Resume

Sign in

Mechanical Engineer Operator

Location:
Nigeria
Posted:
September 27, 2020

Contact this candidate

Resume:

ARUAH, SILAS ONYEBUCHI

PERSONAL INFORMATION

Contact Address :

No. 1 Road 3 Golden Estate Rumunduru off Ogunka Street

Rumuewhara.

Port-Harcourt Rivers State Nigeria.

E-mail: adggdc@r.postjobfree.com OR adggdc@r.postjobfree.com

Tel : +234********** OR +234**********

Date of Birth: 23rd SEPT. 1966 Marital Status: Married Nationality: Nigerian

Sex : Male State of Origin: Enugu

SUMMARY OF WORK EXPERIENCE

A trained mechanical Engineer with four (4) years of day to day relevant experience in Oil & Gas industry in addition to over fourteen(14) years as mechanical technician in the same industry both onshore and off-shore. I have within these years acquired lots of experiences in Quality, Health, Safety and Environment in the industry. I have a very good understanding of various Engineering operations, procedures and standards based on my wide experience and professional/academic qualifications in Oil & Gas. I am knowledgeable in the use of various soft ware, Microsoft Word, Excel, Publisher & Power Point and Project management - Primavera P6 )

EDUCATION

2006-2011: University of Port- Harcourt, Nigeria

B. Eng. Honours Mechanical Engineering.

1988-1992: Metallurgical Training Institute Onitsha, Nigeria

MTI Diploma (HND Equivalent).

1980-1985: Government Technical College Nsukka, Enugu

WASC (West African School certificate)

WAEC (West African Examination Council)

FCC (Federal craft certificate)

TT3 (Trade Test grade 3)

1974-1980: Enugu Road Primary School Nsukka, Enugu

First School Leaving Certificate.

PROFESIONAL CERTIFICATES AND AWARDS

Member of the Nigerian society of Engineering Technicians

(Affiliate of the Council for the Regulation of Engineering in

Nigeria (COREN)). Membership No: NISET/1456T/11.

Certificate of Excellence for 1992 Best graduating student in Mechanical Department (Delta Steel Company Limited Onwian-Aladja Nigeria)

Certificate of proficiency in swimming (Nigeria Institute of Safety Professionals)

COURSES ATTENDED

Engineering Project management - Primavera P6 (Ad’mas Digital Information Technology Port-Harcourt Nigeria)

Microsoft Applications – words, excel, publisher, and power point presentations (Ad’mas Digital Information Technology Port-Harcourt Nigeria)

5-Day HUET and Offshore Survival (OPEANS Safety Cosultants Port-HarcourtPort-Harcourt Nigeria)

First Aid, Fire Fighting (Slb Port-Harcourt Nigeria)

Global TOPS Train the Trainer (SLB British Training Center - BTC - United Kingdom)

TLC-HA Basic Training School (Slb Port-Harcourt Nigeria)

H2S Training (Slb Port-Harcourt Nigeria)

Basic store management system – SWEPS (Slb Port-Harcourt Nigeria)

Permit to work (PTW) (Slb Port-Harcourt Nigeria)

QHSE-2 for Supervisors/mid management staff (Slb Port-Harcourt Nigeria)

SQM Training, Overhead Crane Training (Slb Port-Harcourt Nigeria)

WHE (Well Head Equipment) maintenance (Slb Port-Harcourt Nigeria)

Explosives,Gun Loading, Servicing of Firing Heads and Adapters(Slb Port-Harcourt Nigeria)

Enerjet, HSD, Puncher, Chemical Cutter, Back-off, Plugs & Packer Setting(Slb Port-Harcourt Nigeria)

Safe Wireline Winch Operations (Slb Port-Harcourt Nigeria)

10k WHE operation and control (Slb Port-Harcourt Nigeria)

Stepping, Handling and Lifting (Slb Port-Harcourt Nigeria)

Hazard Identification, reporting and control (Slb Port-Harcourt Nigeria)

Hazardous Materials and management Slb Port-Harcourt Nigeria)

HIV/Aids (Slb Port-Harcourt Nigeria)

Fatigue Management and Work smart (Slb Port-Harcourt Nigeria)

