Maintenance Technician Electrical
Resume:
RESUME
OF
JERRY E. BANDOLA
R.K.Village,Kumintang Ibaba
Batangas City 4200 Philippines Home Tel 63-43-311****
Cellphone # :+63-947*******
Email Address: ************@*****.***
SUMMARY OF WORK EXPERIENCES
Seventeen (17) years experience in the field of Electrical and Instrumentation in related to oil & gas facility (onshore/offshore), Oil refinery and industrial plant. Engaged maintenance,Inspection,installation, field calibration, testing, trouble shooting of process measurements and control instrument as interfaced in PLC and DCS during the plant construction, hook up, Pre-commissioning, commissioning and start –up.
PROFESIONAL EXPERIENCE:
Position : Senior Instrument technician/Ex Inspector
Company : Chevron-Nigeria Gas Limited, LNG Plant
Shutdown Job.
August 7,2019 to October 25,2019
Job Description:
Maintain and calibration of all instrument {FIELDBUS} like positioner control valves and level transmitter,pressure transmitter, flow transmitter, temperature transmitter,high pressure regulator, vibration,, current, and all types of gauges.
Perform to work permit system (PTW) before starting the assigned task.
Attend safety briefing and conducted at the work site and disccuss them in practice.
Position : Senior Instrument Technician/Ex Inspector
Company Brunei shell petroleum
Amec foster wheeler
Offshore
July 12,2018 to May 7,2019
Job Description:
Installation of Instrument’s stand, tubing, and instruments such as, pressure Transmitter, different kinds of process analyzer.flow transmitter, level Transmitter, transducer, limit and pressure switches and solenoid valves.
Installation of new filed local junction boxes at process area for wiring DCS instruments
Modification of existing process Compressor’s wiring and connects it to the Distributed Control System (DCS)
Perform routine inspection and check up control panel’s electrical and instrument components for operation.
Monitoring and recording of Generator’s condition and checking it if any abnormalities occur.
Checking the condition of Relay Panel’s MCC and Local Control Station distribution Board to ensure the electrical plant’s safety.
Perform the permit to work system [PTW] before doing the job.
Attend safety briefing conducted at the site and brought them in practice.
Responsible for IEC60079-14&17 installation and compliance of the entire Electrical and Instrumentation Installation during Construction and Commissioning phase of the Project, Inspection and verification of the Ex register against Project Documentation, Provide Ex installation surveillance during installation of Ex equipment, Follow the Project specific Ex integrity Assurance plan ensuring compliance with IEC60079, Check and verify Electrical Construction Ex Inspection and Test Records (EITRs A&B) are completed correctly and any faults are recorded as per the IEC60079 requirement, Provide Surveillance training and guidance to Ex installation personnel to ensure that IEC60079 is not compromised, Provide support to the Construction E&I Superintendent and Ex Superintendent ensuring that the Project Ex Integrity Assurance plan is followed, Liaise with the completions group and participate in the final completion check out and approval of inspection and Test Records (ITRs).
Company : ENSCO DS7 Drillship
Supply Oil Field Services (SOS)
January 24, 2018 to April 3, 2018
Position : Instrument Technician/Ex Inspector
Company : Deepsea Metro One Drillship
Supply Oil Field Services (SOS)
July 4, 2017 to August 29, 2017
JOB DESCRIPTION
Responsible in maintained and calibration of fire and gas system, siemens programmable logic control,Kongsberg PLC,in engine room generator,mud processing area,mud shaker room,cement room,drillfloor and all kinds of electronics control.
Perform routine inspection and check up control panel’s electrical and instrument components for operation.
Monitoring and recording of Generator’s condition and checking it if any abnormalities occur.
Checking the condition of Relay Panel’s MCC and Local Control Station distribution Board to ensure the electrical plant’s safety.
Receiving endorsement of previous shifts and make general round including pre – assessment of electrical plant condition at the beginning of the shift.
Perform the permit to work system [PTW] before doing the job.
Attend safety briefing conducted at the site and brought them in practice.
