Electrical Engineer Safety
Resume:
JEREMIAS I. CEŇO
Philippines Address: Sec. ** Block 6 Lot 13 & 15 Blue Isle Subdivision,
Santa Maria, Santo Tomas, Batangas, Philippines.
Qatar Address: AL SAAD Doha Qatar
Email Address: adfwp7@r.postjobfree.com
Mobile No. : +974-********
Objectives:
An aspiring team leader, hardworking and to secure a responsible and challenging position in an industry where I can use my skills, creative ideas, education and experienced.
To be an asset of the company by sharing my knowledge, abilities and to give my
very best at all times.
SKILLS:
Educational background in Electrical Engineering.
Computer literate and have ability to converse well.
Have high level in regards to safety and quality.
High level of integrity, confidentiality, professionalism and accountability.
Ability to work independently also in a team environment.
Ability to retain high level of accuracy and work under pressure.
Flexibility in work schedule and ethical code of conduct.
Good technical knowledge in specialized skill.
Honest and Hardworking.
Reliable and devoted to the interest of the company.
WORKING EXPERIENCE:
Inclusive Dates : January 2017 – May 2020
Company : Leighton Contracting Qatar
Name of Project : New Orbital Highway 3 and Truck Route (PO23)
(DRY UTILITY)
Position : Electrical Engineer
JOB DESCRIPTION:
Planning, supervising and coordinate with the sub-contractor prior to execute on site related to electrical works.
Supervising and Monitoring for the Street Lighting, Low Voltage and Medium voltage Setting-out trench excavation and formation level for the cable trench as per the approved shop drawing and KARAHMAA standard and regulations.
Plans and schedule for the group ensuring proper distribution of work assignment, equipment and adequate staffing and subsequent performance of duty.
Plans and control the actual execution on site to avoid clashing and damage of any existing utilities on site.
To check and review the drawing if all the information data of electrical cable size is complete.
Attend to the project consultant inspection on site.
Attend to the KAHRAMAA site inspection of LV and MV trench.
Supervising and Monitoring during the time of cable laying, jointing, cable gland and termination.
Planning for the installation of street lighting pole and street lighting feeder pillar Panel.
Review and Check if the type and size of cable lay on the trench as per the approved schematic shop drawing.
Monitor and check if all the trench had cable laying are fully complete sand surround and backfilled as per approved size of material and project standard.
Supervising and monitoring the type and length of street lighting pole installed on site as per the shop drawing.
Supervising and monitoring for the installation of substation according to type and location as per approved shop drawing.
Planning and supervising for the installation of cable gland and termination of cable in the substation unit.
Planning and scheduling for the fitting inspection and earth-fault relay test of the substation with the KAHRAMAA inspector.
Planning and scheduling to KAHRAMAA inspector for the shutdown and energization of the substation.
Performed the lux test of the street lightings, functional test and energization of street lighting feeder Pillar panel.
Conduct cable testing by means of continuity and insulation resistance test for Low voltage cable and High pot test for Medium voltage cable.
Preparing for the submission of Inspection Request (I.R.) of all activity done on site related to electrical works.
Closing of snag list.
Attend the Construction meeting for the progress report on site.
Inclusive Dates : April 2016 - January 2017
Company : Leighton Contracting Qatar
Name of Project : AL SAMARIYA TOWER DOHA TRADERS HOTEL
Position : QA QC/ Electrical Engineer
JOB DESCRIPTION:
Rectification of commented and rejected electrical drawings and re-submit for approval.
Preparation for material submittal for approval.
Preparing method statement.
Reviewed drawings and projects specification.
Makes periodic inspection of electrical installations.
Maintains accurate records and information regarding inspections.
Monitor the actual execution of all electrical related works of the project, to ensure that the project well done in the accordance with the approved construction drawings, project specification and applicable standards.
Coordinates with the client representatives on all quality issue.
Implement QA/QC management system on site.
Control all non-conformance reports and undertake remedial action.
Inspects and test electrical parts, assemblies and accessories prior to installation.
