Engineer Maintenance
Resume:
ADNAN AHMED KHAN
PROJECT SUPERVISOR GPON – FTTH OSP/ODN
FIBERHOME INTERNATIONAL - KARACHI
***********@*****.***
Anwar-E-Ibrahim, Malir City Karachi.
OBJECTIVE:
Seeking a challenging job in a progressive organization with an aim to contribute positively, energetically towards the Goal and Objective of the Organization to the best of my capabilities and to develop my professional skills.
PERSONNEL AND PROFESSIONAL PROFILE
Friendly, Outgoing Personality & Enjoys working as a part of a team, while being self-motivated, Keen to learn new skills & Sets high standards for self and staff, Takes pride in providing a level of service, Works well under stress & Good sense of humor.
Enjoys problem solving and taking challenges & Able to work on own initiative.
Education
2001 – 2004 Three year Diploma of Associate Engineer Electronics.
1999 – 2000 Secondary School Certificate.
experience
Project Supervisor FIBERHOME INTERNATIONAL- KHI
APRIL 2019 - JUNE 2020
●Took direction from management as needed and reported all installation issues.
●Supervise, inspect and provide design support during the installation and implementation of CPE.
●Maintenance of FOC for Network development.
●Installation and Maintenance of ODF, and FDH.
●Tested all installations to ensure they were working correctly.
●Preparing the Daily Sheet.
●Interacted well with team members.
Field Supervisor EMS ENGINEERING SERVICES- KHI
JANUARY 2018 - MARCH 2019
●Plan and Manage survillance and security system
●Took direction from management as needed and reported all installation issues.
●Supervise, inspect and provide design support during the installation and implementation of CPE.
●Maintenance of FOC for Network development.
●Installation and Maintenance of ODF, and FDH.
●Tested all installations to ensure they were working correctly.
●Preparing the Daily Sheet.
●Interacted well with team members.
Field Supervisor SPECIAL GERMAN ELECTRO MECHNICAL(SGEM)-UAE
(Contractor to Emirates Telecomm Corporation –Etisalat)
April 2014 - November 2017
●Maintenance of FOC for Network development.
●Check the FAC works & makes reports.
●Clearance snags According to Etisalat standard.
●Installation and Maintenance of ODF, and FDH.
●Testing of fiber with the help of OTDR, Light Source & Power meter and VFL for Fault rectification.
●Attend the Breakdown of 600F, 300F, 200F, 100F, 48F Cables damages.
●Attend the Outages of 200F, 100F, 48F Cables.
●Fiber termination in different types of Uni-Rack & Mini ODF.
●Splice Single & Ribbon Fiber by Using 50-S & 50-R, 60-S & 60-R, 80-S & 80-R splicing machines.
●Preparing the Dairy Sheet.
●Supervise, inspect and provide design support during the installation and implementation of CPE.
●Buried Cable tress through cable locator.
Fiber Optic Technician TAMDIDATH AL-HADITH EST (KSA)
(Contractor of SAUDI TELECOM- STC)
December 2012 - January 2014
●Maintenance of FOC for Network development
●Installation and Maintenance of ODB, OSB and FDB
●Testing of fiber with the help of OTDR and Power meter, Light Source and VFL for Fault rectification
●After installation Cross testing of OFC by OTDR and Power meter
●Attend the MDTs of 288F, 96F, 48F & Ericson Cables
●Fiber termination in different type of ODF and cabinets
●Splice and repair various types and sizes of Optical Fiber by Using 60-S, 50-S
●Preparing the Dairy Sheet
●Supervise, inspect and provide design support during the installation and implementation of CPE
●Buried Cable tress through cable locator
Assistant Engineer Medisel (Hitachi) Pakistan.
