* ******* ******,

OKUNOLA, EGBEDA LAGOS

NIGERIA

Phone

234**********

Email :adhc5e@r.postjobfree.com

adhc5e@r.postjobfree.com

ONIBUDO OLAROTIMI JOSEPH

Summary of key

Competencies:

Highly skilled and reliable COREN Registered Lead. Instrument & Control Engineer with 22 years of industry experience in Instrumentation & Control engineering Experience in onshore, offshore, FPSO Strong knowledge and understanding of process control, Safety System and Fire &GAS System (PAS, SIS, FGS, PLC, DCS, and SCADA). Strong knowledge on Filed Instrumentation selection and specification as well as hydraulic, pnuematic, electric, electronic control systems and communication modes. Strong knowledge on Safety, Fire and Gas detection, Publick Addressing, Security and Telecommunications Systems. Familiarity with originating, reviewing and checking documentation for technical accuracy, precision and consistency

Control Systems Architecture, ESD Logic, Hook-Up, Wiring Termination, Schematic Wiring, Loops, Cause & Effect, SAFE Charts, Equipment Layouts, Cable Schedules, Indexes, MTO, I/O Lists, Field Instrumentation Datasheets and Specifications, Control Philosophies and Control Systems Specifications."

Experienced in Pneumatic/Electronic Instrumentation, Distributed Control system (DCS) and Programmable Logic Controllers (PLC). Highly experienced in working with Systems such as an Emmerson Delta V System, Yokogawa Centum VP, Honeywell System( Experion® Process Knowledge System (PKS) C300 Controller & Safety Manager System) Foxboro IA Systems, Allen Bradley PLC, Siemens PLC system, SCADA system, Triconex system, HIPPS and Triple Redundancy system Implementation.

Strong knowledge and extensive experience in process control, Control Systems (PLC, DCS, and SCADA), safety systems (ESD), Communications System, Networks, Fire Systems, PA, Analyzers, Metering Stations, Wellhead Control Panels, Specifications, Field Instrumentation Datasheets, Wiring Diagrams, Loops Diagrams, SAFE charts, location plans, calculations, control logic, indexes, control philosophies, etc." Proven capability for managing a large number of personnel and ability to manage complex technical situations, as well as familiarity with industry practices and current technology. Experienced in scheduling and prioritizing the work for the team to achieve the deadlines of the project. Experienced on control and reporting progress, preparations of reports and project administrative work.

Experienced in Procurement support (Requisitions, Technical Bid Evaluations), Vendor Documentation review. Experienced in the application of relevant design basis, procedures, country regulations, industry codes and standards. Well of experience in the Construction & Installation, commissioning and Start-up. Important Professional Certifications /Memberships: Council for the Regulation of Engineering (COREN) with Registered Number ( 23729) Nigerian Society of Engineers (NSE) with Membership number (25083) World Federation of Engineering Organisation with Membership number WFEO-25083 Federation of African Organizations of Engineers with Membership number FAOE-25083 Instrumentation, Systems and Automation Society (MISA) with Membership number

(33042179)(2007)

Institute of Electrical Electronics Engineers (MIEEE) with Membership number

(90300410)(2007)

Institute of Electrical and Technology (MIET) with Membership number

(90944678)(2007)

Software Capability:

INTOOLS (Smart Plant Instrumentation – SPI),Project management software (In controls) AutoCAD,Microsoft office applications (Word, PowerPoint,Access,Visio and Excel),Proven ability to perform control valve sizing with the fisher Firstvue Software,Smart Plant Mariam (SPM) (For Material Requisition) & Smart Plant Foundation (SPF) for Documentations,, InstruCal and Flow Calculator,Dresser Consolidated SRVS for PSV Sizing,Fieldbus design tool software (MTL& P&F), Segment Design checker

Objective To be one of the best high-level Professionals in my chosen career. Date of Birth 10th of December 1975

Sex Male

Nationality Nigerian

State of Origin Ondo State

L.G.A Akoko North/West

Contact Address

4 FASHOLA STREET, OKUNOLA, EGBEDA LAGOS NIGERIA

E- mail address adhc5e@r.postjobfree.com, adhc5e@r.postjobfree.com Phone number 234-***-****-075

Education MSC in Project Management Walden University, Minneapolis, Minnesota,USA (in View) B.ENG (2.1) in Electrical /Electronic Engineering, University of Port Harcourt, Nigeria.(secon class upper division) (2006).

