Electrical Engineer
Resume:
AV ELECTRICAL DESIGNER Dubai, UAE
Innovation Technical & Consultancy
Jan 2015 - present
Provide Drawing Layouts for AV, IT, Voice/Data and Security and power points in a specified Space plan.
Recommends lighting fixtures for certain areas such as board room, office space area with reference to the interior design specification requirements.
Design interface on various disciplines for proof checking and coordination on a particular design scope of works.
Ensure that the design is carried out in regards to relevant Standards and Quality Procedures.
ELECTRICAL ENGINEER Dubai, UAE
AVTELCO Electronics & Interiors LLC.
Nov 2010 - Dec 2014
Assisting the Sales and Design Teams for Tenders, Electrical Specifications and Quotations including design of Electrical installations.
Getting approved by the relevant UAE Authority for being able to sign on Electrical specifications for AVTELCO projects all related to Electrical Installations, Lights and Lighting controls.
Internal and External marketing of AVTELCO Green Lighting, Building Management Control and Audio-Visual Solutions and Products with accompanying services in UAE and other assigned territories out of UAE. Maintain open communication with the Project Manager and Product Engineer in order to satisfy the clients fully.
ELECTRICAL ENGINEER Dubai, UAE
Al Khatib Cracknell Consulting Company
Sep 2008 - Oct 2010
Provide Drawing Layouts, Single Line and Interconnection Diagrams for electrical installations in street lightings on infrastructures and Industrial buildings as per site conditions and in compliance with the local and international regulations (BS, IEC and DEWA).
Provide calculations in determining the proper sizing of cables, fault current, overcurrent protections and other electrical components for electrical systems.
Site supervision on installations of cables, electrical equipment (e.g. panelboards), lightings, and other wiring devices in compliance with the local and international regulations (BS, IEC and DEWA).
Check, approve, evaluate and revise if needed the wiring diagram submitted by the contractor to suit client requirements in compliance with the local and international regulations (BS, IEC and DEWA).
Provide BOQ (Bill of Quantities) for Electrical fit outs on electrical installations such as Cable trays, cabling and panelboards required for specific projects.
Respond to Site Queries and Site Clarifications regarding electrical designs and electrical installations.
W O R K E X P E R I E N C E:
ARNULFO GLORIA
ELECTRICAL DESIGN ENGINEER
CONTACTS:
PHONE NUMBER:
EMAIL ADDRESS:
adgzte@r.postjobfree.com
A B O U T M E:
- Having an extensive
experience in design and
site supervision in the field of
Electrical works.
- Expert in cadd tools
specific in Autocadd latest
version and MS Office
- Long term experience in
documentation control as
per the standard company
regulations/requirements.
Provide calculations in determining the proper sizing of cables, fault current, over-current protections and other electrical components for electrical systems.
Site supervision on installations of cables, electrical equipment (e.g. panelboards), lightings, and other wiring devices in compliance with the local and international regulations (BS, IEC and DEWA).
Check, approve, evaluate and revise if needed the wiring diagram submitted by the contractor to suit client requirements in compliance with the local and international regulations (BS, IEC and DEWA).
Provide BOQ (Bill of Quantities) for Electrical fit outs on electrical installations such as Cable trays, cabling and panelboards required for specific projects.
ELV DESIGN ENGINEER Dubai, UAE
PMK International
April 2006 - Sep 2008
Provide Drawing Layouts for Voice/Data and power points for a specified
Space plan.
Recommends lighting fixtures for certain areas such as board room, office space area with reference to the interior design specification requirements.
Design interface on various disciplines for proof checking and coordination on a particular design scope of works.
Ensure that the design is carried out in regards to relevant Standards and Quality Procedures.
ELECTRICAL SALES ENGINEER Jebel Ali, UAE
FARRAJ Trading & Manufacturing Co.
Nov 2004 - Mar 2006
Provide quotations to all incoming inquiries from specified clients.
Responds to all Clients’ queries and correspondence concerning to particular products of Cutler-Hammer.
Provide technical supports and advices to all Client’s especially on the proper selections of ampere ratings of circuit breakers, air circuit breakers and LV Main Distribution Board with its corresponding sizes enable to meet the specific requirements of the clients. ELECTRICAL DESIGN ENGINEER Riyadh, KSA
ABV Rock Group KB
May 1998 - Aug 2004
Provide Drawing Layouts, Single Line and Interconnection Diagrams for electrical installations in Residential-accommodation, Water and Sewage Treatment Plant, heliports, street lightings and Industrial buildings specific on Off-Cavern Facilities as per site conditions and requirements.
