Vyshak C

Cholayil House, Mannur Post, Palakkad District, Kerala-678642, India

Phone: 009***********, 009***********

Email :adeunh@r.postjobfree.com,adeunh@r.postjobfree.com

Career Objective & Abstract

To gain international experience and widen my knowledge in instrumentation field while gaining recognition as reliable and thorough professional in the field.

Presently associated with Abu Dhabi National Oil Company (ADNOC OFFSHORE) on contract for the past 6 years as Instrument Technician (Offshore) in Zakum Oil Field.

Bachelor of Technology (Instrumentation & Control) qualified engineer with 9 years of rich experience in Maintenance, Commissioning & Start-Up, and Project Management in Upstream/Downstream Oil & Gas Sector.

6 years of Offshore Experience in Instrumentation Maintenance & Commissioning.

Core Competencies

Team Management Planning and Execution Site Coordination

Eye for details Engineering Documentation

Proficient in the engineering of equipment, grasping of new technical concepts quickly, utilizing the same in a productive manner within the stipulated time.

A keen planner with expertise in handling of projects as well as the maintenance of live offshore platforms by execution of preventive/corrective maintenance procedures.

Professional Experience

Abu-Dhabi National Oil Company, Abu Dhabi, UAE Since December-2013

www.adnoc.com

Company Profile: Oil & Gas Producer

Designation: Instrument Technician

Site Responsibilities

Hands on experience in maintenance of various process platforms, well head towers as well as commissioning/start-up of new platforms across Zakum Oil Field.

Instrumentation & Control

Involved in Commissioning/Start-up/Maintenance of Gas Injection Trains, Gas gathering/ processing platforms, Water Injection Clusters, Collector Separator & Riser Platforms, Pumping platforms, Power Generation Platforms, well head towers.

Hands-on experience in commissioning & maintenance activities of Gas Turbines & Anti Surge Control System (Rolls-royce Avon, Solar Turbines).

Carry out preventive/corrective maintenance for air compressor packages, chemical injection skids, well head control panels, DCS (Yokogawa Centum VP) & ESD (Prosafe-RS) systems, F & G instruments & control systems, Siemens & Allen Bradley PLC’s.

Maintains and improves plant reliability through identifying/correcting bad actors, conducting root cause failure analyses, and implementing preventive /predictive maintenance programs

Fault rectification of field instrument and control system logic modification if required.

Planned and implemented Preventive maintenance schedules for Field instruments, Programmable Logic Controller’s and Yokogawa Distributed Control Systems.

Participate in technical evaluations of the instrumentation performance and reliability by monitoring and analysing the DCS Alarm Management data, operational data, preventive and unscheduled maintenance records and process trends to recommend changes as appropriate in maintenance standards and procedures.

Prepare preventive maintenance procedure for inspection of instruments under both idle and/or operating conditions, specifying the frequency for inspecting each item.

Support Operations and Maintenance during planned commissioning, startup, emergency and shutdown activities.

Installation, testing and commissioning of wellhead control panels for oil and gas production wells, water injection wells, gas injection/gas lift wells.

Loop checks & Function testing of Pneumatic and Hydraulic Control Valves, and MOV’s.

Maintain records of calibration, inspection and test equipment’s.

Trouble shooting of equipment operation, co-ordination required to perform dynamic tests and performance test to various systems with vendors and other involved parties.

Support to Maintenance team for improving and optimizing the maintenance practices.

Project Management

Monitor/Witness the Pre-Commissioning, commissioning and tie-in activities of new platforms.

Organize weekly review meetings with the contractor to discuss about progress achieved.

Review and close out of Punch List items, Site Queries and Technical Verification lists as per the project requirements.

Co-ordinate with Vendors, sub-contractors and other discipline engineers.

Ensuring the commissioning activities are not interrupting the existing plant facilities.

Ensure that all activities are carried out safely and in accordance with Permit to work system.

Conducting day to day jobs in accordance with safety rules in the Oil & Gas industry.

Preparing and arranging all types of Electrical/Instrument Work Permits for green/brown field.

Monitor work Progress and prepare regular reports to the Maintenance/Commissioning Manager.

Quality Assurance & Safety

Comply with conditions & precautions mentioned in Permit to Work System.

Preparing and arranging all types of Electrical/Instrument Work Permits for green/brown field.

Conversant in hazardous areas and international standards like API, ANSI/ASME, BS, NEC/IEC etc.

Work as QHSE focal point for the work and to develop an emergency response plan in the event of any HSE incident.

Participates & ensures that site execution Teams carry out risk assessments, STOP, toolbox meetings prior to maintenance/commissioning activities are conducted with appropriate attendance at these reviews.

