Vesna Lukic, Electrical Engineer, Phone: 403-***-****, email: adgsbv@r.postjobfree.com

*/*

Professional Summary

Highly skilled, self-motivated and solution-oriented electrical engineer brings over 15 years of experience in electrical, automation and controls work in industry.

Thrives when facing new challenge. Demonstrate capacity to collaborate with multidisciplinary fields. Committed to the highest standards of quality and safety engineering with the sound judgement, integrity and troubleshooting abilities to manage arising emergency situations and system issues. Self-starter who continually searches for new process improvements and technical solutions to elevate engineering quality. Employs an engaging and communication style, complemented by the ability to work collaboratively with colleagues and clients. Equinox Engineering, Calgary June 2008 – June 2020 Electrical Engineer

Coordinate all activities within the electrical engineering team for the project.

Carry out detailed design, sizing, calculations, verify and check the design by others.

Ensure coordination with other disciplines is effective for each project.

Provide electrical input into the detailed Scope of Work (SOW), Design Basis Memorandum (DBM), Front End Engineering Design (FEED) and Project Execution Plan (PEP).

Perform engineering support for procurement activities including MRQ/MRP development, technical bid evaluation and vendor drawing approvals to order equipment.

Perform engineering development of Construction Work Package (CWP), construction specifications, Issued for Construction (IFC) drawings and material lists.

Develop of electrical material takeoffs (MTOs), equipment list, load list, and man-hours estimates.

Size electrical equipment (SWGR, MCCs, MCC buildings, generators, transformers, motors, UPS, contactor panels, control panels (RTU, PLC, SCADA)).

Prepare and stamp power system drawings for 15kV, 4160V, 600V, 480V (LV), 208/120V and 24VDC such as: switchgears (SWGR), single line drawings (SLD), MCC layouts, cable schedule, cable sizing, and grounding.

Prepare and stamp different industrial control systems: PLCs, SCADA (32, 334, and 357) and RTU

(FloBoss): programming, PLC/DCS cabinet layouts, control schematics, and wiring schematic. Developing I/O list for the project.

Perform fugitive emission studies to develop hazardous location classification drawings per recommendations from API 505, CEC.

Create drawings such as electrical plot plan, building electrical layouts, lighting layouts, and cable tray routing.

Design control systems for the pipelines with alternative source power in remote areas: TEG, EFOY, hybrid and solar systems.

Heat trace and freeze protection system design and calculation using TraceCalc and CompuTrace software. Develop design for installation of the heat trace cables, junction boxes, RTDs, contactor panels, controllers, transformers.

Design of the contactor panels for the 120/208VAC loads in gas plants powering motors, fans, heaters, exterior and interior lights, and other electrical loads.

Demonstrate communication and collaboration talents to effectively mentor junior electrical engineers.

Ensure QA/QC procedures are followed related to the electrical design. Vesna Lukic, Electrical Engineer, Phone: 403-***-****, email: adgsbv@r.postjobfree.com 2/4

Strong knowledge of API, CSA, IEEE codes and standards

Guide the drafting team in developing electrical drawings and 3D model.

Provide engineering support during construction, start-up and commissioning. Automation Specialist

Completed automation and control cycle for multi-million dollar projects across PLC, HMI programming, design, configuration and integration.

Developed control system architecture and drawings (Factory Talk Studio and Factory Talk Service Platform).

PLC programming for plant system, tie in local PLC controllers and HMI with the main plant controller (Allen Bradly system with RSLogix5000, Ethernet, Modbus).

HMI programming and insuring high-quality remote access (Allen Bradly Factory Talk SE View).

Developed I/O list and Shutdown Key.

Start-up of the new gas plants.

Major Projects:

AltaGas

Townsend Pipeline, British Columbia, Electrical Lead The project was to design and install of the North Loop Townsend Pipelines. This included a Sales Gas, Propane and NGL Pipeline from the Townsend Facility to the TCPL NMML meter station, Tourmaline riser and Black Swan Tie-In. Provided electrical design for the pipeline risers and over pressure protection (ESDV), included control panels RTU

(FloBoss 107) for the automated valves with TEG and EFOY systems as the power source, the area classification and grounding drawings and study.

Athabasca Oil Corporation

Leismer 16-10 Water Disposal Pipeline, Electrical Lead The project is to construct the Leismer Water Disposal Pipeline and a new disposal well. Provided design for the heat trace, using nVent controller and self-regulated heat trace cables. Provided area classification and grounding for the new disposal well, consist of the pig receiver shelter, well head building, 750bbl drain tank and propane bullets for the catadyne heaters in the shelters, and tower for the communication. The power source was solar system for 14 days of the autonomy work, 150W, 24VDC, consist of the solar panels, solar controller and battery pack. Design the control panel with Allen Bradly Control Logix controller. Encana Corporation

Valhalla Oil Battery, Alberta, Electrical Lead

The project was to build an independent Oil Battery Facility to evaluate growth opportunity in the Valhalla field. The oil battery consists of the sand separator, a line heater, a separator, HP and LP flare knock out drums, HP/LP flare stack, oil tanks, water tanks, and a gas lift compressor. Provided are classification and grounding for the battery. Develop heat trace design and calculations. Worked on electrification of the vendor buildings. Design the control panel with SCADA Pack 334.

