Engineering Design Engineer

PRAJEESH.T. V

Sr. Engineer-Instrumentation & Controls.

(Honeywell international Inc. PMT-ISC)

Contact# +91-854*******

************@*****.***

Passport#: H5181726, B1/B2 US Visa Holder Till 2027, L1-Visa 2020 Objective:

Seeking a job as Sr. Design Engineer- Instrumentation and controls, where I can use my extensive work experience to help the company to achieve its goal of excellence in the Project Field.

Overall 12 Years of experience and Well-versed Knowledge in national and international safety standards.

The following are the various roles handled during my carrier. Project Engineer, Project coordination, Project Planning, Project cost estimation, Design & Detailing Engineering, Technical Bid Evaluation, System integration, Construction support, Start-up &commissioning, Instrument Calibration, FAT, SAT.

Industries -Involved Projects.

Petrochemical Brown field and green field projects, Offshore Oil& Gas Wellhead Projects, FPSO modules, Refinery Expansion Projects, Power projects including turbines, Water treatment Projects including WHRB, HW, Building safety.

user in Smart Plant Instrumentation software modules, MS Visio, MS Excel, AutoCAD,

Involved in the following Wellhead, FPSO and refinery expansion projects .

HABAN-I gas wellhead project in foundation field bus protocol, (Client: GALFAR)

HABAN-II gas wellhead project in foundation field bus protocol, (Client: Petroleum Development Oman) for GALFAR.

FPSO Steam Generation Unit Module project, (Client: Aker Solutions).

New DHDS/CEMP project in Cochin refinery (NHT/CCR, VGO HDS, and SRU).

BCPL cochin refinery – SRU-Tail gas incineration unit. Academic Credentials:

2008 B.Tech. (Electronics Instrumentation Engineering) from Federal institute of Science and Technology, Ernakulum, Kerala.MG University with First Class Grade. 2015 PGDM/MBA. Project management from MG university. 2005 Diploma in E&I from Koratty poly-technic, Kerala state Technical board, 1st grade. 2002 12th from govt.-HSS, Ernakulam, Kerala with 1st grade. 2000 10th from Kerala state Board with 1st grade.

Key Engineering and Management Skills:

Lead the Engineering.

Coordinate the Team to execute the Projects in an accurate way by applying the engineering Standards (including national and international safety std.’s.

Represents the company with end user/Stake holders and EPC environments as a technical leader/authority.

Engineering Documents: Design Basis & Philosophy, Instrument I/O List, Instrument specification sheet (ISS), Instrument installation Schedule (IIS), Instrument mounting and piping details, Instruments points and line diagram, ILD, Block diagrams, schematic drawings, Cable, Conduit, tray Schedule, JB& Panel Wiring, Project Specification, Datasheets & MTO for all Instrumentation equipment.

Managing the Project independently as a single point of contact, Vendor Drawing Review, Interaction with Clients & Contractors, Coordination with other disciplines, Interdisciplinary document review, Support to Procurement team/Technical Bid Evaluation (TBE), floating of inquiries, construability plan review, MR Preparation & Support to Construction team & attending Site Engineering Request (SER) & Revising Engineering deliverables in accordance with SER.

System integration like PLC, SCADA, HMI, RTU related to Offshore instrumentation projects.

Capture lessons and conducts lesson learnt workshop within department.

Support FEED efforts with EPC and end user in scope definition, schedule and cost estimates, system definition and interface requirement.

Production of FEED deliverables for major projects including ICSS Basis of Design documents, interface specifications and architecture block diagrams through close collaboration across all engineering disciplines.

Selection & Sizing of various Instruments: Including control valve, orifice plate using SMART PLANT INSTRUMENTATION (INTOOLs).

Experienced in Control system (Honeywell/ABB/Siemens PLC/DCS system, Honeywell safety manger system).

Participate in P&ID review, 3D model review and other project review meetings.

Supports Owner/EPC engineering activities such as HAZOPS, LOPA, Risk Analyses, Cost Estimates, Scheduling, Power/Heat/Weight calcs etc.

Assist in the preparation of proposals, business plans and proposal work statements etc. Soft Skills

Six Sigma Green Belt Core Certified.

Able to take decision and execute.

Good written and spoken communication skills

Positive attitude & approach

Team player with good interpersonal skills

Software Skills

AutoCAD

MS Office- including Ms-Visio.

SPI - IN tools.

OPC UA.

PLC Logic programming knowledge, SCADA.

Web Designing skills -HTML, CSS, JS.

Work Preferences

Availability- immediately.