Position : Electrical and Instrument Ex Inspector
May 17,2015 to July 15,2015
Company : KENTECH GROUP LIMITED (Indonesia Banyu Urip Project)
JOB DESCRIPTION:
Responsible for IEC60079-14&17 installation and compliance of the entire Electrical and Instrumentation Installation under the guidance of the Ex Superintendent during Construction and Commissioning phase of the Project, Inspection and verification of the Ex register against Project Documentation, Provide Ex installation surveillance during installation of Ex equipment, Follow the Project specific Ex integrity Assurance plan ensuring compliance with IEC60079, Check and verify Electrical Construction Ex Inspection and Test Records (EITRs A&B) are completed correctly and any faults are recorded as per the IEC60079 requirement, Provide Surveillance training and guidance to Ex installation personnel to ensure that IEC60079 is not compromised, Provide support to the Construction E&I Superintendent and Ex Superintendent ensuring that the Project Ex Integrity Assurance plan is followed, Liaise with the completions group and participate in the final completion check out and approval of inspection and Test Records (ITRs).
Position : Electrical and instrument Ex Inspector
November 27, 2014 to May 14, 2015
Company : SBM OFFSHORE FPSO
Cidade de Marica/Saquarema
(China frontier) Guangzhou China
JOB DESCRIPTION:
Responsible for IEC60079-14&17 installation and compliance of the entire Electrical and Instrumentation Installation under the guidance of the Ex Superintendent during Construction and Commissioning phase of the Project, Inspection and verification of the Ex register against Project Documentation, Provide Ex installation surveillance during installation of Ex equipment, Follow the Project specific Ex integrity Assurance plan ensuring compliance with IEC60079, Check and verify Electrical and Instrument Construction Ex Inspection and Test Records (EITRs A&B) are completed correctly and any faults are recorded as per the IEC60079 requirement, Provide Surveillance training and guidance to Ex installation personnel to ensure that IEC60079 is not compromised, Provide support to the Construction E&I Superintendent and Ex Superintendent ensuring that the Project Ex Integrity Assurance plan is followed, Liaise with the completions group and participate in the final completion check out and approval of inspection and Test Records (ITRs).
Position : Instrument Technician
June 9,2014 to july 17,2014
Company : Pacific Sharav Drillship (Transit Singapore to capetown Africa)
Supply Oilfield and Marine Personnel Services
19 flr pearlbank center 146 Valero St. Salcedo Village
Makati city
02-8178919
JOB DESCRIPTION
Responsible in commissioning of fire and gas system, siemens programmable logic control Kongsberg PLC in engine room generator, mud processing area mud shaker room, cement room, and all kinds of electronics control.
Position : Senior Instrument Maintenance Technician/Ex Inspector
February 4,2012 to May 29, 2014
Company : Rubicon Intrepid International (FPSO)
1 Harbour Front Avenue
Keppel Bay Tower#14-05
Singapore (098632)
FPSO Location Palawan Philippines
Client : Galoc Philippines Corporation, Makati, Philippines
JOB DESCRIPTION:
Responsible in startup and commissioning of LER’s, CCR and Instrument specification check, commissioning and start up of equipment, simulation testing of field instruments, testing of device net link to PCS. Testing of various instruments link to PSD (process shutdown), PCS (process control system and ESD (emergency shutdown).
Solo person responsible for maintenance and (process / fire and gas) instrumentation of small size FPSO, Also in-charge for trouble shooting and maintenance of control of vital equipment in engine room ( boiler, air compressor, inert gas scrubber, and entire IG instrument loops.)Responsible also for trouble shooting of hydraulic control system of Seaking Marine crane and hydraulic power unit for subsea control valves’
Position : Instrument maintenance technician
October 9,2010 – February 22,2011
Company : Saudi Arabian Oil Company
SAUDI ARAMCO
Ras Tanura, Eastern Province, KSA
JOB DESCRIPTION:
Maintain and calibration of all instrument like control valves, level transmitter, transmitter, flow transmitter, high pressure regulator, ;level controller and transmitter, current and pneumatic signal converter and all types of gauges.
Perform to work permit system (PTW) before starting the assigned task.
Attend safety briefing and conducted at the work site and disccuss them in practice.
Position : Instrument Technician
April 15,2010 – May 25,2010
Project : ConocoPhillips
Bayu Undan Shutdown[ OFFSHORE]
Estimor Dili Australia
Company : AMEC Services Limited Philippines Branch
Level 22 Tower 1, Insular life Corporate Center
Corporate corner Commerce Avenue
Filinvest Corporate City, Alabang Muntinlupa City,
Philippines
JOB DESCRIPTION:
Maintain and calibration of all instrument like control valves,level transmitter, transmitter, flow transmitter, high pressure regulator, ;level controller and transmitter, current and pneumatic signal converter and all types of gauges.
Perform to work permit system (PTW) before starting the assigned task.
Attend safety briefing and conducted at the work site and disccuss them in practice.