Canadian Natural Resources

Well pad rebuilt, Pelican Lake Area, Electrical Lead The project included upgrading existing 480V MCC, adding new motors, heat trace calculation, PLC updating. Vesna Lukic, Electrical Engineer, Phone: 403-***-****, email: adgsbv@r.postjobfree.com 3/4

Pembina

Younger Extraction Plant- 15kV Switchgear Replacement & Electrical Upgrades The scope of this brown field project was to replace old 15kV switchgear with new one, to connect with existing loads that remain unchanged, such 12 500 HP motor for residue gas compressor with de-tuning reactor and power factor correction capacitor (2552 kVAr); 24000 HP synchronized motor for propane refrigeration compressor; the starting capacitor (21.3MVAr); and medium voltage transformers for the other motor control centers within facility.

Musreau Gas Plant Water Handling Pump Station, Electrical Lead The scope of the project was to design the modifications for the existing sour gas plant. The modifications were to install new packages:

-Inlet Slug Catcher, Inlet Liquid Separator, Recycle Air Cooler, Recycle Separator, Recycle Compressor Package (MV motor 800HP with VFD), 25000 BBL Water Tank, Water Transfer Pump (two MV motors 1000HP with VFDs).

Younger Extraction Plant- Valve Replacement, Electrical Lead Replacing a few existing pneumatic valves with new actuator and automated valves at the Plant that have been leaking/malfunctioning.

Paramount

Musreau Gas Plant Inlet Sweetening, Electrical Lead The scope of the project was design of the new gas processing train. The Inlet Gas Sweetening Plant expansion consist of installing new packages:

- MCC building (including LV MCC line up with 3 main breakers 2500A, two MV motors 450HP with VFDs, and two MV transformers 2MVA), amine plant, vapors recovery compressor (VRU), amine/water make up pump package, heat medium package, reverse osmosis package. SemCAMS

Wapiti Gas Plant, South of Grand Prairie, Alberta The new facility, capacity 200 mmscfd of gas.

The major packages were:

- Medium and low voltage transformers, MCC buildings, switchgears, motor control centers (MCCs), VFDs, and emergency generator at 480V with all electrical requirements for the gas plant. Athabasca Oil Corporation

New Sour Gas Compressor Station, Fox Creek, Alberta The project was design of the compressor station 62 mmscfd of raw inlet gas with 0.5%H2S, 7.695 bpd of condensate and 8.316 bpd of produced water.

The major packages were:

-MCC building, 3-phase Inlet Separator, Gas Compressor, Emulsion Pump Package, TEG Dehy Package, Instrument Air Compressor, Fuel Gas Package, LP/HP Flare System, Office/Control Room.

Brownfield Sour Gas Oil “Saxon” Battery Upgrade, Fox Creek, Alberta, Electrical lead The project included addition of the new process buildings: VRU and truck-out pump stations, contactor panel. Vesna Lukic, Electrical Engineer, Phone: 403-***-****, email: adgsbv@r.postjobfree.com 4/4

Birchcliff Energy, Lead Programmer

Process facility 30 mmscfd sour gas –Pouce Coupe South Sour Gas Plant, Phase1 & Phase2; Dawson Creek, British Columbia

Programming, integrating and commissioning control system (PLC and HMI) for the whole plant. Integrating the vendor packages to the main control system.

Spectra Energy, Programmer

West Doe Gas Plant –Phase 3 Expansion, Dawson Creek, British Columbia Programming, integrating and commissioning control system (PLC and HMI) for the third train in existing facility.

JFK Systems, Narmco Group, Windsor, ON June 2001-June 2008

CNRL-Auto-motive industry plant, Robot and PLC Specialist Troubleshooting and root cause analysis of the robot and press line-ups in auto industry plant. Automation and controls design of the automotive cells for the different type of the cars (Allen Bradley RSLogix 5000, RSLogix500, RSLogix5, RSLinx, HMI RS View, and DeviceNet). Programming robot cells, welders and presses.

Education:

Bachelor of Science in Electrical Engineering, Belgrade, Serbia APEGA Professional Engineer Designation

EGBC Professional Engineer Designation

ETAP Course-Power Study

Canadian Electrical Code Upgrade – SAIT

Allen Bradly Seminar

H2S Alive, WHMIS, First Aid Course

Contact this candidate