Electrical Engineer Manager

Location:

Ploiesti, Prahova, Romania

Salary:

8000 USD Negotiable

Posted:

September 29, 2020

Contact this candidate

Resume:

Name: Emil Foianu

Nationality: Romanian

Marital status: Married

Birthday: 14/01/1971

Passport details: No: 005*******; Expiry date 08 September 2022

Address: Romania, Prahova County, Ploiesti City, Street Intrarea Daliei Street, no 7, bl.15G, Ap. 9

Mobile phone: +40-723******

Email: *******@*****.**.**

Driving Licence: 23 years’ experience

Profession: Lead Electrical Engineer

KEY QUALIFICATIONS

-Experience in leading projects from conception through construction and coordination of installation and commissioning activities with vendors and subcontractors for equipment of all voltage levels (400kV, 220kV, 132kV, 110kV, 33kV, 20kV, 11kV, 6kV and Low Voltage - 415V), Uninterruptible Power Supply Systems (UPS): 110VDC, 48VDC, 24VDC.

-Experience in Conceptual, Front End Engineering and Design, Detailed Engineering of EPC projects including utilities lists and Equipment sizing, Single Line diagrams, Cable sizing, Earthing & Lightning design, Electrical layouts (equipment, trench, lighting, earthing and lightning, cable routing), material requisition and technical evaluations, electrical Material Take Off, battery sizing calculation, etc.

- ETAP - Power System Study, Load Flow Study, Short Circuit Study, Protection Coordination Study, Arc Flash Study,

-Experienced in selecting electric materials and equipment based on hazardous area classification.

-Conversant with relevant international standards and experience with Company and/or Shell Group projects and standards (SPs and DEPs) and PDO Procedures: Electrical Safety Rules (ESR), Project Control Assurance Plan (PCAP), Discipline Control Assurance Framework (DCAF), and SAFOP.

-Familiar in working with Oman Electricity Transmission Company (OETC) and hands on experience of Oman Electrical Standards (OES).

-Familiar with International Standards: IEC & IEEE standards, NEMA, ANSI, NFPA.

-Experience in Electrical basic calculations, developing specifications for electrical equipment and required systems for wells field.

-Experience in Project Management Contracts (PMC) work.

-Experience in working in Project Management: Business Case and Project Initiation Documents, Cost-Resources-Time Estimations, and Risk Assessment.

-Experienced in providing the required electrical systems for construction of new buildings, boundary wall, fences, internal roads, access road to substation, construction of new cable duct and cable trenches, transformer foundations with fire protection / blast walls and oil collection pits, outdoor equipment foundations, etc. with all the necessary facilities provided for a fully functional substation, including HVAC System, CCTV System, and firefighting system.

EDUCATION AND PROFESSIONAL STATUS

Bachelor of Engineering in Electrical – Polytechnic University of Bucharest – Romania, 1995;

Discipline: Plant Substations, High Voltage Power Transmission, High Voltage and Low Voltage Power Supply.

ABILITIES

Easy communication with different teams and cultures;

Easy adaptability to changing working hours, conditions and regulations specific to each job;

Ambitious, creative, orientated to details, electrical, mechanical and technical aptitudes;

Fully oriented to accomplish customer’s needs and expectations;

Excellent work ethics, impeccable history of safe work practices;

Strong technical background and experience in electrical design and project management

Experience in leading teams and setting goals and milestones to fulfil the job’s goals.

Experience in control room design work and operation team coordination;

Strong knowledge of: MS Office, Outlook, Internet, Networking;

Knowledge of others PC software (ETAP, TraceCalc Pro2, Relux, DIALux, AUTOCAD, EDSA, SAP);

Very good health and fitness;

HSE driven mind set;

Strong culture of health, safety and environmental attitude.

EXPERIENCE RECORDS

JULY 2019 – MAY 2020

CASPIMUNAYGAS, KAZAKHSTAN

Job Position: Lead Engineer – Electrical

Basic Responsibilities as a Client’s Consultant – Detail Design, mainly for Tengizchevroil (TCO) Projects:

Client’s Consultant work:

Preparation of all Detail Design Drawings and Documentations: ETAP Studies (Power System Studies, Protection Coordination Analysis, Arc Flash Analysis, Load Flow Study, Short Circuit Study), Electrical Equipment Sizing Calculations, Load Schedule, Cable Sizing Calculation, Lighting Calculation, Trace Heating Sizing Calculation, Hazardous Area Classification, including Material Requisition, Technical Bid Evaluations, Job / Work Pack.