Position : Instrument Maintenance Technician
December 17,2009 –March 31,2010
Project : Shell Philippines Exploration (SPEX) OFFSHORE
Malampaya Offshore Shallow Water Platform
Palawan, Philippines
hCompany : AMEC Services Limited Philippines Branch
Level 22 Tower 1, Insular life Corporate Center
Corporate corner Commerce Avenue
Filinvest Corporate City, Alabang
Muntinlupa City, Philippines
JOB DESCRIPTION:
Perform Preventive Maintenance of all kinds of instrument and control, fault finding, troubleshooting, loop checking.
Perform Troubleshooting and fault finding of the Solar Turbine DCS and PLC and Delta V Emerson Process Management.
Preparation of incoming shutdown on Feb.10, 2010.
Assist permit to work system (PTW)
Position : Senior Instrument Maintenance Technician
March 2007– April 2009
Project : Brunei Shell Petroleum Company
Tali field Offshore Platform
Darrat Operational Plant (DOP)
Negara Brunei Darussalam
Company : Mashhor General Contractor SDN BHD
( SKS SDN BHD)
G22, Lot 3698,Jalan Pangsa
Seria KB2733
P.O.Box 416,Kuala Belait KA1131
Negara Brunei Darussalam
JOB DESCRIPTION:
Validation and calibration of multi variable transmitter rosemount 3095 and 3051s fieldbus rousemount transmitter.
Troubleshooting and validation of all metering like coriolis flowmeter(endress +hauser),Turbine meter, Floboss S-600 flowmeter,Micromotion 2700 flowmeter and water cut meter.
Maintain and calibration of all instrument like control valves,level transmitter, transmitter, flow transmitter, high pressure regulator, ;level controller and transmitter, current and pneumatic signal converter and all types of gauges.
Perform to work permit system (PTW) before starting the assigned task.
Attend safety briefing and conducted at the work site and disccuss them in practice.
Position : Senior Instrument Maintenance Technician
(July 2000 – September 2006)
Company : Sirte Oil Company
Marsa el Brega Tripoli Libya
Manufacturing of Oil and Gas.
JOB DESCRIPTION:
Overhauling and calibration of all instruments like control valves, level transmitters, pressure transmitter, flow transmitter, differential transmitter, high pressure regulator, caged displacer sensor, level controllers and transmitter, multi-trol receiver and controllers, current to pneumatic signal converter, chemical pump injector, relief valves, diaphragm measuring instrument recorder, oil meter and all types of gauges.
Conduct loop checking, pre-commissioning, commissioning, field calibration and troubleshooting of process measurements and control instruments such as transmitters and single loop controllers.
Servicing of field instrument, replacing the old instrument with new one as per shutdown plant, alarm and trip check.
Performed other related job assigned by immediate supervisor.
Attend safety briefing conducted at the site and brought them in practices.
Position : Instrument Maintenance Technician
(February 1997 – September 1999)
Company : Universal Robina Corporation
Bi-axially oriental propylene Palnt (BOPP)
Simlong Batangas City
JOB DESCRIPTION:
Commissioning and testing and maintain all the machined like compressor, power transformer, boiler, pump radiator fan, chiller, control room, programmable logic Control (PLC) and all pneumatic and electronics circuit.
Perform routine inspection and check up control panel’s electrical components for operation.
Monitoring and recording of Generator’s condition and checking it if any abnormalities occur.
Checking the condition of Relay Panel’s MCC and Local Control Station distribution Board to ensure the electrical plant’s safety.
Receiving endorsement of previous shifts and make general round including pre – assessment of electrical plant condition at the beginning of the shift.
Position : Instrument Technician
(September 1994- November 1996)
Project : Shell Refinery
(Star project)
Shell refinery Tabangao Batangas)
Company : Engineering Equipment Incorporated (EEI)
Manggahan St. BRGY. Bagumbayan
Quezon City.
JOB DESCRIPTION:
Installation of conduit, cable termination, pre-commissioning and commissioning of
Installation of Instrument’s stand, tubing, and instruments such as, pressure Transmitter, different kinds of process analyzer.flow transmitter, level Transmitter, transducer, limit and pressure switches and solenoid valves.
