)

MINISTRY OF COMMUNICATION IN

KAIFHAN ( FM 200 SYSTEM )

AL MUBARAK & FARWANIYA

HOSPITAL ( FIRE ALARM SYSTEM )

UNITED ARAB EMIRATES EMBASSY IN

KUWAIT ( FAS,PAS,EMERGENCY

Mar. 2008 to Sept.

2012

G4S Securicor

Kuwait

Kuwait Mechanical Engineer –

System Designer/Estimator

/CAD Engineer

4 o f 4

LIGHTS,EMERGENCY EXIT)

KUWAIT INTERNATIONAL LAW

SCHOOL ( FAS, EMERGENCY & EXIT

LIGHT, SPRINKLER

SYSTEM )

CIVIL DEFENSE ( FAS – FIRE ALARM

SYSTEM )

BOUBYAN TAKAFUL ( FM 200 SYSTEM )

EQUATE ( VESDA SYSTEM )

Fire Fighting & Plumbing

Project (Kuwait)

Sept. 2006 to Oct.

2007

PMCO(Safety &

Security)

Kuwait Site Engineer

Warehouse &

Housing Project

Oct. 2001 to Dec.

2002

Metro Industrial

Steel Works Corp.

Philippines QA/QC Inspector

Exxon Chemicals/BIRWELCO

(8 Furnaces)

Oct. 1999 to Jul.

2000

Malaysian Shipyard

Engineering (MSE)

Malaysia QC Piping Inspector

PERSONAL INFORMATION

DATE OF BIRTH : JANUARY 13, 1975

AGE : 45 Y/O

NATIONALITY : FILIPINO

ADDRESS : KUWAIT

CIVIL I.D. : 274*********

EDUCATIONAL BACKGROUND

COLLEGE

SCHOOL : TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES – MANILA DEGREE : BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING 1992 - 1998

SECONDARY

SCHOOL : SANTA ROSA EDUCATIONAL INSTITUTION – STA. ROSA, CITY 1988- 1992

PRIMARY

SCHOOL : CAINGIN ELEMENTARY SCHOOL – SANTA ROSA, CITY 1982 - 1988

TRAINING COMPANY : MEC ASIA CORPORATION / PIPING DRAFTSMAN

: JANUARY 1999 – MARCH 1999

CHARACTER REFFERENCES AVAILABLE UPON REQUEST

RONALDO I. TALIBSAO

APPLICANT

Contact this candidate