SITP/2 Shell Intensive Training Program (SPDC)Port Harcourt, Nigeria.SITP/2 Certificate a London City & Guilds Certificate (final level)in Instrumentation Technology & Production Operation (2003)

HND in Electrical /Electronic Engineering (Electronics Option)Yaba College of Technology, Yaba, Lagos Nigeria (2001)

ND in Electrical/Electronic Engineering, Federal Polytechnic Ado-Ekiti, Nigeria,(1998) S.S.C.E (1995)

Professional

experience

MAKON GROUP Lagos, Nigeria. (October 2011 till present.) Job Titles: COORDINATING LEAD Instrument Automation & Control Engineer Projects 1: DOMGAS PROJECTS

Project summary: To build gas handling facilities of various capacity to provide domestic gas (DOMGAS) to local industries and power plants. 1. Utorogu gas handling facility (nag2) (150mmscfd) 2. Agbada NAG gas handling facility (80mmscfd)

3. Adibawa ag solution (5mmscfd)

4. Bonny ag solution (5mmscfd)

5. Egbema west ag project(5mmscfd)

6. Egbema west nag project(50mmscfd)

7. Alakiri gas handling facility (120mmscfd)

8. 3u’s project(15mmscfd)

Position: LEAD INSTRUMENT, CONTROL &AUTOMATION ENGINEER Client: Shell Petroleum Development Company

Responsibilities

Lead Instrumentation & Control Engineer: Responsible for the Instrument, Control & Automation (IC&A) systems of the projects which cover the FEED, Detail Engineering Design, Procurement, Prefabrication,Construction/Installation, commissioning, start-up and maintenance for all the above listed projects

Persnal Accomplishements/Contributions on the Projects Design all the PAS, SIS& FGS for Plant

overall project estimating and basis of design and control philosophy definition Inter-discipline coordination and technical direction, client interface, project management and inter discipline interface

Preparation and checking of design specifications, datasheets and drawings Review and Approve all I&C deliverables

Review and Approve all I&C deliverables for Vendor packages Provide Installation &Construction Support

Provide commissioning Support

Provide Start-up Support

Projects 2: NLNG CENTRAL CONTROL ROOM CCR UPGRADE PROJECT Project summary: Upgrading of the existing Foxboro I/A DCS and make ready for Train 7+

(space in OCC and CRAR only)

Position: LEAD INSTRUMENT, CONTROL &AUTOMATION ENGINEER Client: Nigeria Liquified Natural Gas Limited (NLNG) Responsibilities

Lead Instrumentation & Control Engineer: Responsible for the Instrument, Control & Automation (IC&A) systems of the project cover the Detail Engineering Design, Procurement, Prefabrication, Construction/Installation

Persnal Accomplishements/Contributions on the Project Review & approve Schnieders Deliverables

overall project estimating and basis of design and control philosophy definition Inter-discipline coordination and technical direction, client interface, project management and inter discipline interface

Preparation and checking of design specifications, datasheets and drawings Develop fibre optic cable routing Architecture for the entire plant Supervise and review all the deliverables from packages equipment Review all I&C scope of the project

Review and approved all I&C deliverables

Generate Request for Quoation (RFQ)

DELTAAFRIK ENGINEERING COMPANY (WORLEYPARSONS GROUP) Lagos, Nigeria. (June. 2007 – September 2011)

Job Titles: Snr. Instrument & Control Engineer

Responsibilities

Instrument and control philosophy design, inter-discipline coordination and technical direction, client, project management and inter discipline interface and preparation and checking of design specifications, datasheets and drawings. Specific technical experience includes design of a hydraulic wellhead control panel, Sea line. PCS hardware selection and specification checking and preparation / checking of datasheets for all field instrumentation and actuated valves for all projects listed below.

Project: OML99 [IKIKE FIELD DEVELOPMENT PROJECT

Project summary: This project involves design of IKIKE facilities wellheads platforms for installation in the AMENAM/KPONO

Position: SNR INSTRUMENT, CONTROL &AUTOMATION ENGINEER Client: Total Nigeria Limited

Responsibilities

Snr Instrumentation & Control Engineer: Responsible for the Instrument, Control & Automation (IC&A) systems of the project cover the FEED for the Project Persnal Accomplishements/Contributions on the Project Design the Process Control System, Safety intrumented System, Fire & Gas System

Develop the System Architecture for the entire plant Review all the deliverables from packages equipment Review all I&C scope of the project

Design Cause & Effect for the entire Plant

Participate in SPOT and SIL review

Design multiphase flow meters for well testing and metering Design of a hydraulic wellhead control panel

