Engineering Engineer

RESUME

S.Veerabagu,

*, ******** ******, **** ********** Vinayagar Kovil,

Tiruchendur -628215, Tuticorin District.

E-Mail id: ********@*******.**

Mobile : 844-***-****

Professional objective

To achieve a responsible position in your esteemed organization, where I can utilize my skills and talent; and be a part of the team that works towards the success of the organization.

Educational Qualification

Year Course School/College Board/University Percentage 2000-2002

M.E

(Material

Engineering)

National University of

Singapore

(Mechanical

Engineering Dept.)

National University

of Singapore

CGPA

4.5 / 5

1998-2000

M.E

(Material

science)

Regional Engineering

college Trichy

(Metallurgical Dept.)

Regional

Engineering college

Trichy

CGPA

8.9 / 10

(univ 2nd

)

1996-1998

M.Sc

(Materials)

Anna university

College of Engineering

Guindy

Anna university

College of

Engineering Guindy

CGPA

8.9 / 10

(univ 2nd

)

1993- 1996

B.Sc

(Physics)

Aditanar college of Arts

and Science

Manonmaniam

Sundaranar

University

89.5%

(univ 2nd

)

1993 H.S.C

Central School, Kayal,

Tiruchendur

Tamil Nadu,

State board

84.3%

1991 S.S.L.C KHSS, Arumuganeri CBSE 77.8%

Personal traits (major strength)

Sincere, hardworking.

Enthusiastic, Competitive and responsible.

Highly adjustable with good leadership qualities. Experience

Total Years of Experience

18 years. (8 years in Aker solutions, Pune India and 10 years in Singapore) My work experience details in Singapore at Aker’s supplier site: Refer Appendix 1 My work experience details in India at Aker solutions Pune : Refer Appendix 2 AKER SOLUTIONS (May 2012- Sep 2012)

Designation: Supply Chain Coordinator

Product group: TTMC

AKER SOLUTIONS (From Sep 2012 – Feb 2013)

Designation: Quality Surveillance Engineer

Product group: Riser

AKER SOLUTIONS (From Mar 2013 – Mar 2016)

Designation: QS Lead / Engineer

Product group: Angola.

AKER SOLUTIONS (From Mar 2016 – till now)

Designation: Senior Engineer

Product group: Cross PLM.

Specialized Experience

Review/approval of below,

All raw material certificates

CTOD Test Certificate

Ferrite content/count certificate

Impact test certificate

Macrograph examination certificate

Material Inspection certificate - EN

10204 3.1

Material Inspection certificate - EN

10204 3.2

Material Traceability

Micrograph Examination certificate,

photographs

Pitting corrosion Resistance test

certificate

Positive Material Identification

certificate

Heat treatment chart/report/procedure

Testing

Non Destructive Examination

LPI

MPI

UT

Coating

Tungsten Carbide

Nickel Plating

Chrome Plating

Copper Plating

Xylan

Cadmium

Phosphating

Moly coat

Others

Heat Treatment

EDM, Shot Peening & Gun Drilling

Electro-Chemical Deburring

Skills Developed

SELECTED INTERNATIONAL PUBLICATIONS & PRESENTATIONS

• Veerabagu S., Fujihara K, Dasari G.R, Ramakrishna S, Material Research Society - Spring Meeting, San Francisco, California, 2002.

• Veerabagu S., Dasari G.R, Ramakrishna S, Tenth Annual Symposium on CM Methods” University of Texas south western MC, Texas, 2002.

• Veerabagu S., Fujihara K, Dasari G.R, Ramakrishna S., Composites Science and Technology, Volume 63, Issues 3–4, February–March 2003, Pages 427–435 Computational Skills

• Statistical & Productivity Applications - MS365

• Operating Systems - Windows 10

• CAD-CAM software - ABAQUS 5,PATRAN, Cadence, Ansoft

• Languages & Mathematical software - FORTRAN 90, Pascal, C++ SELECTED ACADEMIC DISTINCTIONS

• Recipient of Research Scholarship from National University of Singapore, Jan 2001 - Dec 2002.