Checks electrical products for proper listing and insures all materials are install in compliance with the requirements of electrical fire and life safety.
Performed insulation test and continuity test for medium and low voltage cable, cable testing for grounding and lightning protection system and extra low voltage cable.
Performed testing and commissioning for Electrical Main distribution board and Sub-main distribution board panel, Generator set including functional test, central battery system, small power outlet, Normal and Emergency lighting system, fire alarm system, access control system, lighting dimming control system, guest room management system, Security management system, KNX system and building management system.
Inclusive Dates : June 2014 - April 2016
Company : MAPES Contracting Company
Name of Project : AL SAMARIYA TOWER DOHA TRADERS HOTEL
Position : QA QC/ Electrical Engineer
JOB DESCRIPTION:
Rectification of commented and rejected electrical drawings and re-submit for approval.
Preparation for material submittal for approval.
Preparing method statement.
Reviewed drawings and projects specification.
Makes periodic inspection of electrical installations.
Maintains accurate records and information regarding inspections.
Monitor the actual execution of all electrical related works of the project, to ensure that the project well done in the accordance with the approved construction drawings, project specification and applicable standards.
Coordinates with the client representatives on all quality issue.
Implement QA/QC management system on site.
Control all non-conformance reports and undertake remedial action.
Inspects and test electrical parts, assemblies and accessories prior to installation.
Checks electrical products for proper listings and insures all products are install in compliance with all the requirement and electrical fire and life safety.
Performed insulation test and continuity test for medium and low voltage cable, cable testing for rounding and lightning protection system and extra low voltage cable.
Performed testing and commissioning for Electrical Main distribution board and Sub-main distribution board panel, Generator set including functional test, central battery system, small power outlet, Normal and Emergency lighting system, fire alarm system, access control system, lighting dimming control system, guest room management system, Security management system, KNX system and building management system.
Inclusive Dates : October 2013 – June 2014
Company : Qatar Building Company (QBC).
Name of Project : GTC 299 Al Wukair RPS and Associated Pipelines
(Reservoir and Pumping Station)
Qatar General Electricity and Water Corporation
Position : Electrical Engineer
JOB DESCRIPTION:
Monitors the installation and construction works as per approved plans and technical specifications.
Prepares daily work activities and maintains logbooks of material testing and reports.
Monitors problems at site & recommends action as to the site conditions on regular basis.
Monitors the acceptable quality of works as the project is in progress.
Making testing and commissioning procedure.
Performed insulation and continuity test for low voltage and medium voltage, testing and commissioning inspection for low voltage cable, low voltage distribution board system, small power and lighting system.
Prepare the documentation for material inspection request.
Prepare material take-off and material request.
Plans and control the actual execution off all electrical related works.
Make rectification drawing as per site condition.
Manages directly and provide engineering and technical supports to all the electrical work groups at site.
Review drawings as per IFC.
Directly responsible for the safety of all electrical groups’ personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.
Inclusive Dates : March 2012 – May 2013
Company : Target Rotary LLC.
Name of Project : (New Doha International Airport Project)
CP95 & CP96
Position : QA QC/Electrical Engineer
JOB DESCRIPTION:
Performed inspection in a timely manner and recorded as per specification and standard drawing details as per inspection and test plan (ITP) and Inspection records (IR) requirements.
Monitors the installation and construction works as per approved plans and technical specifications.
Prepares daily work activities and maintains logbooks of material testing and reports.
Monitors problems at site & recommends action as to the site conditions on regular basis.
Attends to the project QAQC meetings and reports on issues and concerns.
Monitors and prepares materials inspection reports related to QAQC.
Conducts QAQC testing and submit initial reports to the QAQC Head.
Monitors the acceptable quality of works as the project is in progress.
To review the procedure to ensure inspection and test are specified conform to engineering drawings and specification.
Performed insulation and continuity test for low voltage and medium voltage cable, cable testing for earthing system, testing and commissioning inspection for low voltage distribution board system including functional test, small power and lighting system, lighting control system, central battery system, UPS Panel, fire alarm system and security system.
