Email Address:maturechidi@yahoo.com********

PASCAL CHIDI EMMANUEL

QA/QC Electrical Engineer

Home Address: Building No 26 – Zone 47 Street 897 Al Thumama Qatar Doha E-mail: adgw7b@r.postjobfree.com

Mobile: +974********

Marital Status: Married

VISION

Electrical Engineer/QAQC Engineer with over thirteen years of experience in handling end to end electrical and instrumentation activities in oil & gas field, Metro, Ventilation System, Electrical Instrumentation, Maintenance and infrastructure with extensive experience in Testing & Commissioning both in Malta Island and Middle East. Proven track record in handling the entire aspect of the project, construction management, quality Standard & Ensuring total safety practice on site

Familiar with relevant standards, Qatar construction standard (QCS), and Kahramaa requirements Knowledgeable in international organization standard (ISO 9001, 14001 & 45001). To work in the dynamic team oriented, competitive and cooperative environment in a reputable organization, where there is maximum chance of learning and grow as a proficient, innovative and committed person.

EDUCATIONAL BACKGROUND / QUALIFICATIONS:

● University Of Port-Harcourt Nigeria(1997-2002)

● BACHELOR of SCIENCE: Electrical Engineering (Second Class Upper) PROFESSIONAL QUALIFICATIONS

● QUALITY MANAGEMENT SYSTEM(QMS)LEADS AUDITOR ISO9001:2008

● IRCA CERTIFIED (QMS) ISO-9001:2015 LEAD AUDITOR Module 2: (A17990)

● IRCA CERTIFIED (QMS) ISO-9001:2015 LEAD AUDITOR Module 1: (A17989)

● DIPLOMA IN ALLISON SAFETY & HEALTH ENVIRONMENTAL

● OSHA SAFETY & HEALTH MANAGEMENT(OSHA)

● OSHA OIL & GAS SAFETY

● Project Management Professional (PMP)

● New Template ISO International Standards

● Accident Prevention Safety

● ISO 9001, ISO 14001 & ISO 45001 International Standard

● Testing & Commissioning Professional [IET]

WORK EXPERIENCE

COMPANY: SENER INGENIERIA SISTEMAS/ ALSTOM CO.W. L.L PROJECTS: Qatar Rail, Lusail Light Railway Transit System [LRT] UG, AG Station, and Depot. POSITION: QA Integrated Electrical Engineer. Independent Checker Engineer (ICE) Consultant: Sept 2018 till date

Email Address:maturechidi@yahoo.com55073728

Responsibilities:

Responsible for Schneider PLC-HMI System Programming and testing for Traction and Power substation (750VDC, 33KV and 415V).

Performing SCADA interface testing with Operation Control Center (OCC).

Responsible for power supply and traction supply construction and commissioning activities

(DC switchgears, Transformers, Rectifiers, Inverters, Traction power supply TCB).

Responsible for Co-ordination of Testing and commissioning of 33KV, MV and LV switchgear, Rail / Metro energy system installations of 750 VDC third rail project

Coordination with the contractor to ensure all installation of electrical equipment such as MV.LV, ELV etc… are installed as per project specification.

Report any works carried out by contractor found to not be in accordance with approved drawing and specifications and report to stakeholders for appropriate action.

Coordination with the DB Contractors such as for Drawings, Reports, Material Submissions, Calculations, Test & Commissioning Procedures, Implementation Plan.

Ensured all Electrical systems such as LV and MV equipment’s, motors, transformers, switchgears, PDBs, CTs, Relays, UPS, battery bank, lighting fixtures, receptacles and small power panels

Conducting all necessary pre-inspection /inspection tests and verifications to ensure System’s readiness for QCDD inspection.

Familiar in Operation, Repair and Maintenance of HV Under Ground Cables and Hi pot test

Ensuring of APS safety line Validation and measurement of voltage curve/ Remote SC Reviewing of BOQ with drawings and specification as per project standard.

Creative technically grounded approach to troubleshooting and problem solving.

Coordinating to resolve interface problems during construction activities.

