SUNIL SHARMA

Mobile: 079******** ~ E-Mail: adh7o6@r.postjobfree.com ~Passport no: N1981271

Seeking for a promising position in Industrial Automation/R&D/Commissioning/Design engineering with an organization of high repute preferably in Automation industry/any Industrial sector which is more in line with my academic background and which effectively utilizes my analytical and technical skills

PROFILE SUMMARY

A dynamic professional with 4 years & 6 month of experience in:

Software Development & Commissioning Project Managements Design Engineering

Troubleshooting Technical Support Inspection & Testing

AC DRIVES (SIEMENS/SCHNEIDER/ABB), DC DRIVES (SIEMENS/ABB) COMISSIONING

SERVO DRIVES (SIEMENS) COMISSIONING

SIEMENS PLC (200/1200/1500/300) Communication & COMISSIONING

Proficient in project planning, scheduling, project coordination, monitoring for overall project.

Skilled in resource planning, in-process inspection, team building and co-ordination with internal/ external departments

Adept in executing Electrical and Instrumentation work according to the approved Drawing.

Excellent in PLC Programming in Ladder, Testing, Troubleshooting and commissioning.

Good experience in SCADA & HMI development.

Experience in Conducting AC & DC Drives commissioning and fault troubleshooting significantly.

Extensive exposure in gathering client requirements, leading the implementation of requirements, guiding the plan to reality and managing customer expectations.

Systematic approach and quick adaptability to new technologies; First-rate analytical and problem solving skills dedicated to maintain high quality standards

CORE COMPETENCIES

Software Development & Commissioning

Involved in on site and off site PLC Programming in Ladder, SCADA, HMI Designing as per requirements

Acquainted with on site commissioning of PLC, AC & DCDrive Panels.

Ensuring completion of work within the time & cost parameters and effectively utilizing the resource to maximize the output

Design Engineering:

Executing jobs in compliance to schedules/ plans, engineering designs/ drawings and technical specifications in collaboration with Design and Engineering Team

Taking initiatives for discrepancies arising and improvement required; consulting the designers and receiving the design changes from the Customer

Involved in

System Architecture Designing

BOM Preparation to Estimate the Project Cost

Project Documentation

FAT (Factory Acceptance Test)

System Drawing Preparation Using AutoCAD.

Installation, Commissioning

Inspection & Testing:

Performing internal inspection of PLC, AC & DC Drive & Control panel as per approved QAP & FAT.

Maintenance Operation:

Checking wiring to identify loose connections to prevent power fluctuations to devices, to prevent devices to operate erratically

Checking module diagnostic information & communication architecture as a measure of preventive maintenance

Identifying areas of bottlenecks/ breakdown and taking steps to rectify the same through troubleshooting & modification in the PLC Program and SCADA graphics

Attending the system during breakdown to troubleshoot & restore operation with minimum downtime

TECHNICAL SKILLS

Conversant with the following:

PLC:

oSIEMENS: S7 300, S7 1500,S7 1200,S7 200

Software: S 7 TIA PORTAL Versions 12/13/14, SIMATIC MANAGER Version 5.5sp4.0

SCADA:

oSIEMENS: WINCC Version 7.0 SP 3.0 .

HMI:

oSIEMENS: WINCC Flexible 2008 and TIA PORTAL Version 12/13/14.

AC DRIVE:

oSIEMENS(AC DRIVES): MM440, MM430, V20, G120(UPTO 250KW), G130(UPTO 450KW), S120(UPTO 400KW)

oSIEMENS(DC DRIVES): SINAMICS 6RA70, SINAMICS 6RA80(350KW)

oABB (AC ADRIVE) ACS 550, ACS800.

oABB (DC DRIVE) DCS800.

oSCHNEIDER (AC DRIVE) ALTIVAR 71, ALTIVAR 1000

SERVO DRIVE:

oS120 (SIEMENS)

oREXROTH

Energy Meter-

oSIEMENS: PAC3200,

oL& T: NOVA,CONSERVE,3P4W MFM

Communication Protocols: TCP/IP, Profibus, Modbus and OPC server.

Designing Tool: AutoCAD 2009/2010/2011/2012

Operating System: Windows 7

ORGANISATIONAL EXPERIENCE

Automation Network & Services Pvt. Ltd. As a Project Engineer Nov, 2013 - Nov, 2017

Automation Network & Services Pvt. Ltd. As a Senior Project Engineer Since ' 2018

Key Result Areas:

Selecting control schemes and identifying appropriate control system.