Write electrical specifications for electrical designs and equipment based on applicable standards codes (SAUDI ARAMCO, IEC and NEC).
Data Sheets productions for Panelboards, MV & LV Switchgears, Motor Control Centers, MV & LV Transformers based on design requirements and Single Line Diagram.
Use computers to test and control electrical equipment, and perform specialized functions (e.g. designing electrical installations, determining the fault level of current, cable sizing, voltage drop and illuminations).
Communicates and interacts with field engineering department regarding inquiries and problems related to electrical design matters.
Design interface on various disciplines for proof checking and coordination on a particular design scope of works.
Ensure that the design is carried out in regards to relevant Standards and Quality Procedures.
Prepare ABV response to Client’s comments to the submitted Electrical packages.
Respond to Site Queries and Site Clarifications regarding electrical design scope of works.
ELECTRICAL DESIGN ENGINEER Philippines
Enviroasia Corporation
Nov 1993 - April 1998
Ocular inspection of site.
Electrical equipment, electrical cables, cable trays and accessories material take-off list.
Cable tray, Earthing, Lighting and Small Power Arrangement Layout.
Communicates and interacts with clients regarding inquiries and problems related to electrical and instrumentation.
Provide/prepare a mimic process flow diagram for data logging system of Sewage Treatment Plant based on approved P&ID’s using FVH software procured from Electrical & Instrumentation counterpart in Belgium.
Position: Commissioning Engineer (Field Engineer)
Check and ensure that all instruments and controllers, electrical equipment, pre-wired panel board are installed/mounted as specified on its instruction manual and approved design layouts as required by the national, and international standard (NEC, IEC and PEC).
Calibration and configuration of instruments and controllers to suit all requirements necessary for the process.
Testing and commissioning of instruments/controllers as per process requirements and as per PID diagrams.
Repair and calibrate instruments/controllers that could be serviceable on the field.
Check and evaluate that all electrical/instrumentation diagrams, termination list and other diagrams concerning electrical and instrumentation correspond to the necessary interlocks, safety and automation as required as per PID’s diagrams, national and international standards (PEC, IEC and NEC).
Modify, revise and rewire instrumentation and control strategies as needed to meet the process requirements.
Installation of FVH module communication card to the computer system to interface with the process data logging system.
Maintains communications with counterpart in Belgium particular on technical matters, or data and information related to electrical and instrumentation.
Work supervision for installation of electrical equipment, instruments and electrical layouts of cable tray/ladder, and cables based on applicable national and international standard code (IEC, NEC and PEC). Position: CAD ENGINEER
Creates and executes 2-Dimensional drawings of P & ID, Mechanical, Civil and Electrical using AutoCAD Rel.12.
Interprets the basics of piping drawings of the plant using P & ID, Civil and Mechanical drawings and vendor or data reference.
Updates the process flow, P & ID and other drawings based on instructions and corrected draft drawings using AutoCAD as a drafting tools.
Sets-up and configures the plotters, digitizers and video display of AutoCAD software.
Customizes digitizer windows-based applications.
Responsible in doing the system of filing and organizing all AutoCAD drawings (both in digital and hard files) and vendor data for all projects.
Executes and updates isometric drawings using AutoCAD rel. 12.
Computer software system trouble shooting.
Responsible for training colleagues of AutoCAD software and other PC-Windows-based application softwares.
Other special duties that may be required or needed from time to time.
PRODUCTION SUPERVISOR
Philippines
FilKor International Food Corp.
Feb 1993 - Nov 1993
Supervisions and monitoring of works, specific on maintenance check of all electro-mechanical equipment used - that is related to production process.
Perform calibration and testing of instruments as per process production requirements.
Ensures standard procedures implemented.
Provide analysis report to the management concerning the process and proposals related to the production process and maintenance procedures.
University of The East, Caloocan Campus, Philippines Bachelor of Science in Electrical Engineering 1993
Electrical Design
Software Tools for Design Works & Cadd Support Tools E D U C A T I O N:
S K I L L S:
Contact this candidate