Profile

I am hereby Ramesh Muniandy

from Malaysia would like apply for the

related position. Thank you for reading

My CV and for the time you consider

on this matter. Thank you for view

i had work as electrical & instrument

supervisor to electrical & instrument qc

inspector in Oil & Gas for more than

20 years. My job mostly on supervision

& inspection on cable pulling for high

voltage & low voltage, installation of

DB, Junction box, Street lighting,

installation of instrument equipment

panels, transmitters, fire & gas

equipment, Arrange with the client to

do the final inspection, clear the punch

list before handover according to

category and done for the final touch

up before handover to the client.

Apart from my technical skills, I

am reliable, trustworthy, and punctual;

and in particular, I take pride in the

quality of my customer service. Much

of the work I did for my previous

company came through client referrals,

and I will bring the same standard of

service and professionalism to yours. I

also have experience leading small

teams on larger operations, and

working as a team. I am committed to

the highest standards of electrical

safety and operational protocol, and I

am fully up to date on all OSHA

Please find my contact information on

this letter and in my enclosed resume.

Your Co-operation highly appreciated

RAMESH MUNIANDY

E & I Quality Control Inspector

EDUCATION

1983-1986: Sekolah Menengah Rendah Lukut. Finish SPM 1987-1989: Workers Institute of Technology. Completed ELECTRICAL and MECHANICAL

1988-1989: Perak Institute of Electronic. Finish Basic Electronic Tech (Part time)

SKILLS

TRAINING AND SEMINAR ATTENDED

CIDB

OGSP LEVEL 1

CONFINED SPACE

Working on Height training

Permit To Work training

OVERALL RESPONSIBILITIES ON JOB:

Ensure that inspection are performed in untimely manner and recorded as per specification and Standard detail drawing, Inspection Test Plan (ITP) and

Procedure requirement.

Ensure approve method and material are being use & conform to specification.

Supervised the work carried out to ensure the request are carried out accordingly with IFC (Issued for

Contact

Phone:

+968******** Oman

+601******** Malaysia

Address:

No 30 Jalan 1/17 Bandar Spring

Hill,71100 Port, Dickson, Negeri

Sembilan. Malaysia .

Email:

adea6i@r.postjobfree.com

WORK EXPERIENCE

(1990-1993)

Worked with BHARAT HEAVY

ELECTRICAL LIMITED INDIA,

TAIYEI DENGKO KAISA

JAPAN, & GE INDUSTRIAL

SYSTEM.

Construction) drawing based on the latest drawing.

Performed a Planning, Arrangement, Inspection and Monitoring for Electrical and Instrument activity by contractor.

Supervised the Inspection and monitoring quality of work, product and equipment functionality to compliant client requirement by testing and measuring representing Electrical & Instrument (E&I) discipline i.e. Lighting, Power cable, Junction box, Pressure / Flow transmitter, Orifices plate and IR Flame detector, Flare Ignition and ETC.

Responsible for monitoring and inspection the Instrument Installation, Cable Pulling / glanding / Termination, and Continuity / Insulation Resistant Test.

Monitoring, Raise, Follow up, cleared and closed all Inspection Test Reports (ITR) and the punch list which is outstanding and made accomplishment with progress result.

Follow up with vendor on SAT & FAT.

Job function:

Technician

Executing Power System in laying cable, Glanding termination of high voltage and low voltage cable, lay cable tray, cable ladder, trunking, conduit, Installation of control panel, 415v Distribution Board and lightning arrester.

(1993-1998)

Worked with SKF BEARING.

(1998-2003)

Worked with LIAN NGOI

ELECTRICAL

CONTRACTOR, SINGAPORE

Job function:

Section Leader

Production of Ball Bearing. Arrange the manpower to do the maintenance, follow the specification according to the requirement of Client. Daily reporting to

management for the target of production.

Job function:

Electrical Supervisor

Installation of Mobile Telecommunication System Base Station, Laying RF cable.

Power cable, install cable tray cable ladder, install CCTV.