Handling pre-project activities like system design, project plan development, scope planning, etc.

Generating input / output list, control logic flow chart, cable schedule, etc.

Plant SLD Development.

Accountable for PLC Logic & SCADA application development.

Carrying out the onsite commissioning of the system.

Responsible for system architecture designing.

Developing the BOM for estimating the project cost.

Supervising the fabrication process and carrying out inspection of system.

Conducting the FAT (Factory Acceptance Test) & QAP (Quality Assurance Plan) preparation activities.

Switch Gear Selection (ACB/MCCB/MPCB/MCB).

Panel Architecture development along with GA & IGA.

Major Projects Handled:

Turnkey project (Electrical) of Hot Rolling Mill

Organization : Fabulous Commercial Pvt. Ltd, Darjeeling, W.B

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of MCC and PCC panels.

Communication establishes between Siemens S7300 PLC and ABB DCS 800 drives.

Configure OPC server for Communication between WINCC SCADA and ABB PLC for Energy

consumption data from KWH meter via MODBUS . PLC logic develops for FLYING Shear, Length counting of TMT bar and Speed synchronization of mill. Siemens KTP 700 HMI and WINCC SCADA develop for Visualization and report generation.

Team size : 4

Hot Rolling Mill

Organization : Mongia Steel Ltd, Giridi, Jharkhand.

Highlight : WINCC SCADA development of complete double line along with archived trends & report generation.

Team size : 1

Hot Rolling Section.

Organization : IISCO SAIL,BURNPUR CCM-1/2/3(BEAM BLANK BLOOM CASTER).

Highlight : COMPLETE S120 drive commissioning in four strands as per different application along with one crane application in CCM-3

Modification in CCM-1 & 2 as per requirement of client in each 6 strands .

Team size : 2

Hot Rolling Section.

Organization : HOT STRIP MILL in ROURKELA STEEL PLANT (RSP)

Highlight : COMPLETE V20 drive commissioning 6 no. for oil pump along with s7-300 & s7-1200 communication, interfacing, logic development.

WINCC SCADA development for complete system along with HMI DEVELOPMENT using TIA PORTAL V13.

Team size : 2

Turnkey project (Electrical) of PAPER PLANT(WRITING & PRINTING PAPER).

Organization : Sapphire paper mill Pvt.Ltd., BidhanNagar, Kishanganj.

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of MCC and PCC panels.

Communication establishes between Siemens S7300 PLC and SINAMICS G120 drives.

Configure OPC server for Communication between WINCC SCADA .

Siemens KTP 700 HMI 3NO.and WINCC SCADA develop for Visualization and report generation.

Team size : 2

Turnkey project (Electrical) of PAPER PLANT (KRAFT PAPER).

Organization : S.R INTERNATION PVT.LTD., HALISAHAR,WB.

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of MCC and PCC panels.

Communication establishes between Siemens S7300 PLC and SINAMICS G120 drives.

Siemens KTP 700 HMI 3 NO. and WINCC SCADA develop for Visualization and report generation.

Team size : 2

PAPER CUTTING MACHINE (A4 TO A0 SIZE).

Organization : HAKKANI PULP & PAPER MILLS LTD., PAHARTULI, BANGLADESH

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of DRIVE,PLC& MCC panels.

Communication establishes between Siemens S7300 PLC and SINAMICS G120 drives 4NOS.

Proximity Switches & Photo Sensors were used as instruments.

Siemens KTP 1000 HMI 1 NO. and WINCC SCADA develop for Visualization and report generation,along with REXROTH HMI development using V-I COMPOSER for Visualization.

Team size : 5

GLOBE RWINDER MACHINE (MAX. SPEED 800 MPM).

Organization : AFIL PAPER MILLS LTD.., BHATER CHOR, BANGLADESH

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of DRIVE,PLC& MCC panels.

Communication establishes between Siemens S71200 PLC and SINAMICS G120 drives 3NOS.

Proximity Switches, Load Sensors I-P converter along with complete pneumatic & hydraulic- were used as Instruments.

Siemens KTP 1000 HMI 1 NO. develop for Visualization and trouble shooting.

Team size : 2

VIKRANT SPECIAL MACHINE (JAYPEE GROUP OF INDUSTRIES).

Organization : JAYPEE GROUP OF INDUSTRIES, GUNA(MP)

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of S120 DRIVE,PLC & CONTROL panels.

Communication establishes between Siemens S73000 PLC 3NOS.,PLC TO PLC COMMUNICATION,SINAMICS S120 drives 4NOS,G120 DRIVE 1 NOS., 6 NOS PROFIBUS ENCODER & 1 KTP400 HMI

Limit Switches & Profibus encoders were used as Instruments.