Review & Approve all Vendor’s Documents/Drawings and Material Sheets.

Specific Projects:

Client: TCO (Client’s Consultant work – Detail Design Lead Engineer)

018-18 OLD BOILER HOUSE UPGRADE

032-19 Four Wells Replacement MWP

058-16 IMPROVED OIL RECOVERY KOROLEV LARGE SCALE PILOT

JULY 2018 – JULY 2019

Wood PSN KAZSTROY, KAZAKHSTAN

Job Position: Principal Engineer – Electrical

Basic Responsibilities as a Client’s Consultant – Detail Design, mainly for North Caspian Operation Companies (NCOC) Projects:

Client’s Consultant work:

Preparation of all Detail Design Drawings, Documentations, and Electrical Equipment Sizing Calculations, Load Schedule, Cable Sizing Calculation, Lighting Sizing Calculation, Trace Heating Sizing Calculation, including Material Requisition and Technical Bid Evaluation.

Review & Approve all Vendor’s Documents/Drawings and Material Approval Sheets.

Construction Site Support for NCOC Projects – Karabatan Area.

Specific Projects:

120***-***** Additional Reboilers to Oil Units:

Client: NCOC (Client’s Consultant work – Detail Design Lead Engineer)

Electrical Scope includes all related Green Field and Brown Field electrical works required for Installing 6 (six) new Reboiler Vessels across Train 1, 2 and 3 respectively.

Design of Power supply for equipment, small power and lighting systems: normal, essential and emergency.

Design of Trace Heating for Heat Systems: Conservation and Winterization.

Selection of entire electrical equipment according to hazardous area classification.

Design of Earthing systems for all equipment.

2017 (NOVEMBER 14TH) - 2018 (JUNE 14TH)

SNC LAVALIN FAYEZ, SAUDI ARABIA

Job Position: Senior Electrical Engineer – Acting as Lead

Basic Responsibilities as a Contractor’s & Client’s Consultant mainly for ARAMCO Projects:

Contractor’s Consultant work:

Detail Design Drawings, Documentations, and Electrical Equipment Sizing Calculations, Lighting Protection Calculation, Electrical Power System Studies (ETAP), Battery Sizing, Solar Photovoltaic Panel Sizing, AC-DC UPS Sizing, Lightning and Earthing Calculations, Material Requisition, Technical Bid Evaluation and Construction Support.

Client’s Consultant work:

Review & Approve all Vendor’s and Detail Designer’s Documents/Drawings and Material Approval Sheets.

Specific Projects:

Al Ju’Aymah Pipe Line JPS1-1 - Construction of 163km of new 48” JPS1-1 pipeline, “Arabian heavy delivery to Yanbu’ East West pipeline

Client: ARAMCO

(Client’s Consultant work – Detail design Lead Engineer)

The Scope shall include new scraper launcher with related facilities inside the existing Ju’aymah Tank Farm - Scarper Area, all piping starts from tie-in valves, all task lighting, area lighting, power supply, grounding and all electrical activities for new facilities.

Land RIG Manufacturing Facilities Initiative in Ras Khahir area.

Client: ARAMCO

Contractor’s Consultant work – Detail Design Lead Engineer for:

The Project aims to provide a world-class Facility in manufacturing oil Land Rigs and its components in order to secure the Company’s drilling operations in Middle-East and Northern Africa (MENA) region at competitive cost. The facility will deliver onshore rigs with vertical integration to Casting, Forging, and Precision Machineries as needed.

Ras Tanura Refinery – Replacement of 5 storage tanks and related facilities.

Client: ARAMCO

(Client’s Consultant work – Detail Design Lead Engineer)

The scope of work includes Demolition, Site Preparation & Geotechnical Investigation, FEED, Tank Supply & Installation, all Civil, Structural, Piping, Electrical & Instrumentation Work, and Pre-Commissioning and Start-up Support.

Basis of Design for Photovoltaic Solar Panel System at Qurayat, Madinah and Rafha in Saudi Arabia –

Client- Joint Venture between ARAMCO, Saudi Electricity Company and other private companies.