Malaria Prevention (Slb Port-Harcourt Nigeria)

Lock out Tag out program (Total Safety Rep on board DEEP Water Discovery)

Electrical Safety Slb Port-Harcourt Nigeria)

I.T Security (Slb Port-Harcourt Nigeria)

Accountability Roll Out Package (Slb Port-Harcourt Nigeria)

DT Vehicle Passenger, Data Quality (Slb Port-Harcourt Nigeria)

Fishing, LWF Training (Slb Port-Harcourt Nigeria)

Work Experience

JUN. 2014 – TILL DATE : DELTA-PROD ENGINEERING LIMITED,

Port-Harcourt Rivers state Nigeria

POSITION HELD: Engineering QHSE Coordinator

JOB SCOPE:

Promote Quality, Health, Safety and Environment awareness culture within the company.

Review and up-date the safety procedures periodically.

Maintain effective communication with the client safety office.

Provide support to the management in controlling all QHSE issues.

Organize trainings and conduct QHSE awareness campaigns.

Maintain 100% equipment certification at all times.

Using RIR program for accessing, comparing and reporting compliance and commitment of the organisation to QHSE.

Responsible for the development, training and continuous evaluating peers to facilitate maximum contribution from every staff.

Policing the full implementation of the safety rules and procedures in carrying all tasks in the organization.

Develop and maintain excellent relationship with both internal and external customers.

Planning and presentation of weekly QHSE meeting.

Preparing weekly and monthly QHSE reports.

Carry out quarterly and annual safety audit and present recommendations for improvement.

Investigating, analyzing all safety issues, failures, accidents and identifies the root causes.

Supervising the closing out of safety reports and documentation of lessons learnt.

MAJOR PROJECTS

Design and fabrication of Chemical storage containment and Chemical Injection skid shield.

Oct. 2010– Jun. 2014 : SCHLUMBERGER NIGERIA LIMITED,

PORT-HARCOURT NIGERIA.

POSITION HELD: EXPERT OPERATOR/IN-HOUSE COORDINATOR

CASED HOLE.

JOB SCOPE:

Work as mid management staff, directly assisting the Field service manager in coordinating all field operations.

Issuance, supervision and closure of permit to work (PTW)

Supervision and follow-up of the maintenance of all tools and equipment from well sites.

Ensures the compliance of safety by all operational staff.

Champion safety through exemplary leadership

Maintained effective communication between the base manager and the maintenance supervisor.

Carry out pre-mobilization inspection with the clients - Shell, Total, Chevron, ExxonMobil, Addax, etc.

Follow up with the logistics supervisor on the equipment certification and re-certifications

Preparation and maintenance of ready boxes for case-hole operations (perforation and cased hole logging tools)

Service and maintain all perforation down-hole assemblies and accessories.

Carry out inventory of all flow supplies for case-hole operations and repair and maintenance parts.

Conduct Commentary Task Assessment (CTA) for all operational staff.

Carry out Surface Integration Test (SIT) for third party companies.

Responsible for all case-hole mobilization and demobilization to and from well sites (Land, Swamp, off-shore rigs and rig-less operations).

Jun. 2009 – Oct. 2010 : SCHLUMBERGER NIGERIA LIMITED,

PORT–HARCOURT.

POSITION HELD: BASE FOREMAN OPEN HOLE OPERATIONS

JOB SCOPE:

Report directly to the base manager but functionally to the Field Service manager.

Assisting the Field Service manager in organizing the crew depending on the logging programme.

Take full ownership of the shop floor activities ( job preparations and post job)

Supervision of crew mobilization in the base and load out.

Maintaining and sustaining a clean base at all times.

Follow up the operators’ Global TOPS training programme to make sure that every operator is qualified and certified to carry out any given task.

Assigning the operators project or daily task and supervising to completion such tasks.

Organizing morning operators’ operational meetings.

Champion quality and safety awareness in the base.

Enhance Engineers/operators’ cordial relationship to engender team spirit.

Follow up preventive maintenance on rig-up equipment and down hole accessories.

Issue and supervise permit to work (PTW)

Identify operators with high potentials and those that are weak.

Appraise and recommend operators for higher responsibility or promotion.