Desired Job Type-Full Time

Can Travel for Work-Extensively

Highest Education Level-B-tech in E&I engineering +PGDM/MBA in project management Current location- cochin, kerala(due to COVID19 I came todrop my family). Willing to relocate? -Yes

Passport - H5181726, B1/B2 USA Visa Holder Till 2027, L1-Visa till 2020. JOB PROFILE 1- Sr. Engineer- Instrumentation and controls. Honeywell Automation India limited (Dec 2015 to June 2020).

Honeywell International is a $39 billion diversified Fortune 100 leader with more than 130,000 employees in 100 countries around the world.

Performance Materials and Technologies is a high-performing, global business with an array of technologies that are changing the world for the better. We develop and manufacture advanced materials and process technologies used in a wide range of industries and applications, from petroleum refining to environmentally-friendlier refrigerants to bullet-resistant vests. Our advanced materials are critical in the manufacture of products ranging from nylon to chips to pharmaceutical packaging. International Project with Honeywell are the following.

DCS upgrade project, Honeywell Electronic Materials - Salt Lake City, UT.

Reactor Safeguard Project, Honeywell Electronic Materials - Salt Lake City, UT.

AS Built Dwg. preparation (Client: Honeywell, Geismar, Louisiana.).

CaCl2 Filter Press Upgradation. (Geismar, Louisiana)

Debottleneck Plant Expansion. (Shreveport, UOP)

Wax tank Emission Control project. (Honeywell Orange Texas)

CTFE ADLA project. (Honeywell Baton Rouge, LA)

Digester -II Project. (Honeywell Shreveport, UOP). Principal Responsibilities:

Manage and execution of the instrumentation & Control aspects of projects through front end engineering through Detailed design, Construction scope of work, control system integration /networking and FAT/SAT, commissioning and start-up.

Work with different discipline engineers,

with process team during P&ID development,

with instrument team during Instrument Index & I/O assignment document, loop drawings, interconnect block diagrams, marshalling cabinet wiring diagrams,

with Reliability/maintenance for existing I/O database,

with automation/control team for Design Basis-Automation/Controls, Architectural Block diagrams, BPCS and SIS specifications, SIS functions& Level Determinations, and Review of project documentation for front office quality analysis.

with project team for materials management and vendor coordination,

With FAT/SAT and commissioning team for attending Punch list respect to stake holders comments.

Assist in the development and implementation of a strategy that improves safety, quality, reliability, and process control.

lead detail design of instrumentation systems, including pneumatic instrumentation and controls.

Review of engineering drawings (Instrument Index and I/O Assignment, IPDS, Instrument Data sheets, Cable and conduit specifications, Cable schedule, Instrument Block diagrams, wiring and termination drawings, instrument installation drawings)

Involve in the BMS and Fire alarm systems implementation as part of Shv. Project. JOB PROFILE 2- Sr. Instrumentation Design Engineer.

Austren Automation & Control (02 Jan 2015 to 30 Nov 2015).

Austren Automation & control, the focus is to provide design& detail engineering service solutions to clients. We work on full cycle Projects, i.e. Designing, Detailing and Drafting. It has a team of more than 50 engineers who work on various engineering disciplines like: mathematical modelling, engineering design, process engineering, instrumentation and control engineering, Automation, data acquisition, material science etc. Projects Involved.

HABAN-II gas wellhead project in foundation field bus protocol, (Client: GALFAR)

FPSO Steam Generation Unit Module project, (Client: Aker Solutions).

.

JOB PROFILE 3- Asst. manger Design E&I

M E Energy Pvt Ltd (July 2012 to Jan 2015)

Comprehensive Solutions for EPCs to Increase Project Margins, Reduce Project Durations and Improve the Quality of Design of Instrument Deliverables. Offers consulting support to help EPCs increase efficiency, protect Intellectual Property, and minimize the number of applications and spread sheets required for engineering work processes. Total electrical instrument design and detailing of gas turbines, WHR-boilers, HWG, TF –heaters, burner skids. Etc

Projects Involved.

Gas turbine with WHRB CCPL 12 MW project for VVF-Mumbai – gas turbine - Turbomach generator. Allen Bradley DCS controller.

Gas turbine with WHRB CCPL 17.5 MW project for United Group Bangladesh– gas turbine -Wartsila generator. Allen Bradley programmable controller.

MCFL Mangalore, IOCL, Mangalore Refinery. -GAS turbine +WHRB, Yokogawa DCS

Hot Water Heat Recovery Unit at ALUCAN Packaging Ltd-Nigeria (Lagos),- WHR Boiler, PLC Allen Bradley

WHRU at BPCL Kochi and IOCL -Panipat, SRU, ARU. HONEYELL-DCS

Haldiram -Noida, WHRB on NG engine capacity 800KW-

TVS motor cycle –Hosur. -HWG-10lacs kcal/hr, relay logic panel.

