Ability Highlights
**+ years of *G/VoLTE/LTE/WCDMA/GSM RF design & optimization experience.
Multivendor and Multicultural environment work exposure (Ericsson, Samsung and Huawei)
Well versed in Ericsson process, hardware & software evolution and optimization techniques
Ericsson Certified Services Engineer – Experienced (LTE/3G/2G), ECFO-LII
Hands on working experience with Atoll, Planet and Asset – Project setup, Site data base preparation, Antenna pattern verification, Traffic map preparation and Analysis of different metrics
Network Strategy selection and traffic analysis
Good understanding of 5G NR, call flows & SA/NSA architecture
Excellent understanding of RF design, propagation model and link budget
Professional Experience
GTA (Global Technology Associates), USA Jul 18 – Current
SME (VoLTE) – Sprint Central Region
Providing technical solution & root-cause analysis for VoLTE related issues to different markets of central region of Sprint.
Feature trial of Ericsson & Samsung RAN features, analyzing pre-post KPIs and preparing final report with proposal (ROHC, TTI bundling, PDCP & RLC Timers, etc.)
Analyzing VoLTE/LTE Accessibility (RRC setup fail, SIP session setup fail & ERAB fail), Mobility (HO fail, HO latency, RTP HO interruption time & ping-pong HO), Retainability (RRC drop, SIP session failure & voice drop) & Quality (SINR, MOS & RTP gap) issues and providing recommendation for improvement.
Audio gap and packet loss analysis and providing improvement plan
VoLTE traffic management using mobility event parameters (A1, A2, A3, A5-1 and A5-2).
Troubleshooting worst offenders for sudden KPI degradation and providing solution to restore
Coverage analysis through atoll and recommending physical changes to improve coverage
Optimizing massive MIMO sites and supporting initial launch of 5G sites in KC area.
Analyzing drive logs and L3 messages to find out root cause of failure through windcatcher
KPI verification among OSS counters, PRTS, Netscout probes and drive test
Developing Alteryx workflow & SQL queries for automating day to day to activities
Tools Used: True-call, IRIS, nBA, nG1, Wireshark, PRTS, Tableau, FTT, Cisco SON, Alteryx, MapInfo, Google Earth, Atoll, Windcatcher, QXDM, UE Trace, Cell Trace, OSS trace recorder & Decoder, Ericsson ENM, Nokia NetAct, Samsung LSM
NAK-MCI, Iran Jun 16 – Apr 18
RF Planning & Optimization Consultant (VoLTE/LTE)
Initial Tuning and performance improvement of VoLTE/LTE network of MCI (North Ericsson)
Worst cell analysis and providing solutions to improve Accessibility, Retainability, Integrity and Mobility KPIs.
Activating and tuning VoLTE/LTE related features for basic and enhanced capabilities
SSV and Cluster optimization through drive test and OSS KPI
Physical optimization to improve coverage and quality
Traffic Map preparation in Atoll from operator input and propagation pattern
Coverage, Quality, Throughput, SINR plot preparation in different magnitude (Cluster, City, Market) in Atoll
Root cause analysis through L3 message of Drive test log
Solving issues related to VoLTE, CSFB, SRVCC and Carrier Aggregation
Improving accessibility, retainability, mobility and integrity KPIs for both LTE and 3G
Feature trial to improve coverage and capacity
Ericsson, Bangladesh Mar 16 – May 16
Optimization Consultant (LTE/3G)
Responsible for optimizing 3G network to meet post swap benchmark KPI.
Standardizing global parameters and strategy fixation
Worst cell analysis, root cause analysis of KPI degradation & proposing improvement plan.
Supporting presales team in LTE related queries.
NAK-MCI, Iran Jun 14 – Feb 16
RF Planning & Optimization Consultant (LTE/3G)
Improve and maintain KPI of LTE/3G network of MCI (Tehran Ericsson region)
External interference analysis through counter and drive test
Ensuring customer perception and KPI during special events.
Design and verification of new site parameters through Atoll
LTE/3G throughput optimization
CDD preparation, consistency checking and License Capacity Audit
Creating and tuning network strategies (Idle mode, Mobility, etc.) with evolving scenarios.
Hardware and software capacity report Preparation for RNC, Node-B, eNB (Proactive-Reactive)
Handle VIP complain and Prepare details report for particular GEO Location and Action plan
L3 Analysis from GPEH, UETR, CTR, UE Exception report
Ericsson, Bangladesh Mar 13 – Jun 14
Exp. Service Engineer (3G)
KPI optimization lead in multivendor 3G project (RNC: Ericsson, BSC: NSN/Ericsson, CORE: Huawei).
Investigate poor performance and problematic sites using UEH_EXCEPTION, TE error logs, GPEH, UETR, CTR and decode using moshell and analyze and provide the route cause and solutions
Daily activities included: monitoring daily stats & alarms, analyzing BO reports, sending out KPI reports to customer, troubleshooting site issues and making performance enhancement recommendations to improve the network KPIs
Other detailed optimization activities included neighbor tuning, downlink power/code congestion identification, UL RSSI/ external interference troubleshooting, Iub congestion reporting, IRAT failures, low HSDPA/ EUL throughput, CS/PS drop calls and performing necessary parameter audits to ensure network integrity
Performing feature trials and sharing pre-post analysis with customer
Used Mentum Planet for Ooredoo/Qtel design project of Myanmar.
Design project set up and site database preparation
Map file conversion from old planet format to new (*.grc and *.grd) and verification of quality specification (resolution and correctness of information)
Antenna beam pattern verification with Antenna tools
Design database maintenance using data manager
Design Parameter (loss factors, channel powers) optimization
Propagation model tuning and estimation from drive test data
Ericsson, Indonesia Jan 13 – Mar 13
Exp. Service Engineer (3G)
Determination of height, azimuth and tilt of new triband antenna replacing three different band antennas using ECO (Ericsson Cell Optimizer).
Designing physical parameters for new cells
Detecting coverage holes and proposing new candidate sites
Ericsson, Bangladesh Nov 10 – Jan 13
Exp. Service Engineer (2G)
KPI, Parameter and formula mapping and negotiation with customer during swap projects.
KPI owner of different BSCs and Data Dimensioning
Proposing features and related parameters to be activated
Network optimization through xACP and xAFP
ZTE, Bangladesh Mar 10 – Nov 10
RNP/O Engineer (WiMAX)
Planning and Optimization of WiMAX network of Banglalion.
Planning Preamble index, UL-Permbase, Page Group and Cluster for new sites
Configuring RF parameter, Neighbor and Neighbor related parameters (HO, Trigger) for sites of Dhaka and Chittagong in Data Center OMC.
Tracing problems of sites (interference, HO, low Throughput) by Netneumen
Creating simulation of on air and planned sites using Aircom ASSET
Huawei, Bangladesh Apr 08 – Mar 10
RNP/O Engineer (2G)
Analyzing KPI to measure network performance and improve the performance through tuning various CS and PS parameters both BSC and cell wise.
Identify problems of operator raised worst cells (coverage hole, low mpd, high congestion & edge problem) and optimize those cells
Designing expansion plans for cells on the basis of built capacity and statistics
Ensuring proper data configuration and performance check of major KPIs at swap night. Provide instant solutions to raised problems
Performing Nominal Planning, Area Survey, RF survey
Education
Master of Engineering (Electrical - Electronics & Telecommunication) from University Technology Malaysia, Malaysia for the Year 2008, CGPA: 3.88 out of 4.00
Bachelor of Science in Computer Science & Engineering from Khulna University of Engineering and Technology, Bangladesh for the Year 2004, CGPA: 3.45 out of 4.00