ANTANIOS NADDOUR, PEng. Electrical Engineer

***–1966 Main Street West, Hamilton, ON. L8S 1J6, Canada.

E-mail: adf0mo@r.postjobfree.com

+1-905-***-****

I am a hardworking, hands-on qualified and experienced electrical engineer with over 30 years of practical engineering experience. I worked as a lead/senior EE, section head and consultant in oil and gas fields and gas plants, industrial and electromechanical construction projects, power generation, distribution and transmission; operation and maintenance, commissioning, start up, and support.

In oil fields and gas fields and gas plants I worked as a lead/senior electrical engineer-consultant, and senior power plant supervisor (Plants with Solar and GE gas Turbine generators). In 1992 I was appointed as an oil field electrical section head by Shell. From 2006- 20015 I worked as a lead and senior EE, consultant in oil and gas and consulting companies, including the largest gas plant in Nigeria, take part in review and verification of construction and design of the strategic, more than 400 KM, pipe line in UAE- operated by ADCO. In 2014- 2015 I worked as a senior EE in Oil and Gas construction project with AMEC-FW(with Shell), Iraq. I take key role in reviewing, revising, and approving drawings, specifications, material, FAT, QC/QA, BOQs, installations(oil and gas, industrial, strategic water pumping station-Kuwait, commercial, and residential), besides installations, commissioning, supervision, control, operation, and maintenance of MV generation plants, substations, big motors and control centers, pumps, boilers, chillers, compressors, direct current systems: rectifiers, UPS, variable speed control circuits, and HVAC. I have long experience in design, research, training, and development. I used ETAP for a few years. Also I have marine experience.

I am a Canadian citizen, hold master’s degrees, completed all PHD courses at McMaster university, Ontario, Canada. Besides, I am a PEng, member of PEO- Professional Engineering of Ontario, Canada. Also I hold Ontario construction and maintenance electrician certificate, and WHMIS. I was a member of IEEE, and other Engineering societies such as Kuwait Society of Engineering (Consultant Designation), and hold electrical engineering supervisory designation- Ministry of Energy, Kuwait.

I am enthusiastic and efficient with excellent problem-solving and decisions skills, team player, enjoy and I am skilled at managing staff, working with senior management collaboratively and ensuring that projects are completed efficiently within deadlines and financial constraints, while the highest level of engineering standards, quality, and safety are assured. I have worked professionally and studied in several countries.

I enclose a review of my professional history. I hope this provides you with a clear indication of the work ethic, sense of responsibility and commitment to excellence that I would bring to any organization and project.

I would very much appreciate an opportunity to discuss my professional history and career goals with you if we might find a mutually convenient time. Thank you for your time and consideration.

Sincerely

Antonio’s Naddour, MS-EE. PEng.

ANTANIOS NADDOUR, PEng. Electrical Engineer

902–1966 Main Street West, Hamilton, ON. L8S 1J6, Canada.

E-mail: adf0mo@r.postjobfree.com

+1-905-***-****

HIGHLIGHTS OF SKILLS

CONSTRUCTION PROJECTS, OIL& GAS, FIELDS, MANAGEMENT

Lead/Senior EE, consultant and section head in consulting companies, oil and gas fields, plants, and large electromechanical projects (residential commercial, recreational, infrastructure and industrial).

Thrive in bringing projects to successful completion within budgets, quality, deadlines, and in compliance with national and international applicable standards, codes, and regulations.

Attended and headed multiple professional meetings with companies, organizations managers and stakeholders.

Professional, respectful, and admirable relationship with higher management, colleagues, subordinates, stakeholders and public.

Increased profitability through organizing, planning, diligence, commitment and goal orientation.

Lead by example and knowledge, team member and team player with extensive experience with people with multicultural backgrounds. Worked in multinational and international companies.

Professionally and efficiently dealt with consulting firms, ministries, professional organizations, contractors, vendors, suppliers, and subcontractors.

POWER GENERATION AND DISTRIBUTION

Experienced in supervising electrical engineering construction projects, reviewing drawings BOQ, and specifications, with strong background in power engineering and system analysis

Experienced in supervising installation, testing, commissioning, operation, and maintenance

of generators, transformers, protective system and switchgear

skillfully dealt with consulting firms, government ministries contractors, and subcontractors.

Experienced in troubleshooting and maintenance of switchgear, generators, transformers, UPS, and rectifiers

ELECTRICAL MOTORS AND MOTOR CONTROL CENTERS

Strong background in electrical machines and motors

Skilled in designing, installation, operation, testing and commissioning of MCC control centers and protection circuits

Experienced in operating, troubleshooting and maintenance of industrial motor control centers (MCC) and switchgear

TRAINING AND DEVELOPMENT

Successful trained and instructed in universities and companies, Attended IEEE conference

Guided and performed electrical engineering research work, presentations and seminars

Taught ETAP for university students

Awarded the Best Applied Research Award for 1998, from The Regional Committee for High Voltage Electric Systems of the Gulf Council Countries (GCC-Cigree)

PROFESSIONAL EXPERIENCE

Lead/Sr. EE, Section Head, JPKenny (Wood group- UAE); NJS consultants(Kuwait AMECFW and Self-Employment, 2012- March 2020

Responsible for reviewing, confirmation and approving of electrical design, electrical equipment, protection, specifications, sizing calculations, and BQs for: generators, transformers, cables, UPS systems procedures for installation, construction, and installation of electrical power system and equipment for a major oil pipeline, oil pumping stations, overhead lines, power transformers up to 25 MVA, 33/6.6 KV, 6.6/0.415 KV, VSD systems up to 8 MVA, motors 6.8 MW, etc.