Conducting inspection on Instrumentation and Control systems such as DCS, ESD, PLCs and Cabinet integration instruments and transmitters like pressure, Diff pressure, level, flow, RTD

Review of Project Requirements (power and traction), As-built drawings, Single line diagram, Equipment Layout & Technical Co- ordination, voltage drop analysis, Earthing / Grounding Calculations, Stray current measurement. Ensuring testing of (MV measurement 750v between APS & TCDs.

Reviews Sub-contractor’s quality assurance, inspection and test plans, installation, testing, pre- commissioning and commissioning procedures for electrical equipment and cable work and provide for transmittal approval.

Familiar with Switchgear (Make: ABB (ZS2) (RED615 & REF615 relay), DC switchgear, Dry transformers, Aesthetic power system equipment.LV panels.),

Reviewing and Validating of test report and as build as per project quality plan.

Conducting inspection of OCS&APS with the contractor to ensure all installation and Testing are carried out as per project specification and procedures

Conducting Testing of Tram movement to ensure all APS systems are communicating properly.

Ensuring incoming material are received as per approved material submittal

Exceptional familiarity with automation and PLC systems

Ensuring installation & maintenance of Transformer, MV/LV Switch Board, A/C, UPS,DC UPS COMPANY: Zitron Contracting Company / Mitsubishi (MHI) PROJECTS: Qatar Rail (ALL RED LINES, GOLD LINES, BLUES & GREEN LINES) POSITION: MEP QA Site Engineer. May 2016 to Aug 2018 Responsibility:

In-Charge for overseeing all MEP and Electrical work and Ensure the electrical / mechanical Work are carried out as per approved shop drawing and within the time frame and progress

Ensuring that the installation, inspection and testing of all electrical/mechanical equipment, work meets the specification and the consultant requirements, as per QCS & PS Email Address:maturechidi@yahoo.com55073728

Responsible for incoming materials inspection such as isolation Damper, DR Damper, UPE Damper, Sliding Damper, Axial Fan, VSD Panel, DP, Control Panel Ahu, Jet Fan, etc. with respect to specification, Data sheet, material Approval and quality plan

Ensure that all inspection reports are accurate and that all attached documents are current status

Ensure safety and welfare of everyone on the site as QA/QC site Manager.

Attend client, consultant, contractors and regular progress meetings at site.

Ensure all installation and termination of Damper’s, Ahu.Axial Fan and Jet Fan are as per project specification

Responsible for resolving quality related issues at site, as per the approved procedures.

Ensure proper installations are done as per the approved design drawings and project specifications.

Ensure quality assurance on every activity on site. And responsible for pre-inspection of material delivery, ensure the quality of received materials is as per approved material submittal,

Participated in the QA/QC meeting

Preparation of testing & commission method statement in coordination with vendors, and project engineers

Inspecting installation of HV, LV cable, cat 6 SMDQ & cable testing such as (Continuity test & Insulation Resistance test.

Supervision of ahu ducts, Nozzle ducts & chilled water pipes, valves with complete insulation as per specification

Inspecting the NDT testing for all the welded joints of carbon steel pipes of ahu pipe are asper standard

Witness the Hydro testing, chemical cleaning, flushing and passivation carried out by the contractor for the Chilled water

Ensure smoke test are conducted on ahu duct as per project specification

Inspecting of HVAC chilled water system, Plumbing System as per international code and standards. COMPANY: PORR QATAR CONSTRUCTION CO.W.L. L, UNDER MITSUBISHI CO. PROJECT: Qatar Railways Company Main Office Phase 1: West bay POSITION: QA/QC Electrical Engineer

Nov, 2013 – Mar, 2015

Responsibility:

● Coordinate all inspection; monitor the required tests and record inspections according to the contract specifications.

● Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawing and specifications

● Preparation and Daily monitoring of the construction activities,

● Verify all test equipment that requires of the purpose, to ensure that is properly calibrated and maintained as required

● Ensure that there is no delay in any inspection activities and that all Inspections are carried out in strict compliance with the agreed TA schedule,

● Ensure that, enough NDT personnel are available at the site of requirement without any delay, Ensure that all correct procedures are available at Work Sites, Ensure that all Welder Certifications and Qualifications are available at site for inspection of competent authorities at any point of time

● Monitor Company Quality System activities such as Site Quality activities based on Companies Management system and Project requirements

● Identify and manage risks that could impact achieving quality objectives.