Follow up all base maintenance geared towards improving the base.

Lead and encourage operators to show commitment to risk identification, reporting and closure.

Follow up failure analysis and closure in the base.

Prepare weekly and monthly report to upper management.

Actively take part in the quarterly/annual base audit.

Oct. 2007 – May. 2009 : SCHLUMBERGER NIGERIA LIMITED

PORT-HARCOURT,

POSITION HELD: GEO-MARKET OPERATORS’ TRAINER

(WEST AFRICAN SUB REGION)

JOB SCOPE:

Responsible for training of the Geo-Market operators and tracking of their progress in Global-TOPS.

Support the development of operators through teaching and coaching, both at the shop and the well sites

Organize and deliver shop and class room based training sessions for operators.

Plan schools by outside Trainers to address specific areas/subjects eg; WHE, CHC

Identify areas of operator weakness and address these with individual or location specific training.

Act as a representative of the SDM to the operators towards the SDM and the management.

Ensure that operators understand and comply with rules and procedures.

Promote within the operator community an awareness of the importance of service quality.

Responsible for ensuring that Global TOPS in implemented fully across the Geo-market.

Review, sign-off task sheet to ensure consistent standard across the Geo-market.

Review Global TOPS based promotions t ensure consistent standards are maintained.

Monitors and analyzes service quality results and help the SDM formulate corrective action plan.

Promote a safety awareness culture within the operators’ community.

Provides support to management in controlling REW specific QHSE risks.

Train and develop operators to be able to conduct unsafe act and hazardous situation audit/ identification.

Through well site visits and training continuously push to optimize the safety and efficiency of the operators in the Geo-market.

Oct. 1996-Oct. 2007 : SCHLUMBERGER NIGERIA LIMITED.

POSITION HELD: WIRELINE FIELD OPERATOR

(From Trainee Field operator to General Field

Operator )

JOB SCOPE:

To follow instructions from the Supervisor to achieve the desired outcome for the client’s well operations program.

To operate wire line tools and equipment as required within the capabilities of the operator’s core competency level in a manner consistent with the company and client work instructions in order to achieve the safe delivery of all objectives as set in the client’s various operations program.

To comply with the Company and Clients/Customer Health, Safety, Environmental, operational, procedures and Work Instructions.

To actively participate in the promotion of good QHSE practice, safety audits on required basis.

I maintain a clean work area at all locations and that all tools and equipment used are maintained in a good, clean and functional conditions.

Complete Company Operational reports in accordance with Quality Procedures in a timeframe consistent with clients and company expectations.

Ensure that Trainees under my immediate control conduct their work in accordance with Company Client / Customer approved practices. Encourage and coach assistants in an attempt to gain their different competence levels.

Ensure that Company Equipment sheave, fishing equipments, TLC valid Certification, is in good condition and safe for use prior to and during Operations.

Comply with Company and client rules regarding the correct use and operation of Personal Protective and Safety Equipment in order to ensure a safe and incident – free workplace environment.

Contact Client Company office on a daily basis or as instructed to receive job and check- in details.

Additionally, attend pre- and post – job briefings as instructed to ensure that the communication of issues and information is facilitated.

Attend industry and Company training as instructed and required by the Company, industry or clients (per spud meetings, team-build events, etc as requested by the Client)

Skills

Computing Skills : I have good knowledge of Microsoft Word, Power point,

Excel publisher and Engineering Project Management (Primavera P6).

Engineering Software : ● EngineeringEngineering/Industrial safety

● AutoCAD and Primavera P6.

● E-electric logging operations

● Mechanical maintenance

● Experienced working both onshore and off-shore

locations.

● 10k pressure equipment operations, controlcontrol

and maintenance of WHE?

Interest

Sports : Swimming, Playing football and table tennis.

Referees

Engr. D E Ozioko

DELTA-PROD ENGINEERING LIMITED,

Port-Harcourt Rivers State Nigeria.

Phone: +234**********

E-mail: adggdc@r.postjobfree.com

Eustace Amah

SCHLUMBERGER NIGERIA LIMITED

Port-Harcourt Rivers state Nigeria.

Phone : +234**********

E-mail : adggdc@r.postjobfree.com



Contact this candidate