Reviewing power system studies; verifying protection, installations, earthling of equipment, Haz. Areas classification and drawings in residential, commercial, recreational, infrastructure and industrial projects.

Reviewing and approving design, material, installations, etc. in a strategic fresh water pump stations and oil and gas projects with 11 KV emergency generators, motors, VFD, and transformers, etc.

Review and conformation of major electrical equipment, protection, specifications, and sizing calculations for: generators, transformers, cables, and UPS systems sizing and procedures for installation including the overhead line. Review power system studies, verify earthing of equipment. Review Haz. Area classification, schedule and drawings

Senior Power Gas Plant Engineer, Senior power Gas Plant Sup. NAOC (ENI group, Nigeria), and Self Employment, 08/2007- 01/2012

Fully responsible for the whole electrical power system: generation and distribution system in the biggest gas plant in Nigeria with11 KV, 6 KV, and 400 V generators, transformers, motors, 33 KV transmission lines, switch gear, MCC, UPS and DC systems.

Reviewing and approving new installations, troubleshooting and maintenance jobs done by contractors.

SENIOR Electrical Engineer-Consultant: Gulf Consultants (Kuwait), Kuwait Development Co (Project Management- Kuwait), INA-Naftaplain, 2004- 2007

Fully responsible for reviewing and approving project electrical drawings, installation methods, and materials for big pumping stations

Reviewing, approving project drawings, BOQ, specifications, check lists, and supervising all electrical installation, including MV and LV motors(up to 1.5 MW, 3.3 KV motors with VFD), generators up to 11 KV- 3 MVA, transformers, direct current systems, rectifiers, and UPS in oil and gas fields, residential, and commercial projects

Oil Field Electrical Eng, Electrical Section Head, Construction Projects Engineer-Section Head, Al-Furat Petroleum Co.(with Shell); United Gulf Construction Co, Middle East, 01/1990-05/1996

Successfully involved in installation, commissioning, operation and maintenance of generators, transformers, transmission lines, switchgear, protection systems, 2000 HP motor control centers (MCCs), pumps, HVAC, cathodic protection, direct current systems, rectifiers, and UPS

Received excellent performance evaluations; promoted to Oil Field-Electrical Section Head

Worked collaboratively with senior supervisors on the oil fields in often hazardous areas

Ensured that routine troubleshooting and on site modifications were completed successfully

Section head, responsible for installation, operation, maintenance, and troubleshooting of generators, electrical motors, transformers, and pumps according to specifications

Managed and supervised up 50 electromechanical professional in up to $ 70 million projects

Worked closely and collaboratively on all phases of projects with ministry engineers, consulting companies engineers, project managers, financial and technical support and supply managers

Achieved consistent success in completing and commissioning projects before deadlines and within budgets with high quality as a result of organizational excellence and commitment

Electrical Engineer, PHD Candidate, Instructor, McMaster University, ECE Dept., Hamilton,

Ontario, Canada 2001- 2003

Completed all required PHD electrical engineering courses (Poly-phase Electric Motors, Power Electronics, Transmission Lines, CAD, and Advanced Engineering Electromagnetics)

Conducted research work, and attended many graduate presentations and seminars

Laboratory instructor and TA for: Power devices and Systems, Energy Systems and Management, Power Electronics, Electrical Circuits and Power

Electrical Engineer, Instructor, Kuwait University, ECE Department, 1997-2001

Instructed in electrical power systems, machine, electric circuits and FORTRAN laboratories

Provided teaching assistance for courses: power system analysis (load flow, short circuit, transient stability, economic dispatch, power generation, transmission and distribution analysis), electric circuits analysis and linear circuits, electric machines, distribution, and power system protection

Conducted and supervised research work Prepared new power and FORTRAN lab experiments

Attended IEEE conferences

EDUCATION

PHD Candidate, Electrical Eng., McMaster University, Hamilton, ON, Canada, 2001- 2003

Master of Electrical Power Engineering, Kuwait University, Kuwait, 1993 -1996

MS in Electromechanical Engineering, USSR, 1970 -1975

Academic credentials were evaluated by University of Toronto, Comparative Education Office, and determined to be equivalent to Canadian graduate degrees.

OTHER RELEVANT INFORMATION

COMPUTER SKILLS

ETAP, Matlab, Spice, Economic Dispatch, MS Word, Excel, Fortran, Canvas, C- language, etc.

AFFILIATIONS

PEng. Member of PEO- Professional Engineering of Ontario, Canada

IEEE- previous student member, needs reinstatement

Member with Consultant designation -Kuwait Society of Engineers,

Hold Electrical engineering supervisory designation, Ministry of Energy, electricity, Kuwait.

LANGUAGE SKILLS

English (BA English Language and Literature), little French

AWARDS

Best Applied Research award for 1998,

“A Study on the Substation Application Curves of a Distribution Network” The Regional Committee for High Voltage Electric Systems of the Gulf Council Countries

(GCC-Cigree)

Contact this candidate