Plant Piping
Resume:
Shannan D. Wheeler
Crosby, TX 77532
832-***-**** - adhjta@r.postjobfree.com
Sr Piping Designer/Checker/Design Coordinator with 20+ years of design development experience in refinery and petrochemical plant piping design, natural gas metering, compressor stations, storage facilities, and production equipment design. Field experience with in-plant construction design and turnaround support.
• AutoCAD 2D/3D, AutoCAD Plant 3D, CADWorx Plant 3D/P&ID/Equipment; Isogen, Navisworks
• Microsoft Word, Excel, Project
• TWIC Card - Current to 2021
Mechanical Design Coordinator-US West Operations
AirSwift/TC Energy 11/18-9/20
• Oversee engineering and EPC designs for new build compression and metering stations, existing station upgrades and revamps, fall protection projects, air compressor upgrade projects, wastewater installation projects, and storage facility installations/upgrades.
• Ensure designs meet safety standards, adhere to TCE specifications, allow for safe and efficient working environments, are cost effective to TCE and client companies.
• Coordinate new drawing number creation by EPC, manage drawing database system.
• Oversee drawing sign in/out by coordinator staff.
• Attend and interact 30/60/90/IFC design review meetings to ensure project design standards.
• AutoCAD 2D and 3D; CADWorx 3D; AutoCAD Plant 3D; Navisworks Senior Piping Designer
NES Global Talent/Jacobs Engineering 05/18-10/18
• Full plant P&ID walkdown of the Limetree Bay Refinery and Storage Terminal in St. Croix, USVI.
• Responsible for verifying all piping, valves, vessels, tanks, columns, gauges and control circuits against current plant P&IDs.
• Mark up and detail deviations and changes not shown.
• Created new P&ID for 3” intermediate water header system and 2” plant air header for south tank farms, LPG refrigeration unit, dry dock and docks 3-9.
• AutoCAD Plant 3D; CadWorx 3D; Navisworks
Senior Piping Designer
Strategy Engineering 10/17-04/18
• Natural gas station design from design concept to operating unit. Office and field design experience with background in refinery operations. Crestwood Willow Lake 1 station upgrades including new dehy unit, new inlet piping, compressor inlet upgrades and new rack headers/bypass stations.
• Designed new Caprock compressor/process train for South Appaloosa Compressor Station #2. Five compressor layout and piping, new pipe rack/headers, receiver installation/piping, inlet separator, discharge filter, glycol tower, fuel gas conditioning skid and condensate flash skid with all interconnecting piping and valve layouts.
• AutoCAD; AutoCAD Plant 3D; CADWorx Plant 3D, Equipment, Steel; Navisworks Senior Piping Designer
Gulf Interstates Engineering 5/14-4/16
• New build engineering design of three compression/metering stations on Sabal Trail natural gas pipeline in Georgia and Florida. Responsible for detail design of each station and mainline valve sites. Designed layouts of all piping, production and compression equipment, structures, launchers & receivers and pipeline tie-in locations. Coordinated with client during design reviews on specifications, engineering change orders and model reviews. Coordinated drawing packages for IFA/IFC/BOM.
• Design new natural gas processing plant/storage facility for Cameron LNG. New build design, compression, metering, heaters, production equipment, valve layouts, well site piping.
• AutoCAD; CADWorx Plant 3D, Equipment, Steel; Navisworks Senior Designer
RDS Engineering 6/13-5/14
• Designed expansion for plastics manufacturing facility. In-plant planned demo of existing piping, established tie-ins, located new production equipment and vessels, new piping design, valve locations on site prior to turnaround. In-plant engineering support during construction.
• Laserscan of existing facility piping and equipment locations prior to expansion start up.
• Responsible for P&ID, piping isometrics, piping layout & detail drawings, equipment installation drawings and Bill of Materials.
• AutoCAD; CADWorx Plant 3D, Equipment, Steel; Navisworks Senior Designer
Englobal, Inc. 4/12-6/13
• Responsible for on-site refinery expansion/turnaround engineering at Wynnewood Refinery, Wynnewood, Oklahoma. In-plant demo & tie-in markings and drawings, P&ID walk downs, piping layouts, piping isometric drawings, structural drawings, Bill of Materials, engineering support during construction & turnaround on the following systems:
• Surge Tank installation, slurry pump piping from tower to pump stations, new steam boiler and associated header piping, fired heater piping, two new heat exchanger vessels with new structure, new larger air coolers atop distillation tower with associated piping, new complete plant-wide flare header system.
• AutoCAD; CADWorx Plant 3D, Equipment, Steel, P&ID; Navisworks Piping Designer
Energy Management & Services, Inc. 1/08-04/12
• Coordinated and completed new build engineering design for natural gas compression and metering stations for Trans-Canada, Kinder Morgan and Enterprise Products. Responsible for detail design of each station and mainline valve sites. Designed layouts of all piping, production and compression equipment, structures, launchers & receivers and pipeline tie-in locations. Coordinated drawing packages for IFA/IFC and Bill of Materials.
• AutoCAD; CADWorx Plant 3D, P&ID, Steel; Navisworks Designer
Hanover Compressor Company 10/05-9/07
• Redefined process for rental compression skid reconfigurations and engineering changes once compressor units returned from contract. Brought engineering revamps from company fabrication shops back to home office in Houston, Texas where quality control could be established and maintained.
• Responsible for design of three stage "Modular" rental fleet skid (ie: 3304/3306 NA & TA engines coupled with Ariel JG series compressors). This design allowed Hanover to streamline construction of small skid packages thereby saving 40% construction and labor costs on small skid manufacturing.
• Mentoring of junior drafters on company procedures, design standards and field work.
• AutoCAD; Codeware
Marine Drafter
LeTourneau, Inc., Longview, TX 6/03-8/05
• Performed design & drafting work on offshore drilling rigs. Responsible for draw works platform structure, crane mount structures, helipad designs, BOP work platform structures. AutoCAD Education
• Lee College – Baytown, TX
Associates of Applied Science, Drafting Technology
• Horn Drafting & CAD Centre – Houston, TX
References
• Charles Williams – adhjta@r.postjobfree.com; 304-***-****
• Shane Bracken – adhjta@r.postjobfree.com; 281-***-****
• Damon Lawson – adhjta@r.postjobfree.com; 281-***-****
Contact this candidate