Contractor’s Consultant work – Detail Design Lead Engineer for:

Construction of 3 (three) Solar Photovoltaic Power Panels Generators by 200 MVA, 50 MVA and 100 MVA, respectively, including 33kV collecting system and step-up substation to 110kV and interface coupling point with Saudi Electricity Company – Transmission System.

Sub-manifold Expansion in SDGM Area – Accommodate future gas wells and re-route flow lines associated to SDGM RH-F.

Client: ARAMCO

(Client’s Consultant work – Detail Design Lead Engineer)

The scope of work includes Site Preparation & Geotechnical Investigation, FEED, Equipment Supply & Installation, all Civil, Structural, Piping, Electrical & Instrumentation Work, and Pre-Commissioning and Start-up Support.

Electrical works associated with supplying future gas wells, re-route the flow lines, burn-pits and related access roads associated to 20” trunk lines and existing Over Head Lines and associated step-down transformers.

2017 (JUNE 5TH) – 2017 (OCTOBER 30TH) AFAQ AL-MUSANA TRADING LLC, OMAN

Job Position: Project Manager - Electrical

Basic Responsibilities:

Leading cross-functional teams for handling Civil, Mechanical, Plumbing, Electrical, and HVAC works; handling matters pertaining to local statutory bodies, architects, and process technologists to troubleshoot customer issues.

Specific Projects:

Construction of Primary Substation 33/11kV - Royal Oman Police Facilities.

Client – Muscat Electricity Distribution Company (MEDC)

(Contractor Work – Project Manager)

Construction of 12 Critical 33kV Interlink Feeders between three (3) 132/33kV Substations in Sohar Area of Oman

Client – Majan Electricity Distribution Company (MJEC)

(Contractor Work – Project Manager)

2015 – 2017 (June 4th) MOTT MACDONALD & COMPANY LLC, OMAN

Job Position: Principal Engineer - Electrical

Basic Responsibilities as a Client’s & Contractor’s for Detail Design Contracts and Consultant for PMC.

Contractor’s Consultant work:

Preparation of all Detail Design Drawings, Documentations, Electrical Power System Studies (ETAP), Battery Sizing, AC-DC UPS Sizing, Lightning and Earthing Calculations, Electrical Equipment Sizing Calculations. Protection and Metring Diagrams, Block Logic Diagrams, Current Transformers and Voltage Transformers Sizing Calculations.

Client’s Consultant work - PMC:

Review & Approve all Vendor’s and Detail Designer’s Documents/Drawings and Material Approval Sheets.

Specific Projects:

Construction of 132/33 kV Grid Station at Al DREEZ and associated Overhead Transmission Line from IBRI Grid Station - Client: Oman Electricity Transmission Company.

(Client’s Consultant work – PMC Lead Engineer)

Construction of 220/132/33 kV Grid Station at Madinat Sultan Qaboos -2 (MSQ2)

(Contractor’s Consultant work - Detail Design– Lead Engineer)

Construction of 220/132/33 kV Grid Station at Sohar Free Zone and associated Overhead Transmission Lines - Client: Oman Electricity Transmission Company.

(Client’s Consultant work – PMC Lead Engineer)

Construction of Jaalan Bani Bu Hassan (former Al Kamil & Al Wafi) 132/33kV Grid Station and Associated Transmission Line. - Client: Oman Electricity Transmission Company.

(Contractor’s Consultant work – Detail Design Lead Engineer)

The scope of this EPC Project shall include engineering, procurement and supply of all equipment and materials, construction, and commissioning of equipment and all related civil works, firefighting and CCTV works, and HVAC system.

Construction of 220/132/33 kV Grid station at Sohar Free Zone (SFZ Grid Station) with associated Up-gradation of existing 132 kV LIWA Grid Station (including addition of two (2) nos. 132 kV GIS bays) and interconnection of SFZ and LIWA Grid Stations with 132 kV Cable – Client: Oman Electricity Transmission Company.

(Client’s Consultant work – PMC Lead Engineer)

Construction of 132/33 kV Grid Station at SAADA– Client: Oman Electricity Transmission Company.

(Contractor’s Consultant work - Detail Design – Lead Engineer)

Construction of 132/11 kV Grid Station at DAGHMAR– Client: Oman Electricity Transmission Company.