USMAN ARSHAD

Asst. Engineer Fire Protection System

Email: adeo9g@r.postjobfree.com

Contact Number: +971-*********

+92-331*******

Usman Arshad

Email:adeo9g@r.postjobfree.com /Mob: +971-*********

PROFILE SYNOPSIS

Instrument & Fire Protection System Engineer with 10 years of experience in instrumentation, Fire Alarm, Fire Suppression, Fire Fighting, Gas Monitoring, Public Address System and CCTV System installations and maintenance.

Hardware Installation of various fire & gas alarm panels like Simplex, Notifier, Potter, Fast-2000, MX-Minerva, How, Edward, Honeywell, Drager and General Monitor (Conventional & Addressable).

Troubleshooting and Hardware Installation of PLC, DCS, TMR, RTU and SCADA systems.

Cable tray, conduit, trench installation, cable IR & continuity test and cable termination.

Extensively experienced in Installation of Inergen, Argonite, CO2, N2-100, First Aid Rim Seal, FM-200, Novec and Kitchen Hood System.

Installation, Service, Inspection, and Maintenance of All Fixed and Portable Fire Fighting System like Fire water pumps (Jockey, Electric, and Diesel), Deluge Skids, Sprinkler System, Water Mist System, CO2 System, Foam System, DCP System.

Fire alarm prepared the BOQ design checking and Quotation.

CAREER CONTOUR

Asst. Engineer Fire Protection System DEWA (Dubai Electricity & Water Authority)

(2018 – Present) Dubai, UAE

At Dubai Electricity & Water Authority, I am working on Overhauling, Preventive Maintenance, Corrective Maintenance, Calibration and Troubleshooting of all field Fire Alarm System, Fire Suppression System, Fire Fighting System, Gas Detection System, Foam & Water Spray System, Linear Heat Detector for all High Voltage Cables Protection, VESDA System, Deluge Skids and Water Mist Spray System.

Maintenance of Fire Protection System all over the Dubai High, Medium and Low Voltage Substations (400KV, 132KV, 33KV, 11KV) of Dubai Electricity & Water Authority.

Fire Protection& Gas Alarm Supervisor Gulf Industrial Services Company

(2016 – 2018) GASCO (Abu Dhabi National Gas Industries Ltd)

In this plant I am working on Overhauling, Preventive Maintenance, Corrective Maintenance, Calibration and Troubleshooting of all process Instruments, Fire Alarm System, Fire Suppression System, Firefighting System, Gas Monitoring System, Foam & Water Spray System, Linear Heat Detector for all fuel storage Tanks, VESDA System, CF3I System and Deluge Skids.

Key Result Areas

Involved in:

Planning and establishing general & individual procedure for the field inspections for each work category.

Conducting pre-inspections and inspections as required with all party concerned.

Raising punch list for all faults found which are not as per standards and specification of projects.

Commissioning of instruments, loop checking from field to Substations, Instrument shelters and Control Room.

Fire Protection & Gas Alarm Supervisor Gulf Coast Electromechanical Co. WLL

(2014 – 2016) Takreer (Abu Dhabi National Oil Refinery)

Worked on Overhauling, Preventive Maintenance, Corrective Maintenance, Calibration and Troubleshooting of all process Instruments, Fire Alarm System, Fire Suppression System, Gas Monitoring System, Foam & Water Spray System, CCTV System, Linear Heat Detector for all fuel storage Tanks, Public Address System, VESDA System, CF3I System, Deluge Skids and Performance testing of Fire Water Pumps (Jockey, Diesel and Electric).

Projects:

Installation and Maintenance of Fire& Gas Alarm system at Musaffah Supply Division.

Installation and Maintenance of Fire& Gas Alarm system at RTUs & Pipelines.

Installation and Maintenance of Fire& Gas Alarm system at Abu Dhabi Refinery.

Maintenance of Fire& Gas Alarm system at Petroleum Institute.