Manage to finished 70 site In Singapore and 40 site in Philippine

(2004-2006)

Worked with RANHILL

PETRONEEDS, SPM

ENERGY, MUHIBAH

PETROCHEMICAL

ENGINEERING

Project: At Republic of Sudan

Mala oil field, Tharjath &

oilfield, Pallouge

(2007-2008)

Worked in “SHANGRI LA

HOTEL” SINGAPORE

(2009-6month)

Work With SINBERY Electrical

Project :BIODIESEL OIL & GAS

PLANT, ASSAR CHEMICAL DUA

SDN BHD KUCHING,

SARAWAK

Job function:

E & I QC Inspector

Installation Of DCS Panel, Esd Panel, Console Panel, Analyzer, Pressure Transmitter, Differential Transmitter, Positive Displacement Meter, Level Transmitter, Flow Transmitter, Shut Down Valve, Solenoid Valve, Level Gauge, Pressure Gauge, Heater Panel, Thermocouple, Solar System.

Lay cable ladder, cable tray, Glanding termination for instrument and electrical cables.

Issuing the Punch list of construction work to the contractor. Daily reporting the progress to management.

Job Function

Technical Officer

Supervise electrical faulty for all the Guest Room.

Job function

E&I QC Inspector

Conduct Safety Briefing and Supervising the new site erection for Electrical & Instrument.

Exposed to the fabrication and installation works in the Electrical and Instrumentation discipline such as support cable & tubing routine, Switchgear, Distribution Board, Battery Charger/ Bank, Transformer, Generator,

(2009-2011)

MUHIBBAH PETRO CHEMICAL

ENGNEERING

Project: Assar Chemical Dua Sdn

Bhd Sarawak

(2012) 4 months project

Project: Greece Gebeng Kuantan.

2011.

Lighting, DCS, Air Compressor, Pedestal Crane,

Actuated Valve, Control Valve, PSV, Pressure Gauge, Transmitter Pressure/ Flow/ Level/ Differential, Detector Gas/ Flame/ Smoke, Break Glass

Job function

E&I Supervisor & E & I Qc inspector

New site erection –Manage to supervise new site

erection for Electrical & instrument installation. Instruct Subcon to do the installation of lightings, Panels, DB, Mcc Panel, Fire fighting System, Transmitter, Pulling Cables, Install Cable Ladders, Testing and do the Punch list. Arranged for QC inspection with client and done the punch list

Job Function

E & I QC INSPECTOR & E&I Supervisor

Supervising in Installation of Electrical &Instrument Equipment for Additional Extension.

(2013) 8 Month

Project: LNG REGASIFICATION

EPCC PROJECT Melaka,

Malaysia (Client-PETRONAS GAS)

Under Muhibbah Petrochemical

Eng

Responsible for Electrical & Instrument (E&I) for Project jobs for the good quality and assurance as per specs and as per drawing to monitoring daily

activities against plan schedule and re-schedule plan as per progress status.

Responsible for monitoring and inspection the

Instrument Installation, Cable pulling, Glanding / Termination, and Continuity / Insulation Test.

Job Function

E&I QC INSPECTOR

Coordinate with engineering and sub-contractor

representative on daily basic to resolve any quality problem or issue.

Inspect and monitor the availability of direct or indirect materials affecting the plan, material receiving and also raise & closed Material Deficiency Report

(MDR) accordance the PO, DO, Mills Cert and

Design Engineering Practice (DEP)

Performed a Planning, Arrangement, Inspection and Monitoring for Electrical and Instrument job including raise & closed the Non Conformance Report NCR.

To establish, implement and monitor the quality to ensure the fabrication and installation of E&I in

accordance with technical specifications, drawings and specified codes practices.

Ensuring that the equipment are functioning properly and available accessible at all time.

2014

Project: Monadelphous Ship

Loading ( Australian Client )

Under Muhibbah Eng at MSI yard

(2014) 7 Month

Project: Lemon Grass Kuantan

Job Function

E&I QC INSPECTOR

Responsible for Electrical & Instrument (E&I) for Project jobs for the good quality and assurance as per specs and as per drawing to monitoring daily

activities against plan schedule and re-schedule plan as per progress status.