Siemens KTP 400 HMI 1 NO. develop for Visualization and operation of machine.

Team size : 1

TISSUE PAPER MILL.

Organization : HAKKANI PULP & PAPER MILLS LTD., CHITTAGONG (BANGLADESH)

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of G120 DRIVE,PLC,HMI & CONTROL panels.

Siemens S7300PLC COMMUNICATION WITH SIEMENS G120 DRIVE 4NOS VIA PROFIBUS & PLC TO HMI (KTP700) COMMUNICATION VIA MPI .

Maximum machine speed of 670 MPM, PRODUCTION OF FACILA TISSUE, TOILET TISSUE,NAPKIN,PERFUME TISSUE.

COMPLETE TESTING,TRAIL,COMISSIONING DONE .

Team size : 2

REWINDER COMISSIONING.

Organization : BASHUNDHARA PAPER MILLS LTD.(MUTI PAPER), DHAKA (BANGLADESH)

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of DCS800 DRIVE,PLC,HMI & CONTROL panels.

Siemens S7300PLC COMMUNICATION WITH DCS800 DRIVE 10NOS VIA PROFIBUS & PLC TO HMI (KTP700) COMMUNICATION VIA PROFINET .

Maximum machine speed of 1800MPM

COMPLETE TESTING,TRAIL,COMISSIONING DONE .

Team size : 3

CUT TO LENGTH.

Organization : RKTE METALS PVT.LTD.(LILUAH) HOWRAH.

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of G120 DRIVE,PLC,HMI & CONTROL panels.

Siemens S71200PLC COMMUNICATION WITH G120 DRIVE 2NOS VIA PROFINET & PLC TO HMI (KTP700) COMMUNICATION VIA PROFINET .

Maximum machine speed of 8.7MPM along with loop control & auto cut to length through incremental encoder feedback .

COMPLETE TESTING,TRAIL,COMISSIONING DONE .

Team size : 2

CUT TO LENGTH.

Organization : ASHOKA SKY PVT.LTD.(TATA)

Highlight : Supervision of Panel Erection and Cable lying. Commissioning of G120 DRIVE,PLC,HMI & CONTROL panels.

Siemens S71200PLC COMMUNICATION WITH G120 DRIVE 2NOS VIA PROFINET & PLC TO HMI (KTP700) COMMUNICATION VIA PROFINET .

Maximum machine speed of 8.7MPM, auto cut to length through incremental encoder feedback .

COMPLETE TESTING,TRAIL,COMISSIONING DONE .

Team size : 2

SAND PLANT.

Organization : LARSENT & TOUBRO LTD.

Highlight : Currently working on software part of 40,60&100 TPH sand plant of L&T kansbahal

Siemens S7 300 PLC TO PLC COMMUNICATION ALONG WITH S7300 TO ALLEN BRADLY PLC DETA SEND RECEIVE VIA PROFINET .

KTP1200 comfort HMI is used for showing complete plant process and controlling the plant along with full animation of auto process,data transfer and receive through cloud is also incorporated .

Team size : 2

HOT ROLLING MILL.

Organization : DJIBOUTI STEEL FACTORY SARL, DJIBOUTI (EAST AFRICA) (22TPH)

Highlight :Supervision of Panel Erection and Cable lying. Commissioning of 6RA80 & G120 DRIVE,PLC,HMI & CONTROL panels.

Siemens S7300 PLC COMMUNICATION WITH 5NOS.G120 DRIVE & 19NOS.6RA80 VIA PROFIBUS & PLC TO SIMATIC WINCC (V7.3) COMMUNICATION VIA PROFINET .

Maximum machine speed of 15MPS, TMT cutting length calculation through incremental encoder feedback connected in PR2 of TMT section .

COMPLETE TESTING,TRAIL,COMISSIONING IN PROCESS .

Team size : 2

EDUCATION

2013 B. Tech. (Electrical Engineering) from WBUT, West Bengal.

2008 12th from WBCHSE, West Bengal

2006 10th from ICSE, West Bengal

PERSONAL DETAILS

Date of Birth: 2nd March, 1990

Address: SIBAJI PARK SIBPUR ROAD MUCHIPARA DURGAPUR-12, P.O-BIDHANNAGAR, P.S-KANKSA, PIN-713212,WEST BENGAL

Languages Known: English, Hindi, Bhojpuri, and Bengali.

Contact this candidate