Asst. Engineer Instrument & Fire Alarm Engro Corporation

(2010 – 2014) Muridke, Pakistan

•Worked on Commissioning, start-up and Maintenance of 65 bar, 30 TPH Boiler, 4 MW Steam Turbine, Reverse Osmosis Facility, Cooling Tower and Effluent Treatment Plant. Supervision and execution of cable lying from Instrument to cards, Instrument Installation according to P&ID drawings, Cold and Hot loop verification.

• During start-up phase Troubleshooting and Calibration of Transmitters, Switches, Control Valves and other instruments.

•Also worked on Installation, Commissioning and Maintenance of Cleaning, Drying, Parboiling and all other Processing, Packing Machines Equipment Instruments.

•Worked on Installation Commissioning, Troubleshooting and maintenance of Fire Alarm and Extinguishing System.

Sr. Instrument & Fire Alarm Technician Flying Paper Industries

(2008 – 2010) Lahore Road, Pakistan

•It was my Entry level in my own field and I got the best experience of Troubleshooting and Maintenance of all process Instruments (Pneumatic, Electronic and Electrical). I gain all principals of Electrical, Electronics and instrumentation by practically in this industry.

Responsibilities and Job Descriptions

INSTRUMENTATION AND CONTROL SYSTEM:

•Worked on DCS System Honeywell TDC-3000 and Foxboro Installation Troubleshooting and Maintenance.

•Worked on PLC System Siemens SIMATIC S7-300, Allen Bradly and Triconex Installation Troubleshooting and Maintenance.

•Troubleshooting and Working experience of Vibration Monitoring System (Bentley Nevada 3500) Vibration & Thrust monitoring system with vibration Probes & Proximitties.

•Maintenance and Troubleshooting of Enraf Tank Level Gauging System.

•Level Gauges Glass Level Gauge (GLG) and Magnetic float type by KROHNE.

•Maintenance of Coriolis type flow metering system by Emerson and Flow measuring elements e.g. Orifice plate, Venturi tube, Annubar Flow Nozzle, Vortex Flow Meter, Coriolis Flow Meter and Magnetic Flow Meter.

•Calibration, Troubleshooting, Lapping, Hydro testing, Maintenance and Servicing of different type control valves by Mitsubishi, Samson, Spirex Sarco, Koso, Valtek, Flowserve, Fisher, ABB, SMC and Siemens.

•Calibration, Troubleshooting and Maintenance of pH, Conductivity and Oxygen Analyzers by JESCO and Endress + Hauser.

•Testing, Inspection, Troubleshooting and fault rectification of Temperature Transmitter, RTDs and Thermocouples, Installation of Thermowells, Bimetallic Temperature Gauges, Liquid Filled type Instruments, Thermistor by Siemens and Wooju Sensors.

•Troubleshooting and Maintenance of Rotary Level Switches, Proximity and magnetic type and all other Switches (Level, Pressure, Temperature, Capacitance and Speed) by ifm electronics, Bin Master, Danfoss, Rexroth, Airtec, Fanico, Sor, CCS, Asco, Delta and Magnetrol.

•Troubleshooting and Maintenance of Speed Switches of Elevators by IFM Electronics.

•Maintenance of SAFE GRAIN Temperature Monitoring and Controlling System (USA).

•Calibration and error removing of Pressure Gauges and Installation of Syphon’s, snubbers and diaphragm chamber with oil filled chamber (Standard, Compound, Vacuum Gauges and Differential Pressure) by Wika, Budenberg, Wise and Festo.

•Maintenance work of SOVs, Limit Switches, Pneumatic Cylinders and Pneumatic Regulators by FESTO, ASCO, WISE and WIKA.

•Calibration of different Transmitters by Honeywell, E & H, Rosemount, Siemens and Yokogawa.

