Sanjay Dalvi
Mobile: +91-987******* Email: adg2u7@r.postjobfree.com
Middle level assignments in the areas residential & Commercial Project &working as a Senior MEP Engineer, Quantity Surveyor & Execution & MEP Co ordination Engineer & Design reviewer
Knowledge purview
Operations & Maintenance of the following:
1250 KVA POWER TRANSFORMER
11/.433KV Indoor Distributions Transformer
1250 KVA Generators
Lead acid batteries
AC Motor
Power factor Controlling
Star-delta starter
DC / AC Drives.
Circuit Breaker
UPS
01)Currently Working for Apeejay Educational Society as Assistant MEP Engineer from Dec 2019 to till Date
Job Responsibilities are as follows
1) Conduiting works in Slab wrt Drawings
2)DB, Switch Sockets, Cable laying, Wiring,Panel Fixing, Changeover, Transformer and DG Installation works.
3) Electrical Load Balancing review, Design Review with respect to Connected Load, Maximum Demand, Cable Size and Cable Length Factors,Quantity Review, Circuit Dressing, Fault Tracing works
4) Electrical Hume Pipe Installation works wrt FFL Levels
5) Complete Rate Analysis and Negotiation with Vendors of Electrical System like DG Set, Transformers, Cables,Wires,Switch Sockets, Panels etc.
6) Lightning Arrestor works and Earthing works execution and Testing, including preparation of Contracts upto Final Billing of the works
7) External Plumbing-Sewar line execution works,wrt Inward levels, FFL Level, Slope Ratios, Material Inspection’s
8) Internal CPVC, UPVC Pipe laying works, CP and Sanitary Fixing works wrt FFL Levels and Drawings,
9) Plumbing Borewell, Sump Pump, Domestic and Flushing Hydronumetic System Installation works.
10) External Sewar and Water supply connections wrt Liasionging Authorities
11) Complete Negotation with Vendors for CP Fittings,Sanitary,PVC,Hume Pipe and Rate Anaylsis works
12) Complete review of FF Works and execution of FF Works with respect to Drawings,Make Specified.
13) Testing and Commissiong of Fire Fighting Works- Underground,Sprinkler and Hydrant System.
14) Complete testing commissioning works of FF Jocky, booster, Main Hydrant and Stand by Pump
15) Complete review and execution of LV Systems like ACCESS CONTROL,CCTV, PA works
Worked for Turner Project Management India Private Limited as a Assistant MEP Engineer from May 18 to 31st Nov 2019
Job Responsibilities are as follows
Quantity Surveying
Design Review, Estimation & Costing of Residential & Commercial Building
Meeting with Clients; solving Difficulties regarding Projects.
Site Execution and attending and solving Practical Difficulties & checking all MEP Drawings is as per approved Layouts.
Checking & Approving Shop Drawing as per Site Condition & as per Design Consultant/Client .
Taking approval from Design Consultant/Client for Drawings & Material Product Submittal
Estimating & Calculation of Prime Cost MEP Package
Asking quotation from Vendors and Market Rates
Preparation of Rate Analysis
Review and Certification of Contractor RA Bills
Checking, Measurements of Contractor Bills
Preparation of Guidelines to Contractor Supervisor before execution of Project
Actual quantity Take off at Site and Preparation of Amendment Work orders for Processing of WO along with all detail back up sheets
Preparation of quantity take off list point vise for minimum loss of cables; wires & for cost control
Making of Comp Statement for MEP Pacakages
02) Worked for Capacite InfraProject Limited from Aug 17 to May 18 as a Senior MEP Engineer for Oberoi Enigma Project as a Electrical Conduiting in Embedded Works
Job Profile – Exection ;Billing Preparation of Shop Drawings ;Taking approval of Shop Drawings; Preparation of ITP,MIR Reports ;Pre & Post conduiting Checking with Client; Smooth Clearance to Civil Team for Slab Casting etc.
03) Working For Man Global Ltd as Senior MEP Engineer & reporting to AGM Projects from 1st Dec 16 to 1st August 17
Work responsibility-
1)Execution of Electrical wiring, Testing from flat wiring to external lighting & smooth operation and changeover from Main to DG Supply & vise versa
2)Checking of quality of material,Types as per PO/Work order and Quantity
3)Taking clearance from Civil and Finishing Engineers
4)Execution of MEP works as per drawing location plan
5)Execution of Plumbing works including testing of internal flats, Handover and Testing of Hypn System shaftwise
6)Execution and co ordination of Building infra works including Trench for electrical HT Cable, Plumbing Sewer line works, slope checking,External Fire Hydrant, MGL Gas line works for Residential and Commercial Gas line works, Irrigation line works and Trench for LV Works.
7)Testing of Fire Sprinkler system, Hydrant and Fire alarm system
8)Checking of material for feature works and indent of material as per requirement.
9)Follow up of contractors and vendor for material as execution of works at site
10)Day to Day reports and meeting, review and checking of design part.