● Preparing the site inspection reports and liaising with the client to inspect the works on daily basis and maintaining quality submittals logs.

● Ensure that the Project meets international standards Email Address:maturechidi@yahoo.com55073728

● Maintaining records for daily activities on site including progress photos and ensure they are available for inspection as required.

● Assures incoming materials are received and verified asper quality and approved material submittals.

● Coordinate with my QA/QC manager regarding work performance and hold authority to stop work in any area where discrepancies remain uncorrected and/ or council the stop order upon satisfactory correction noted deficiencies.

● Check and monitor the project daily activities, site manpower resources, plant and equipment on the site as required.

● Verify contractor quality requirements are specified to vendors and contractor documentation

● Review submitted shop drawings against contract drawings and specifications, local codes and statutory requirements and international best practice. COMPANY: QACC QATARI ARABIAN CONSTRUCTION CO.W.L.L PROJECTS: Workers hospital & health center- Ras Laffan- Qatar Petroleum Project.

POSITION: QA/QC Electrical Engineer Jun, 2012 – Aug, 2013, Responsibility:

● Perform witness & surveillance inspection and manage subcontractor’s quality control activities.

● Undertake installation, inspection of underground duct, Conduit, cable trucking, Cable pulling, Cable gladding & termination.

● Responsible for the over-all implementation of Quality control related electrical works accordance with project specification and Engineering standard.

● Making sure the installation of panels such as LV, MV, ELV, and HV equipment as per the specification

● Provide sufficient feedback to QA/QC manage on the day to day quality issues.

● Carrying out inspection on all plant electrical equipment & substation

● Taking care of QA/QC documents of the entire Project including calibration, test result inspection request non- compliance report and site instruction/ observation.

● Verity all required inspection report and test records are systematically generated and compiled according to the approved QC procedures.

● Making sure electricians wear all necessary protective gear. Carrying out inspection and checking all the quality-related procedures in the site.

● Take part in calculation of space factors, cable layering, voltage drop, earth fault loop impedance and short circuit current / temperature.

● Writing up and submitting daily activity reports to the site Construction Manager.

● Co-coordinating the electrical works schedule and responsible for implementing cost control plans on power plant project.

● Perform tasks of testing inductors and capacitors to ensure its compliance with standard engineering procedures.

● Responsible for recommending technical solutions for highly complex projects.

● Perform material receiving inspection and verification from vendors and subcontractors. COMPANY: ALJABAL ELECTRICAL CONTRACTORS DOHA, QATAR POSITION: QA/QC Engineer Electrical

Project: Hamad International Airport Jul, 2010 – Jun, 2012 Responsibilities:

Email Address:maturechidi@yahoo.com55073728

● Coordinating and testing of materials such as ahu duct, Cable drums, cable tray are asper the standard and thickness

● Work in conjunction with engineers to solve project design problems, performing basic design calculations as required.

● Prepare ITP and formulate inspection checklist, prepare Material Submittals, review squad check Work Method Statements, maintain PQP, implement Project Specifications and QCS.

● Maintain coordination with Clients, Construction team and Subcontractors and resolve technical issues at site.

● Maintain and update all inspection request (IR) and material Inspection Request (MIR) log.

● Issue site observation and escalate quality issues to QC Manager, monitor the corrective action and preventive action and coordinate for timely disposal of non-conformity reports.

Review ITP’s, Work Method Statements and Project Specifications and apply to daily site inspection activities to ensure works are meeting the target quality and standards. Oversee and coordinate all mechanical sub contractors in the site.

Supervise installations of HVAC Systems (Ducting, AHU, FCU, Dampers, Chilled Water Pipes, Plumbing/Drainage and Irrigation Systems (Domestic water supply cold/hot water, water heater, Sanitary Fixtures/ Pumps Installation, Drainage pipe installation both internal and external considering the inver level (IL) for a proper slop levl, Trench Drain, Gully Trap, floor drain, and Rain water drainage pipes installaions Sprinkler Systems (Sprinkler up right and pendents, Pre-Action, Deluge, FM 200 Foam Systems),

COMPANY: HASSYAN POWER PLANT TECHNOLOGY, DUBAI.