• University 2nd rank holder in M.E. Regional Engineering College, Trichy, India.

• University 2nd rank holder in Materials science degree in Anna University, Chennai, India.

Personal Details

Name : S. Veerbaagu

Father’s name : Suyambulingam

Gender : Male

Age : 44 years

Date of birth : 11 March 1976

Nationality : Indian

Religion : HINDU

Marital status : Married with 2 children

Permanent

Address : 7, Sannathi street,

Tiruchendur

Tamilnadu – 628 215. India

Email : *********@*******.**

Appendix 1

Involved in meeting the needs of Petroleum Manufacturing Industries and involved in supplying high quality components to them. Contributed to the oil & gas customers through my technical competence and created a results-oriented process. Involved in Turnkey solutions and committed in meeting the needs & specific requirements of oil & gas industry. Acquired knowledge about total Wellhead and Christmas Tree Equipment components.

Have strong skills in handling all the

quality documents (including material &

process, CMM, etc..)

Have strong knowledge in

• The documentation specification

requirements of API6A

• Material hardness testing

documentation as per ASTM E-140

• Tolerance requirements as per ISO

2768-1

• Quality control, CNC datum,

processes of wellhead and

chritsmas tree, gasket rings

• 6 sigma concepts, AQL

• Manifold material process as per

AISI, BS EN requirements

• Material faults, material and

machining issues, manufacturing

process plan

• Material properties(including QTC

requirements) and AKER solutions

specification requirements for

material certificates.

• All non-destructive testing and

destructive testing requirements

• NORSOK requirements

Customer drive:

(1) Customer needs were clearly identified

through their specifications and top priority was

provided to the client / counterparts.

(2) Because of full integration with the team, the project execution was improved.

(3) Because of full integration in the day to day

activities, counterparts had accepted my

comments which was managed well in advance.

(4) As my comments had already identified all the

quality issues, reworks were avoided due to

proactive action.

MY working relationships

1) Being assertive and by taking the attributes of a leader

2) Focus on conflict resolution

Delivering quality results:

(1) Consistently delivered on-time results (refer

the OTD KPI ) and the achievement was because

of implementing new ways of problem solving

techniques.

(2) Objectives were delivered with unique

achievements.

(3) Took full responsibility for all my comments

submitted to counterparts as well as to

procurement team.

Viewed all conflicts as my own fault and focused

on more practical approach.

A win/win approach rests on strategies involving:- Understanding underlying needs.

Having awareness of individual differences.

Being flexible in changing your stance bases on

3) By proper decision making and learning

4) By proper language and communication style

5) By managing myself and the performance of the

team.

■ By proper communication and information,

cooperated with in my team

■ Supported my colleagues

■ Got support from my leader

People and teams:

(1) Regarded as a key contributor to the team.

(2) Encouraged input from others and actively

contributed to the team with constructive

feedback.

(3) Sticks to own views based on the international codes and standards. Got proper feedback from

counter parts.. Technical inputs & concepts were

provided to co-workers and design engineers

related to my products.

(4) with my teams followed below,

a) Mutual trust

b) Mutual Celebration

c) Mutual concern

d) Mutual respect

e) Mutual support

and finally looking into the emotional status

of the individual.

critical information that is shared.

Focusing on the problem and the people.

Hands on management

(1) There was a deep understanding on the

international standards and our own specification

and very attentive to the details provided by all

means.

(2) KPI was consistent throughout the period

along with efficient work execution. Challenges

were solved based on knowledge based decisions.

(3) Respected decisions based on knowledge and

creative thinking.

(4) Details were taken from specifications along

with international codes and standards.

Challenging comments were provided to

procurement which were accepted by our

counterparts.

(5) Decisions were successful as it was knowledge

based.