Design HIPPS system for project

2. Project: OML99 [AMENAM/KPONO] OILY WATER TREATMENT UPGRADE Ph.1 Project summary: This project involves the front end engineering design of new oily Water Treatment for AMENAM/KPONO OML 99 Facilities. Position: SNR INSTRUMENT, CONTROL &AUTOMATION ENGINEER Client: Total Nigeria Limited

Responsibilities

Snr Instrumentation & Control Engineer: Responsible for the Instrument, Control & Automation (IC&A) systems of the project which cover the FEED for the Project Persnal Accomplishements/Contributions on the Project Design the Process Control System, Safety intrumented System, Fire & Gas System Develop the System Architecture for the entire plant Review all the deliverables from packages equipment Review all I&C scope of the project

Participate in Design & Review all I&C deliverables Design Cause & Effect for the entire Plant

Participate in SPOT/2

3. Project: AEP - ABITEYE ESCRAVOS PIPEPLINE PROJECT Client: Chevron Nigeria Limited

4. Project: Escravos Terminal Diesel Storage Project Client: Chevron Nigeria Limited

5. Project: PIGGING FACILITIES UPGRADE PROJECT PHASE 6 Client: Mobil Nigeria Limited

6 Project: Onshore Asset Gas Management Project (OAGM) Client: Chevron Nigeria Limited

7. Project: Major Integrity Projects (MIPS) EPCM-1 Client: Mobil Nigeria Limited

8. Project: Detailed Engineering Design of Olero Creek Client: Chevron Nigeria Limited

9. Poject: Oso Condensate Pipeline Replacement

Client: Mobil Nigeria Limited

MULTI-TECH OILFIELD SERVICES LTD Port Harcourt, Nigeria. Instrument Engineer(Jan. 2005 - May.2007)

PROJECTS:

1. Installation, Servicing and Maintenance of Flow/Dispensing meter (QIT)- Client: Mobil Nig Limited

2. Tank Calibration (QIT) - Client: Mobil Nigeria Limited 3. Leak Detection Test on storage Tanks (BRT)- Client: Mobil Nigeria Limited 4. Repair and recertification of HERMETIC UTI Gtex meters and associated Instruments

(YOHO offshore/FPSO) - Client: Mobil Nigeria Limited 5. Pressure Testing of Tanks, Hydro testing of lines (Saipem Port Harcourt)

GRAND COMPUTERS (NIG) LTD Port Harcourt, Nigeria. Technical Manager/System Engineer(Jan. 2004 - Dec 2004) Technical Services

Execute and manage all activities related to the implementation and commercial deployment of new business.

Prepare project, resource and timeliness for timely deployment Minor financial expenses for efficient use of resources and capital. Logistics, timely deliveries and clearing of goods. Facilitate and manage external contracts.

Sales Supports

Computer Maintenance and Repair Networking, Computer Configuration Versatile in AutoCAD & Electronic workbench software for Engineering Design and Installation

Training

SHELL PETROLEUM DEVELOPMENT COMPANY SITP/2

PorHarcourt,Nigeria.

Instrumentation/Production Operation (Training)(Jan.2003 - Dec.2003) Maintenance and repairs of Pressure Transmitter, Level Transmitter Calibration of Pressure regulator, Transmitter, Maintenance of Level Controller

-DCS control room operation, Operation of gas compressor, FPSO operation, Installation and Maintenance of Transmitter. Operation of gas turbine Installation of Pressure Gauge, Maintenance of Control Valves.

Good health and safety culture

Trouble shooting and repair of In -Line Flow meters. Versatile in AutoCAD & Electronic workbench software for Engineering Design

WARRI REFINERY & PETROCHEMICAL COMPANY (WRPC), Warri, Nigeria. Instrumentation Engineer(National Youth Service Corps (NYSC))(Jan.2002 - Dec. 2002) Installation and Maintenance of Transmitter,

DCS process control room operation.

Maintenance of Level Controller

Installation of Pressure Gauge

Calibration of pressure regulator, Transmitter,

Reference Engr. Ogunkilede Abayomi

Lead engineer- Instrumentation & Control

EXXonMobil Lagos

Phone No: 080********

E-mail: adhc5e@r.postjobfree.com

Mr. Falese Olukunle

Lead engineer- Instrumentation & Control

Deltaafrik Engineering Company

Lagos.

Phone No: 080********

E-mail: adhc5e@r.postjobfree.com

Contact this candidate