PROJECT: POWER PLANT Desalination station P-Phase 2 POSITION: QA MEP Engineer Aug, 2007 – May, 2009

Responsibilities:

● Monitoring and ensuring that the relevant Method Statements, Inspection Test Plans and Procedures are in line with Project Quality Plan and being followed through-out the Project Life Cycle.

● Extensively supervision of contractor's activities.

● Responsible for monitoring sub-con safety performance on site & closing out any safety

● Issues Provide support in reviewing project QC documentation produced by Contractors & Vendors such as Inspection and Test Plans (ITPs), Method Statement, Work procedures, etc

● Lead and manage project team to complete the company’s project within the target.

● Coordination with sub-contractors on mobilization, progress, site logistics and quality inspection.

● Preparing of monthly progress report & submission to QS claim purposes. Maintain material order / delivery / usage records. Prepare materials take off and estimates, reports and as- built plan.

● To inspect the elastomeric rubber insulation & aluminium cladding installation for the valves, pipes and fitting in all the valve chamber.

COMPANY: Hallmark Global Petroleum Limited Port-Harcourt POSITION: Electrical Maintenance Engineer Feb, 2003– June, 2007 Responsibilities:

● Inspection of structural fabrications and welding/Codes & Standards knowledge of AWS, API and ASME

● Carries out installation, maintenance, trouble shooting and repair of a wide range of high and low voltage equipment, switchgears, control panels, UPS systems, variable speed drives, generators, motors, transformers, protection relays, lighting systems and laboratory equipment, Email Address:maturechidi@yahoo.com55073728

● Perform responsibilities of preparing and designing circuit diagrams for multiple projects

● Handle responsibilities of coding to install machines in the industry

● Responsible for installation, maintenance, repair and testing of a wide range of electrical installations and equipment

● Perform tasks of testing inductors and capacitors to ensure its compliance with standard engineering procedures Responsible for recommending technical

● Maintaining all electrical pumps and electrical equipment’s such as panels & motor

● Issue site observation and escalate quality issues to QC Manager, monitor the corrective action and preventive action and coordinate for timely disposal of non-conformity reports.

● Apply to daily site inspection activities to ensure works are meeting the target quality and standards.

● Conducting operational & maintenance procedure with the technician.

● Carries out routine maintenance and testing activities. Completes fault-finding and repair of electrical systems and equipment in offshore.

● Modifies, repairs or replaces systems and equipment Installs new systems and equipment as required

● Execute external/internal inspection of onshore steel structures pressurized equipment to assess the structural strength and the state of repair & maintenance. SKILLS

● Proficient in Microsoft office.

● Auto-cad

● Microsoft Excel Project

● Sound ability to develop strategies to achieve organizational goals.

● Strong decision-making skills and the ability to prioritize and plan effectively.

● Mezzoteam

Engineering Skills:

● Knowledge of relevant IEC standards and local engineering standards.

● Comprehensive skill to analyze and interpret data and situation accurately in order to write technical reports and provide alternatives and recommendations to management.

● Review of technical drawings in accordance with local standards.

● Knowledge of Single Line Diagrams, Electrical Drawings, Planning, Erection and Commissioning.

● Estimation of electrical material according to the client standards and engaging material to construction site.

● Experience in Stimulation services and ability to plan, design and execute jobs to successful completion.

Project Management Skills:

● Highly initiative, fast learner, resourceful and energetic. A team player with ability to work independently and exercise independent judgment. Has a high regard for quality and learning with the willingness to share knowledge to co-employees?

● Expertise in handling activities pertaining to Project management i.e. infrastructural and utility projects. Planning, Installation of High voltage substation projects, Transmission and distribution projects.

● Communication skill ability to network with the Project Managers/Consultants/Clients with ease.

● Reporting to Project manager about lead Electrical activities And Electrical installation of project scope from starting up to final handover of the project.

Contact this candidate