Responsible for monitoring and inspection the

Instrument Installation, Cable Pulling / Glanding / Termination, and Continuity / Insulation Resistant Test.

Performed a Planning, Arrangement, Inspection and Monitoring for Electrical and Instrument job including raise & closed the Non Conformance Report NCR

(NCR) and Quality Action Note to act in accordance with Specification of Design Engineering Practice

(DEP) and Inspection and Test Plan (ITP)

To ensure and update drawing Red line make-up

for actual modification at site

Job Function

E&I QC INSPECTOR

Supervise and preparing for quality inspection with client and prepared the document.

2014 – 2016

Technofit Gulf LLC Oman

Project : Semb Corp Power Plant

2016

Project: Muhibbah Eng oil & gas

OPHIR Wellhead Platform

Job Function

E&I QC INSPECTOR

Conduct Safety Briefing

Inspection of installation new Analyzer, laying cable trays, trunkings, cable ladders.

Cable glanding, cable termination.

Do commissioning, Arrange for receiving inspection for material & final inspection and hand over to client with the final check sheets. Supervise for DSL system busbar installation for over head crane.

Arranged for quality inspection and prepare the

document.

Inspection for electrical maintenance for all the electrical lighting & panel work. Daily reporting progress report to Manager.

Prepare for inspection and closed the punch list.

Job Function

E&I Qc Inspector & Fabrication monitoring

Monitor fabrication are according to engineering drawings.

Liaise with client on fabrication progress, technical issues and overall planning of project.

Ensure fabrication are accordance to QA/QC standards and procedure.

Update progress of construction and manpower allocation.

Jan 2017 to Sept 2017

PROJECT: Jacobs Engineering

(Present Job) K2C

Oct 2017 to Oct 2018

MIE Industries Sdn Bhd & CTCI

Joint venture Pengerang Project

Johor.

Present Job Nov 2018

LPIC EPCI SCU Project

CCJV/CCTI Oman

Job Function

E&I Inspector & Turnover & Monitor fabrication

Preparing the Dossier according to sub system and summit to client to sign off.

Arranged inspection with sub contractor and proceed with the pre walk and final walk with client to verify all the completed task.

Do punch list finding and record down to clear the punch list accordingly system by system to final closed down.

Collecting the test pack and do compiling after the final review for the mechanical completion.

Job Function

E&I Qc Inspector

Preparing the daily Inspection task to all my qc inspectors

Liaise with Petronas client to reporting the daily progress

Prepare the walk down with client to close the MC

Fix the weekly target as per client requirement.

Liaise with client for daily progress meeting

Job Function

E&I Qc inspector

Liaise with few subcontractors for inspection with the owner.

Follow the daily inspection schedule as per RFI schedule

Inspection of Installation for cable trays, installation of cable laying, Fire & Gas, installation of instrument equipment

Declaration:

I consider myself familiar

with Electrical &

Instrument Supervisor

and E & I

Inspector

I am also confident of

my ability to work in a

team.

I hereby declare that the

information provided are

true to the best of my

Knowledge

Verification of cable trench before cable laying.

Pre- inspection of calibration, transmitters leak test

Preparing for Dossier

References Contact Person As Per Below

Quah Kim Kheng (IR)

(General Manager of Muhibbah Eng Oil & Gas)

Tel :- +601********

Bob Hanstra

(Turnover Manager Of Jacobs Eng)

Tel :- +601*********

Haji Abdullah (QA & QC Manager Of Uhibbah

Steel Industries Oil & Gas)

Tel :- +601********

Mr Aw Project Manager for MIE industries

Pengerang P1 Project

Tel :- +601********

Mr Hope Sun Project Manager for CTCI

Pengerang P1 Project

Tel :- +601********

Mr Adong E&I Superintendant CTCI

Pengerang P1 Project

Tel :- +601********

Mr Muqeeth Instrument Qc Lead

LPIC SCU EPC-1 Project Oman

Tel :- +968********

Contact this candidate