National Petroleum Construction Company, Abu Dhabi, UAE Sep2013-Nov2013

www.npcc.ae

Company Profile: EPC Contractor

Designation: Electronics Technician

Site Responsibilities

On-site coordination of Loop checks/ Functional checks and preparing the loop folders as well.

Calibration of HART and FF transmitters using HART communicator.

Installation/Commissioning of vibration monitoring system(Bently Nevada-3500 series)

Review the vendor activity plans, schedules and other relevant documents.

PLCs programming using ladder logic & FBDs.

Commissioning & Maintenance of Remote Telemetry Unit (RTU-Weatherford CS7X).

Review the P&ID, instrument index, specifications and data sheet for field instruments such as flow / level / pressure / temperature instruments, control/on-off/safety valves during the construction period.

Review of Hydraulic System Drawings, schematic drawings, cause & effect diagram.

Ampersand Systems Private Ltd. Jan2013-Jun2013

www.ampersandsystems.in

Company Profile: EPC Contractor

Designation: Instrument Engineer

Site Responsibilities

Involved in handling manpower of 30 including a team of fitters & technicians to execute following construction activities.

JB Frame fabrication and erection.

Control panel base frame fabrication and erection

Panel erection and alignment.

Laying of main and branch cables as per schedule.

Glanding and termination of all cables to the instruments Junction boxes, and panel, according to the schedule.

On site coordination for instrument installation & loop Checking.

Review the design deliverables during the various stages of project execution.

Provide the technical inputs for P&ID, PFD, Cause & Effect Charts, Control Philosophy, operation/ shutdown/maintenance procedures and Operation Test Procedures (OTP).

Prepare As built/red mark-up drawings as per site conditions.

Participates & ensures that site execution Teams carry out risk assessments, STOP, toolbox meetings prior to commissioning activities are conducted with appropriate attendance at these reviews.

Planning, tracking & implementation of project plans within present budgets and deadlines.

Organize weekly review meetings with the client to discuss about progress achieved.

Managing the materials handling, storing and preservation.

Autocal Solutions Pvt. ltd Jul2011-Aug2012

www.autocal.net

Company Profile: Maintenance, Calibration & Testing

Designation: Junior Instrument Engineer

Site Responsibilities: Involved in leading a team of technicians as well as hands on experience in Maintenance, Shutdown, Calibration & Testing activities.

Loop checks and Functional checks for field instruments and control systems (including pump logics).

Provide the technical guidance to the design draftsman in-order to prepare the As-Built.

Providing the technical assistance to the Operator, during the initial stage of operation.

Involved in commissioning activities for Chemical Injection Skids, Instrument air package, Nitrogen generation package etc.

Coordinate with client operations team during various phases of shutdown activities.

Carry out inspection for Leak test for impulse line, Insulation resistance test /continuity test for instrument cables.

Carry out inspection for installation of Transmitters, Loop power indicators, Hand switches

Maintain history record of each instrument and special record for critical ones.

Handled installation of both RTD & Thermocouple type temperature element and cable laying for the same

Installation of field instrument like transmitters, gauges, valves etc.

Erection and on-site Configuration and calibration of Analysers, Flow Meters.

Preparing of Bill of Material (BOM) and Material approvals.

Carry out the troubleshooting of field instrument as per the vendor recommendations.

Educational Profile

Bachelor of Technology in Instrumentation & Control Engineering, from NSS College of Engineering, Palakkad, University of Calicut, India, June2007-june2011.

Higher Secondary from CBSE, India, May 2005-May 2007.

Matriculation from CBSE, India, March 2004-March 2005.

Certifications

Advanced training in Industrial Automation from Technocrat Automation chennai.

IELTS aggregate score of 7.5(R-8.5,W-6.5,S-6.5,L-8.5).

Offshore sea survival TBOSIET Certification from ETSDC Abudhabi.

Certificate No: 00585501151216109355, OPITO Approved

Expiry: 14/12/2020

Projects Handled

Worked in Phase3 Expansion Project WHT’s Zakum Field, Abu Dhabi

Worked in 100MBD Zakum Central Project, Abu Dhabi

Worked in Instrument Air System replacement project, Zakum Central, Abu Dhabi

Worked in Control Systems modification for existing Gas Turbines project, Zakum West, Abu Dhabi

Worked in Manglore Refineries and Petrochemicals (MRPL) project.

References

Mr. Nadeer Ms, Senior Manager, Ms Al Kunaiby Employment Services, Abu Dhabi, UAE

Contact this candidate