HSE mindset

(1) There was a full integration in all actions and decisions in HSE perspective from my side.

(2) I was fully compliant with HSE best practices

and procedures.

(3) Already implemented with full effort into HSE

best practices and procedures from my side.

(4) Already I took responsibility for actions which lead to situation unacceptable for HSE risk

APPENDIX 2

In Aker solutions, products handled by me

are

• Seamless pipe straight ( MaCS

2010102 )

• Seamless pipe bent ( MaCS

2010103)

• Flange (MaCS 2010501 )

• Elbow (MaCS 2010502 )

• Pipe support (MaCS 2010503 )

• Straight Tee/Cross (MaCS

2010507 )

• Reducing Tee/Cross (MaCS

2010508)

• Round bar forging (MaCS

2030401)

• Hollow Cylinder forging (MaCS

2030403)

• Block forging (MaCS 2030404)

• Forging – Geometry specified by

Drawing (MaCS 2030404)

• Casting – Geometry specified by

Drawing (MaCS 2030404)

• Tarpaulins (MaCS 1021100)

• Box (MaCS 2060401)

• Case (MaCS 2060402)

• Crate (MaCS 2060403)

• Chemicals (MaCS 20708001,

20702001)

Before standardization of the cross-PLM product

thorough study of product were carried out.

Which included study of existing material grades,

design specification, criticality based its usage i.e. subsea / nonsubsea, traceability requirements,

Industrial standard practices, manufacturing

methods, Aker and International specification;

documentation requirements as per current

SDRLs & DNV RP O101 for particular product

type.

Also involved in, reviewing existing

X-PLM: Standardization of at least two products-

Standardize all the material numbers used in

ongoing project

■ Agreed with partner on when the milestone and

updated data in SAP using ECR process

■ Mass uploaded in SAP and followed effective

out procedure for obsolete of duplicate materials

X-PLM: Take Responsibility/Accountability of

Product

Used Engineering Change (EC) process and

shifted SAP material from KOPM classification to

MaCS. It also involved review of existing

characteristics, compared with the new

characteristics, performed clean-up of

characteristics, removed wrongly classified

materials, assigned MIR to the materials and

moved materials to MaCS after approved by me &

global owner (if any).

Took full accountability of the Standardized

product, reviewed NCRs, pre-production

documents, helped buyers and suppliers in

Technical queries

■ standardization of documentation

• Minimized documentation from suppliers

(based on DNVGL RP O101)

• Minimized witness points

■ As advisor: Helped design team to select correct product

• As technical reference on POs: Handling

suppliers queries more efficiently and correctly

■ • Increased efficiency in Project Execution

• Reduction in Price

• Improved Inventory Management

• Increased Product Quality

• Trust on Products

APPENDIX 3

I am familiar with the elastomeric seals and elastomeric compounds which are used in the production of molded seals (material nitrile (NBR)) My knowledge in polymers

1. "Polymer Chemistry/Synthesis"

2. “Polymer Physics"

3. "Polymer Technology and Processing"

4. "Properties of Polymers“

5. “POLYMER + COMPOSITE MATERIALS

My research work published in,

S. Veerabagu, K. Fujihara, G.R. Dasari, S. Ramakrishna mailto:*****@***.***.**

Faculty of Engineering, The National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore

Abstract

Composite plates made of braided composites have low elastic modulus compared to conventional metal plates. This low elastic modulus of ensures only a part of load is transferred through composite plate. It is necessary to calculate magnitudes of strains induced in composite plate system subjected to loading. The results from stress–strain curves of the composite indicate that at 1% strain, there is no danger of fibre and matrix separation. The suitability of a braided carbon–epoxy composite for composite plate application is studied.

Declaration

I hereby declare that all the details furnished above are true to the best of my knowledge. If I am given an opportunity, I will stain my every nerve to add value to your organization.

Place: Tiruchendur. Yours truly,

Date: (S.Veerabagu)

Contact this candidate