•Calibrations, Troubleshooting and Maintenance of Weighing Scale, MSDG-140, MSDL-120, Flow Balancer, Packing Machines and Metal Detectors by Buhler, Rehoo, Fortress and Sbecer.

•Maintenance and Troubleshooting of different type of Rice Processing Machines.

•Participation in main activities of Husk Boiler Commissioning.

•All field and panels Termination, Commissioning and testing work.

FIRE & GAS SYSTEM:

•Perform Preventive Maintenance, Corrective Maintenance, Installation and Testing of Early Warning System for Fire Detection System by AFA-Minerva, Wormald, NT-100, Simplex, Cerberus Pyrotronics, How, Gent by Honeywell, Tyco and Discovery.

• Perform Preventive Maintenance, Corrective Maintenance, Installation and Testing of Fire Suppression System and Kitchen Hood System by TELECTRON (Kidde Fenwalnet 6000), ANSUL, Tyco, Gent by Honeywell and Siemens (Inergen, Argonite, CO2, N2, FM-200, NOVEC, First Aid Rim Seal and Wet Chemical).

•Perform scheduled Preventive, Corrective Maintenance, Installation and Testing of Gas Detection System (H2S, SO2, HC, H2, O2) by General Monitors, Honeywell, Drager, Notifier and Sensitron.

•Installation, Maintenance and Troubleshooting of Linear Heat Detector for all fuel storage Tanks, Vessels and Pumps by Tyco, Safe and Protectow Fire Systems.

•Perform Schedule Preventive Maintenance, Corrective Maintenance and Troubleshooting of all Fire Water and Foam Deluge Skids Instruments by Tyco and Silvani.

•Water Mist Spray System by Aqua Pro.

•Installation, Maintenance and Troubleshooting of Very Early Smoke Detection Apparatus (VESDA, HSSD) by Vision Systems (Xtrails).

•Installation, Maintenance and Troubleshooting of First Aid Rim Seal System by Saval Bv.

•Perform periodic checkup of Public Address (PA) System on schedule Preventive Maintenance and Troubleshooting by Merlaud and Federal Signal.

•Testing of Deluge Skids Quarterly with complete operation as well as testing of each and every device related to skids.

•Performance testing of Fire Water Pumps (Jockey, Diesel and Electric) Nijhuis Norit and Caterpillar.

•Auto/Manual system checking for suppression system daily.

•Maintain the spares and PPEs.

•Daily round of all system panels, HMI and MIMIC panels at Control Room and Fire Station.

ACADEMIC CREDENTIALS

Bachelor of Technology with specialization in Electronics

From: Preston University Lahore

Diploma of Instrumentation Engineering

From: Sweedish Pakistani Institute of Technology Gujrat

Matriculation in Science

From: Jinnah Grammer Model High School Gujrat

TRAININGS&CERTIFICATIONS

TRANCO Approved CP

First aid Training with CPR & AED

Qualified permit Applicant & Receiver for Oil & Gas Permit-to-Work System

Tubing and Compression Fitting

SCABA training

Work to permit procedure

LOTO Procedure

IT & OTHER SKILLS

Microsoft Word

Microsoft Excel

Microsoft PowerPoint

Outlook, SAP, TMS & DMS

Skilled to read engineering drawings, ILD, Schematic, Single line, P&ID, PLC, DCS & Hook up drawings.

Specialist in installation & calibration of different types of modern electronics & pneumatic instrument.

Well-known with the plant running, predictive, preventive, breakdown and corrective maintenance.

Participation in emergency drills, hazard analysis, safety meetings, tool box talk. Task risk assessment (TRA), incident and near miss reporting, raising work permit.

PERSONAL DOSSIER

Father’s Name : Raja Muhammad Arshad

Date of Birth : 13-08-1986

Religion : Islam

Marital Status : Single

Languages : English, Urdu, Punjabi and Hindi

Address : Banniyas, Abu Dhabi, UAE

Driving License No : 2346448 (Abu Dhabi, UAE)

Contact this candidate