Bosch India Ltd- Bangalore-HAG- 4,12000 kcal/Hr, Siemens SS4 200 PLC

KadimiSteels, Chennai– HWG 12lacs kcal/hr, Siemens S7-400 PLC.

Durr India ltd. – Ford Sanand- HWG ControlLogix with AB.

Dambler- Taikisha India. HWG Relay logic system. Principal Accountabilities:

Involved in the development of engineering drawings (Instrument Index, IPDS, Instrument Data sheets, Cable and conduit specifications, Cable schedule, Instrument Block diagrams, wiring and termination drawings, instrument installation drawings)

Inhouse Electrical cum Control panel assembling supervision.

Conducting Electrical & Instrument control panel FAT & SAT.

Actively involved in company ERP system implementation and setting of all instrument and standardization JOB PROFILE 4-Instrumentation Design Engineer

Callidus Technology India Pvt. Ltd. by honey well (UOP Honeywell) (Jan 2011 to Feb 2012)

It is a leading Design and Project engineering company for the Incinerators, Burners, Flare, Burner process control and EPC for oil and gas, refinery, Petro chemical and infrastructure sector both in India and Overseas. Project Involved:

SRU – Incinerator/Thermal oxidizer + WHRU Boiler at IOCL Panipat refinery & BPCL Kochi cochin refinery. Principal Accountabilities:

Responsible for dealing with End Customers includes BPCL, IOCL, Aker Solutions, EIL, LURGI, Govt. Dept/ Electrical consultants/System Integrator/Panel Builders /Trunkey Contractors - Manufacturers.

Preparation of Instrument I/O List, Schedules & Interconnection diagrams in IN Tools, Auto CAD Drawings (Hook up. Wiring diagrams, block diagrams).

Planning and Execution of Project Works.

JOB PROFILE 5: Jr. Instrumentation Engr.

Rohini Industrial Electricals Ltd by Voltas group (Jan-2010 to Dec 2010)

RIEL is Engineering, Procurement & Construction contracting company well established and operating in India providing detailed engineering, construction, commissioning, and operation and maintenance services to Oil & Gas & Petrochemical sectors in India.

Projects Involved

New DHDS/CEMP project in Cochin refinery (NHT/CCR, VGO HDS, and SRU).

BCPL cochin refinery – Tail gas incineration unit. Responsibilities

Involved in planning, Supervision of Erection, Execution of orders, Site Execution, calibration of instruments Troubleshooting.

Calibration &erection of both Foundation Field Bus & HART instruments.

Loop Testing.

JOB PROFILE 6: Jr. Design Engr.

Accurate instrumentation & Control Engineering (April 2009 to Oct 2009)

AICE is Design Engineering contracting company well established and operating in Kerala providing Technical solutions, detailed engineering, Calibration and services to Oil well & Gas & Petrochemical sectors FOR PDO. Projects Involved

HABAN-I gas wellhead project in foundation field bus protocol (Client: Petroleum Development Oman) for GALFAR.

Green dome petrochemicals (Client: Oman chemicals & pharmaceuticals LTD.)

ETP (Effluent Treatment Plant)–Project for Chopper Electro-Plating Unit Indian Navy-Cochin.

Thermocouples installation in Bellows (client: ORPC- Oman Refineries and Petrochemicals Company) Principal Accountabilities:

Involved in the development of engineering drawings (Instrument Index, IPDS, Instrument Data sheets, Cable and conduit specifications, Cable schedule, Instrument Block diagrams, wiring and termination drawings, instrument installation drawings)

TRAININGS UNDERGONE

Implant training in TCC, Kerala, India.

Completed health safety Course for oil & gas.

Completed Rockwell’s midrange PLC training.

EXTRA CURRICULAR ACTIVITIES

Cooperate Club member–Toastmaster Club of pune west.

National cadet corps (NCC) in koratty government Polytechnic College.

Nation service scheme coordinator.

Movies, browsing, driving, swimming.

PERSONAL PARTICULARS:

Date of birth: 19/12/1984. Age: 35yrs Permanent address Gender: Male Blood group: AB+ F2-706, Nyati Elan West-1 Marital status: Married. Religion: Hindu. Bakori road,Wagholi, Nationality: Indian. Passport#: H5181726 pune, Maharashtra-412207 Alt. No: +91-992*******

Declaration.

I hereby declare that the information furnished above is true to the best of my knowledge. Station: Pune

Date: Prajeesh T.V

Contact this candidate