Engineer Maintenance

CURRICULUM VITAE

Instrumentation engineer

Mumbai, India

Santosh Kumar Singh

Phone no: +919*********, +917*********

Email Id: adhihi@r.postjobfree.com

Career Objective:

I am looking for a good position in the field of Instrumentation engineering in a prestigious company where previous skills and capabilities can be put to efficient use. I possess effective organizational skills and the ability to supervise a team and develop the final output. Educational Qualifications:

(2007-2011) Bachelor of Technology in Electronics and Instrumentation engineering from (BIST) under Bharath University Chennai, India

Aggregate: 76%

PROFESSIONAL EXPERIENCE: 9 .2YEARS (INDIA-3.2Years, GULF-6.0 Years) Summary of Skills:

About 9.2 years of experience as an instrumentation and control system engineer in detailed maintenance,construction,pre-commissioning,commissioning development co-ordination of instruments and control system in Refinery, Gas plant, Oil station and steam plant. Having good knowledge and experience in metering system instruments and the control system. Having good knowledge in all types of smoke detectors, heat detectors and gas detectors. Configuring and faults diagnosis of DCS, PLC, SCADA, RTU, Profibus Communication, Analyzers and Control Loops.

DCS: Honeywell TDC 2000, Delta V and Centum CS3000 yokogawa Having good knowledge and experience in all types of instruments (TX, control valves, analyzer, detectors and switches.

Designing, Implementing and Commissioning of new control loops as per site requirements. Review of control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart Familiar with engineering standards ISA, IEEE, ANSI, IEC Preparing master data sheet for PM schedule; ensuring safe and efficient performing of CM Technical Support for the instrumentation team.

Experienced in the field instruments and control systems procurement activities Spares balance investigation and inventory control for all instruments spare parts Excellent communication interpersonal skills.

Organizational Experience (6.0 Years):

1. Previous company Instrumentation engineer in “SPECIAL TECHNICAL SERVICES (STS) PDO, OMAN”.

Site Hrsg, Amal steam plant, GGP, Yibal oil station, lekhwair gas plant, Mirrah glass point, PDO (Oman),oxy gas plant Block 62,Nrps,Anps shutdown. Job nature Construction, commissioning, pre-commissioning and maintenance Designation Instrumentation Engineer

Duration from June 2014 to june2020

Reporting to site manager

Special knowledge and skills:

Manpower planning and mobilization, material planning and its flow control, safety co-ordination, attending safety and progress meeting co-ordination with managers and clients. Having good knowledge in P&ID diagrams, cause and effect diagrams and loop folder. Reviewing vender documents and making loop folder for vender packages. Having good knowledge of functional block diagrams, logic diagrams, I/O cards, communication cards, FCS, IPS, DCS, IFB and marshaling cabinets etc. Redundancy check and functional checkup of ESD & FGS systems controllers, I/O cards and diagnostics checks etc….

Identify tools and test instruments required for performing various activities and data sheet, check list for their procurement,

Familiar with engineering standards ISA, IEEE, ANSI, IEC. Worked on Ariel compressor, GE compressor, BHEL Gas turbines, Different types of pump, Boilers, Purge air fan, Barrier air fan, HPU…

ABB 800XA I/O Card, CI Card Relay cable Marshalling and Loop check Rectify online alarm, quick alarm, low alarm, high alarm, low low alarm, high high alarm and troubleshooting.

Gas chromatograph (Emerson, Honeywell), analyzer house, water cut meter (Emerson) ABB Oxygen analyzer system with ZGP2 probes Maintenance and Calibration. Humidity and moisture analyzer.

Auto calibration and tuning of HART protocol positioner such as fisher 6010, 6020 etc. All types of smart field instrument installation, maintenance, erection. Participate in DCS & packages Instruments FAT/SAT preparation, Equipment creation and spare planning in SAP.

FF and F&G Devices Installation and checking work. Necessary corresponding with `different vendor regarding field Instrument Reliability Issues.

Dealing with Different contractor for Instruments project execution. Procurement work of field instruments, preparation &review of Instrumentation Datasheet, vendor document.