Installation of new filed local junction boxes at process area for wiring DCS instruments
Modification of existing process Compressor’s wiring and connects it to the Distributed Control System (DCS)
TRAININGS AND SEMINAR:
COMPEX TRAINING (Explosion proof)
Certificate number 38233
February 19,2019
February 19,2024
ELECTRO-TECHNICAL OFFICER (COC-COE)
Date of issue January 10, 2018
Date of expiry January 10, 2023
ENGINE WATCH REGULATION III/4
Issued September 23, 2017
PROFICIENCY IN SURVIVAL CRAFT AND RESCUE BOAT (PSCRB)
Issued January 6, 2018
MEDICAL EMERGENCY-FIRST AID (MEFA)
Issued December 9, 2017
MARINE HIGH VOLTAGE
Issued December 15, 2017
FURTHER OFFSHORE EMERGENCY TRAINING (FOET)
CONSOLIDATED TRAINING SYSTEMS,INC.
Roxas Boulevard, Ermita, Manila
PhilippinesValid until March 8,202
Helicopter Escape
Survival and Rescue
Fire Fighting and Self-Rescue
Emergency First Aid
ADVANCE TRAINING IN FIREFIGHTING
CONSOLIDATED TRAINING SYSTEMS,INC.
Roxas Boulevard, Ermita, ManilaPhilippines
Issued December 28,2017
BOSIET (BASIC OFFS HORE SAFETY INDUCTION EMERGENCY TRAINING)
MEGAMAS TRAINING COMPANY SDN BHD.
Lot 3593 Simpang 26, Jalan Mumong Kuala Belait.
Negara Brunei Darussalam.
March 30, - April 01, 2007
TROPICAL BOSIET INCLUIDING TRAVEL SAFETY BY BOAT AND EBS.
Safety Induction
Sea Survival
Basket / Swing Rope transfer
Life Boat Safely and Escape
Emergency First Aid CPR
Smoke Hood / Escape set B.A
Basic Fire Fighting
Emergency Breathing System ( EBS )
Helicopter Underwater Emergency Training ( HUET )
BASIC TRAINING
Lyceum of the Philippines University
Maritime Training Center
LIMA Campus Cuta Batangas City
Issued August 23,2017
1. Personal Survival Techniques
2. Fire Prevention And FireFighting
3. Elementary First Aid
4. Personal Safety And Social Responsibility
MARINA --SEAFARER 'S IDENTIFICATION AND RECORD BOOK
SHIP SECURITY AWARENESS TRAINING AND SEAFARERS WITH DESIGNATED SECURITY DUTIES (SDSD)
The Maritime Training Center of the Philippines
Antonio building T.M.Kalaw Bocobo st Ermita Manila
Issued August 29,2017
PLC - PROGRAMMABLE LOGIC CONTROLMFI – MERALCO FOUNDATION, INCORPORATED
Calamba Branch, Crossing, Calamba, Laguna
April 18,2009 to May 16, 2009
PERMIT TO WORK SYSTEM
WORKING AT HEIGHT
BREATHING APPARATUS
SAFETY INDUCTION
MANAGING HAZARD AT THE WORK PLACE (Megamas training company sdn bhd) January 10, 2012
COMPETENT FRONTLINE WORKSITE SUPERVISOR (Megamas Training company sdn bhd) October 11,2011
TRAVEL SAFELY BY BOAT (MEGAMAS TRAINING COMPANY OPITO APPROVED) September 5,2011 to September 4,2015
AUTHORIZED GAS TESTER (MSTS ASIA) August 1,2014 to july 1,2017 Certificate no.5008559
CONFINED SPACE ENTRY AND CONFINED SPACE RESCUE (MSTS ASIA) May 1,2014 to april 1,2017 Certificate no.5008538
ISSOW LEVEL 1 (October 12,2011)Brunei Shell Petrolium HSE Induction
Asbestos awareness
Basic H2S Training
Pressure Testing Awareness
Small Bore Tubing Swagelock Training
PERSONAL DATA
Date of Birth : March 24, 1971
Place of Birth : Calamba, Laguna
Civil Status : Married
Citizenship : Filipino
Height : 5’8”
Weight : 150 lbs
Sex : Male
Religion : Roman Catholic
Father’s Name : Jesus Bandola
Mother’s Name : Eugenia Bandola
Their Address : R.K.village kumintang ibaba, Batangas City
Postal code : 4200
Person to be contacted:
In case of emergency : Sheryl Bandola
R.K.village kumintang ibaba Batangas City 4200
EDUCATIONAL BACKGROUND
Elementary : Gulod West Elementary School
1984 – 1985
High School : Batangas National High School
1988 – 1989
College : Batangas State University
(Pablo Borbon Memorial Institute of Technology)
Diploma in Technology / Industrial Electronics
Special Skills : Electronic Instrument and Electrician
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
Applicant’s Signature
Contact this candidate