04) Worked for Gem Eng serv Pvt Ltd. As a Senior MEP Engineer for Junobo Hotels Pvt Ltd
As a Billing Engineer for MEP Works from 22 June 2015 to 30th Nov 2016
Role and Responsibilities
Quantity Surveying for International Projects on OST Software completed below project QS Take off,
CB & I-Fuel Storage and Distribution Project-MEP Part
Fallon Airfield Runway Repair
Corpus Christie
KC-46A DEPOT MAINT COMPLEX SUPPORT INFRA, OKLAHOMA
Fallon Airfield RFP-Clinet Pave Tech.
Estimate and calculation of Prime cost for New work on floor
Asking quotation from Vendors
Preparation of Work Orders
Verification of Bills, checking measurements; material received; checking of test certificates; Testing for MEP Works.
QS take off for International Projects with OST Software.
05) Worked for Capacite- Prathibha Group (CEPL Capacite Engg. Pvt. Ltd.) Company
as a MEP Engineer. From March 2013 up till 21st June 2015
Role & Responsibilities (Working on India Bulls & Pan India BKC Project)
Quantity Surveying
Design Estimation & Costing of Residential & Commercial Building
Meeting with Clients; PMC Consultant & solving Difficulties regarding Projects.
Site Visiting attending Practical Difficulties & checking all MEP Drawings is as per approved Layouts.
Checking & Approving Shop Drawing as per Site Condition & as per Design Consultant/Client .
Taking approval from Design Consultant/Client for Drawings & Material Product Submittal
Estimating & Calculation of Prime Cost for New Projects
Asking quotation from Vendors
Rate Analysis
Preparation of RA Bills to Client
Checking & Approving Contractor Bills
Preparation of Performa Invoice
Execution of Projects MEP
Preparation of Guidelines to Supervisor before execution of Project
Actual quantity Take off at Site
Preparation of quantity take off list point vise for minimum loss of cables; wires & for cost control
Making of Comp Statement for DG Set, Bus Ducts,Transformers
04) Worked in Dongre Associates as a MEP Engineer from July 2012 to Feb 2013
Role & Responsibilities (Working on Hinjewadi)
Quantity Surveying
Design Estimation & Costing of Residential & Commercial Building
Meeting with Clients; PMC Consultant & solving Difficulties regarding Projects.
Site Visiting attending Practical Difficulties & checking all MEP Drawings is as per approved Layouts.
Making of MD Assist Sheets; Quantity Take of Sheets(MEP);MOM after Meeting ;Tight Communications with PMC; Asking quires regarding Drawings; Reports etc.
Document Control Sheets for MEP.
06) 02Years & 01 Month Experience(From 24th May 2010 to04th July 2012) in J P Morgan Ventura & L& T Sites Hirandani Powai as a Maintenance Engineer.
Responsibilities:
Hourly / daily checking of health of UPS & other Electrical equipments installed and maintaining records for the same.
Smooth change over of system from Mains to DG in case of power failure & from DG to Mains if power restore again in minimum downtime. Considering of Electrical & Mechanical system.
Fire alarm & Pre Amplifier testing in weekly basis.
To maintain smooth & continuous operations of connected load of the system without rise in Maximum Demand.
To daily ensure healthy conditions of DG set by taking no-load trials & weekly load trials.
Scheduling and planning preventive and breakdown maintenance jobs. Executing maintenance plans/schedules for reducing machinery downtime.
Maintaining monthly records of electrical power consumption, diesel consumption, etc.
Operate Electrical switchgears, its replacement with standby system in case of switchgear failure.
Handling day-to-day complaints regarding maintenance.
Monitoring of UPS, LT Breaker status & HVAC on BMS System.
Handling shift technicians / man power utilization.
DG Load Test carried out in month.
Preparing PPM schedule for all the Equipment
Vendor Management and co-ordination to ensure proper PPM activities.
If any incident happened then go through escalation process & inform to our senior about same.
Asking for Quotation From Vendors; Preparation of Quote Comparisons
Making of Weekly AFM Reports
Checking &Maintains Service Reports, Work Permits, History Cards of the Equipments, CR & PDPA Files Delivery Challan Files Etc
Previous Experience
July 12-Feb 13 Dongre Associates MEP Engineer(MEP Project)
May’10-July 12 Jones Lang Lasalle Shift Engineer (Electrical Maintenance)
Dec’09-May’10 Yashmun Engineers Ltd Site Engineer Power Distribution
Services
Academic Credentials
2000-2001: Secondary School leaving certificate from Saraswati Vidya Mandir Ghatkopar
2003- 2006: Diploma In Electrical Engineering from Dr. BATU University Lonere
2006- 2009: BE In Electrical Engineering from Mumbai University.
Courses / Training Undertaken
Successfully completed the following trainings / courses to enrich the knowledge base:
Completed Training Program in PLC & SCADA arranged by Automation & Control Systems Pune
Completed In Plant Training in Unichem Laboratories Limited Roha.
Personal Details
Fater’sname : Dattatray M Dalvi
Date of Birth : 07th November 1985
Sex : Male
Address : B/4/2014 Shree Gokuldham CHS Dawadi Dombivali East 421203
Current CTC : 10.32 Lac per annum.
Expected CTC 12.00 Lac per annum.
Languages Known : English, Hindi & Marathi.
Hobbies : Watching News & Discovery Programs
I affirm that the information given above is true and correct.
Thanking You.
Yours truly,
Sanjay D Dalvi.