Performed inspection for testing and commissioning for Building Management System (BMS) and DDC control system.
Inclusive Dates : October 2010–March 2012
Company : Target Rotary LLC.
Name of Project : GTC 244 Duhail & UMM Qarn RPS and Associated Pipelines
(Reservoir and Pumping Station)
Qatar General Electricity and Water Corporation (KAHRAMAA)
Position : Electrical Site Engineer
JOB DESCRIPTION:
Site Electrical Engineer, plans, controls and monitors the actual execution of all electrical related works of the project,
Ensure that the project will done in accordance with all the approved construction drawings, contract documents, specifications and all applicable standards.
Generally responsible for implementations and monitoring of electrical related works at site.
Manages directly and provide engineering and technical supports to all the electrical work groups at site.
Plans the execution of all electrical related works and coordinates the works to mechanical and civil groups.
Assign targets for accomplishments and ensure targets are meet on daily basis for all electrical groups at site.
Submits site daily reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as required.
Ensures that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards.
Prepare materials take off.
Directly responsible for the safety of all electrical groups’ personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.
Inclusive Dates : October 2008 – March 2010
Company : Daewoo Engineering & Construction Co., Ltd.
Name of Project : Qatar Chemical Co. II Ethylene Derivatives Complex
Position : Electrical Supervisor
JOB DESCRIPTION:
Responsible for all aspects of Electrical power and control cable termination of electrical equipment in substation, motor pumps, heater as per installation details and interconnection diagram details.
Evaluates construction shop drawing details, method of statement of installation and termination work to achieve mechanical completion in accordance to standard and related specification.
Prioritizes work orders in relation to their importance and urgency.
Coordinates and supervise work teams in construction work site and organize work program.
Checked materials that conformed to the related specifications details.
Notify the electrical construction manager for completion of preparation to inspect at site.
Adheres to all safety and housekeeping standards established by the safety departments, sets standards for safety of all subordinates.
Plan and schedule work for the group ensuring proper distribution of assignment and adequate staffing and subsequent performance of duty.
Supervising electrical works such as installation of MCC panel, VFD panel, installation of lightings, wiring devices, which include installation of cable support, braces, conduits, cable trays, cable pulling, installation of Mineral Insulated Cable Conduit (MICC cable), installation of lightning and grounding system.
Oversees daily works and help electricians to work jobs problem.
Assistance of inspection and testing record when required at site.
Inclusive Date : March 2006 – April 2008
Company : Consolidated Contractors Company (C.C.C)
Name of Project : Khursaniyah Gas Plant (Saudi Aramco Project, Jubail, KSA
Position : Electrical Foreman
JOB DESCRIPTION:
Prepares all necessary tools and materials to be use in designated worksites.
Read and interpret constructions drawing details, method of statement, manufacturer or vendor data, schematic diagrams, installation details, project specification or related specification.
Oversee and supervise subordinates as per instruction of the immediate superior.
Conducts insulation resistance and continuity test prior for termination of cable.
Assistance in testing and record when required at site.
Performs installation of lightings and small power receptacle system.
Installation of power cable and termination.
Installation of electrical conduit, cable trays, MV panel and LV panel boards, support, braces and other electrical equipment.
Adhere all safety and housekeeping standard established by safety department.
Analyze work instruction, operating procedures and parameters to recommend modification.
Fully aware of the quality standard requirement of the company.
EDUCATIONAL BACKGROUND:
Bachelor of Science in Electrical Engineering
Technological Institute of the Philippines (TIP), Manila -1995 (Graduated)
OTHER COURSE:
Project Management
SEMINAR:
Limit of Acces (LOA) KAHRAMAA Permit Holder
H2S (QP/Safety Training Course)
PERSONAL INFORMATION:
Marital Status : Married Date of Birth : June 07, 1971
Place of Birth : Tagbilaran City, Bohol Age : 49 yrs. Old Citizenship : Filipino Weight : 155 lbs. Name of Spouse: Evelyn T. Ceno
Height : 5’5”
Contact this candidate