2. Previously worked as Instrumentation Engineer in PCT (INDIA) PVT LTD, JAMNAGAR GUJARAT, INDIA (3.0Years)

Site Reliance Industries Ltd Jamnagar (Gujarat).

Designation Instrument and Control Engineer.

Job Nature Maintenance and Operation

Duration from May 2011 to June 2014

Reporting to site in Charge

Having experience of Installation, and instruments(like PT,LT,TT,FT,control valves,esd valves,MOV,SOV,NV,T/C,RTD,all types of switches, Gauges). Having experience in Delta v (ver.9.3) DCS with FF such as instruments installation, calibration, commissioning, De-commissioning and configuration of the system etc.. Having the good knowledge on MODBUS serial communication, Ethernet communication and RS232, RS485 communication.

Commissioning the HART and FF bus digital valve controller (DVC FISHER) with partial stroke test for the ESD and BDV valves.

maintenance and calibration of the control valves(Pneumatic valve, Bleed valve,Mov,Nrv,Flowserve,Airtorque,Valtek,Masoneilan,Aumatek,Bettis) Experience in flow meters configuration (electromagnetic, orifice plate, ultra- sonic turbine, mass flow meters) of ABB, Rosemount, and Krohne.

Overfill protection controller esu2.

Bentley Nevada Vibrations 3500 & Speed monitoring System. Automatic Fire Alarming System.

Operate Honeywell DCS, DELTA V.

HART : EMERSON Hart Communicator.

Switches & TX : Flow, level, Pressure, Temperature, DPT, proximity. Gauges : Pressure, Temperature, FLOW.

Detectors :Smoke and Fire Detectors, Open Path,H2S detector,Infra- red ultra voilet,Point gas detector,Hydro-carbon,BGU,Flame scanner, Flame sensor. Rotork & Auma: Motor Operated Valves calibration and Maintenance Analyzer house.

Valves and Actuators:

Fisher Betties, Valtek, Flowserve, Masoneilan, and Mokveld: Control valve actuators, Air Lock Relay, Positioner, Position Transmitter Calibration and Maintenance PSD, BDV, Anti-surge valve, ESD. Norgren, Asco, and Maxseal: Different type of Actuators, Solenoid valves, Limit Switch, ON/OFF Cylinders, Regulating Power Cylinders servicing and Maintenance. Rotork & Auma: Motor Operated Valves calibration and Maintenance. Installation of speed sensor,switches,vibration controller,relay logic,transducer,control valves,electric circuits,panels,cable laying,glanding,termination,tray work etc… 3. Hyperion It Pvt Ltd, worked as Instrumentation engineer (2 months) Site Essar oil ltd, Vadinar (Gujarat).

Designation Instrument Engineer.

Job Nature Maintenance and Operation (Shutdown)

Duration from March2014 to May 2014

Thermocouple, Rtd, Afr replaced

ESD, PVV, BDV maintenance and replaced

PM and CM report submit to site in charge

TRAINING:

PTW, FIRST AIDER, AGT, CONFINED SPACE ENTRY, H2S, IFR(PDO) IT Skills:

Operating systems : WINDOWS XP, 7, 8, NT, 2008 Server Programs : Office Tools, MS Office, Excel, Power point. Internet : very good

Programming language: visual basic, c, c++.

Additional Qualities:

Logical thinking and taking quick decisions in solving problems. Hard Working, Self Motivated & Self Confident in nature. Personal Profile:

Full Name : SANTOSH KUMAR SINGH

Father Name : RAMAKANT SINGH

Date of Birth : 02 FEB 1987

Gender : MALE

Civil Status : MARRIED

Nationality : INDIAN

Languages Known : HINDI, ENGLISH

Passport Number : K9296659

Issue date : 14.01.2013,

Expiry date : 13.01.2023(Patna)

Permanent Address : Vill+P.o-Boxa (802103), Distt+P.s-Buxar, 802103 State-Bihar, INDIA

Declaration:

I here by declare that all the facts afore mentioned are true to the best of my knowledge. Yours faithfully

Place: MUMBAI SANTOSH KUMAR SINGH

Contact this candidate