February 2012 - December 2012
●Installations, troubleshooting and maintenance of radiological equipments like MRI, X.RAYS and C-ARM x-ray systems
●Installed system software and all the optional softwares
●Detected gradient problems in mri system
●Interfaced hitachi mri system with dicom printer
●Repaired all the receiving coils of hitachi mri system
●Tuned all mri receiving coils
●Tuned transmitter coil of mri system
●Understand circuit diagrams of hitachi,Universal and Indian x-rays systems Installation of complete c-arm system and trouble shooting
●Installation of complete x-ray 500MA Hitachi system and trouble shooting
●calibration of complete MA’s of Hitachi system
●Installation of complete Medtronic 300MA system and trouble shooting
●Calibrations of complete MA’s
●Installation of Medtronic 100MA system and trouble shooting
●Complete servicing of x-rays 500ma system & C-arm system
●Installation and repaired of x-ray collimator board
●Installation of Indian Bucky with Hitachi Control
●Installed new x-ray tube in hitachi system and calibration of MA and rotor voltages
●Surveyed sites and advised customers on necessary site preparation and planning.
Optical Fiber Cable Supervisor
AL MOSANAF ELECTRO CONTRACTING COMPANY (UAE)
(Sub-Contractor of ETISALAT)
September 2010 to October 2011
●Maintenance of FOC for Network development
●Working on FTTH Network using GPON Technology
●Installation and Maintenance of ODF and Mini ODF
●Installation and Maintenance of OFC cabinets
●Fiber termination in different type of ODF and cabinets
●Patching E-side and D-side panels
●Testing of fiber with the help of several types of OTDR and Power meter and VFL and Fault rectification
●Installation and Configuration of Different ONT Panels
●After installation Cross testing of OFC by OTDR and Power meter
●Splice and repair various types and sizes of Optical Fiber by Using 60-S, 50-S
●Also Work on 100-Fibers of Ribbon to Ribbon and Ribbon to Single OFC Splicing
●Planning for Installation of the Services to the Customer’s and supporting the Technical Staff for any difficulties.
●Provide Technical Support of Triple Play Services ( Internet, Digital TV and Voice) to Customer
●Configure operating systems and install software for access to the Internet
●Provide business systems, network and Internet support to users in response to identified difficulties
●Supervise, inspect and provide design support during the installation and implementation of CPE.
●Prepared the Dairy sheet.
Trainee in the Instrument Department NATIONAL REFINERY LIMITED (Pakistan).
May 2008 To May 2010
●Completely attend the Shutdown & Turn Around and Commissions of Lube refinery and Fuel refinery.
●CALIBRATION, COMMISSIONING AND TROUBLE SHOOTING OF
Various Types Of Pneumatic and Electronic Instruments Like:
●Pressure Instruments, Flow Instruments, Level Instruments
●Switches Like Micro, Murcurite, Flow And Level
●Gauges Like Pressure and Temperature
●Temperature Elements like RTD, Thermocouple
●Control valves, on-off valves, solenoid valves
●Control valves maintenance and service
●Solenoid Valves Services
●Smart Positioners maintenance and service
●I/P converters maintenance and service
●Air Pressure Regulators Services and Maintenance
●Gauge Glass Services
●Pneumatic and Electronic Relay service
●Good Experience in the Plant Maintenance and Commissions
●Capacity to do job alone by following Safety rules & regulations
●Carried out monthly loop checking. Attend safety courses like, firefighting, work permit system, SOP.
●Safety and good housekeeping.
●Prepare Preventive, Calibration and Job orders Report.
skills
●MS Office – Intermediate Level
●Internet – Expert Level
●Operating Systems – Intermediate Level
PERSONAL INFORMATION:
Father’s Name : Nizamuddin Khan
Date of Birth : 21-Oct-1984
Marital Status : Married
Religion : Islam
Nationality : Pakistani
Language Competency : English, Urdu, Arabic, Hindi
CNIC Number : 42501-5254719-9
Driving License : UAE, SAUDIA & PAKISTANI
REFERENCE:
Will be furnished upon requirement.
Contact this candidate