Electrical Engineer Engineering

GOWDHAM SHANKER C

Mobile: +91-735*******

Email: ********@*****.***

**************@*****.***

OBJECTIVE

B.E. (Electrical & Electronics Engineering) with 10.3 years of experience in Electrical and Instrumentation Inspection Field. I am now seeking a challenging and rewarding career based on E & I QA/QC Engineer position within Oil and Gas, EPC, Manufacturing industry quality, Third party inspection services where personal ability, experience and commitment to professionalism would be of value.

PROFESSIONAL SYNOPSIS

Name of the Organization: NASSER AL HAJRI CORPORATION Client: SAUDI ARAMCO

Project: FADHILI GAS PLANT- Sulphur Recovery Unit

Designation : QC-Electrical Engineer

Duration : OCT 2017– DEC 2019

Aramco approval Transmittal : FGPD/SRU-SA-PSAL-T2376 Key Responsibilities:

Responsible for client contractual document and specification.

Preparing QAP (Quality Assurance Plan) & FAT as per client requirement.

Maintain project wise ITP & Inspection Report.

Preparation of Inspection call & testing as per client requirement.

Responsible for routine preventive and breakdown maintenance

Ensure the correct implementation of the approved Inspection Test Plan, SP`s,DEP

Ensuring that recurrence of nonconformity is prevented through an efficient control system

Establishing & maintaining quality records of the company, duly approved by Consultant & project owner.

Managing quality inspections & audit findings are suitably tracked through acceptable & timely close out.

Overall control and management of project documents. Ensure strict compliance to the Project Quality Plan, for the scope of construction and its supporting procedures. Preparation of project Quality control procedures (QCP), Inspection and testing plan

(ITP),Method statements

Inspection Activity’s:

Incoming Materials inspection and review of Test certificates as advised by material controller.

Inspection of cable tray & trench inspections as per approved IFC drawings.

Inspection of Cable pulling, cable laying and cable identification based on cable schedule/specifications and Cable Termination

Conducting Cable testing /relevant loop checks (continuity test, and insulation resistance test)

Inspection of Installation equipment, Devices, Enclosures, Instrument, junction box.

Inspection for installation, Testing and pre-commissioning of Transformers.

Inspection for installation, Testing and pre-commissioning of Earthing system

Inspection for installation, testing of control building lighting protection system.

Inspection for installation, Testing and pre-commissioning of control building 415V switchboards.

Inspection for installation, and Testing and pre-commissioning of LV & HV motors. Name of the Organization: SHAHER UNITED TRADING & CNTRACTOR CO LLC (Short term project)

Client: Petroleum Development Oman LLC (PDO).

Project: 1.Maintenance of 132KV power stations & substations electrical equipment’s. 2. 132KV YIBAL power Station And QARNALAM Power Station. Designation : QC-Electrical Engineer

Duration : Mar 2017– June 2017

Inspection Activity’s:

Inspection, Testing and pre-commissioning of replaced Transformers

Inspection, Testing and pre-commissioning of Earthing system

Inspection, testing of control building lighting protection system.

Inspection, Testing and pre-commissioning of control building 415V switchboards.

Inspection, and Testing and pre-commissioning of outdoor lighting

Inspection, and Testing of33 KV HV cable HIPOT

Inspection, and testing of lighting switch, lighting junction boxes, lighting fixtures, conduit lighting cable, cable tray with all installation accessories.

Condition Monitoring (Thermography, Partial discharge, Corona discharge)

Maintenance of station batteries.

Analysis and Close the Project Punch Points.

Preparation of final documents and handed over to the client. Name of the Organization: Bureau Veritas India Pvt Ltd, Chennai. Designation : Field Inspector (Electrical & Instrumentation) Duration : From: Dec-2011 To: Mar-2017

Key Responsibilities:

Performing the Inspection as per Various National, International Standard and End Customer approved Procedure for Various Power and Oil & Gas Projects.

Review of type test certificates, Routine test certificates, technical documents, Raw material test certificates Etc.

Proficient in Pre-SAT, SAT, FAT, (Site acceptance test& factory acceptance test), Coordinated with vendors in line with engineering department for approval.

To ensure the approved Quality Assurance Plan (QAP) & Guaranteed Technical Parameters (GTP) in line with the Project requirements.

To ensure the Document Approval (like GA Drawing, Data sheet, QAP etc) before the final inspection.

Issuing the Inspection report after Completion of inspection with inspection observations.

Review of the Vendor Compliance Report for the inspection observation Points.

Conducting electrical safety audits as per OISD standards for refinery plant.

Proficient in conducting safety audits as per the Indian standard for Residential projects

(VGN and SARE HOMES) and HPCL ALDS stations.

Inspection Activity’s:

• Transformers-up to 80 MVA Transformer and up to 1250KVA Dry Type Transformer

• Neutral Grounding Resistor: up to 33KV-1500A,

• Circuit Breakers: SF6 Circuit Breaker up to 765KV (Routine test), 11KV & 33KV VCB Panel.

• Control & relay Panel: Relay & control Panel of 400/220KV.

• Isolators: Outdoor type Isolator up to 765KV, 11KV Load break switch, HT terminal Connector.

• L.T Equipment’s of PMCC, MCC Panels, Motors: PMCC& MCC (Fixed Type and Draw out type), Control Panels, VFD Panels, Soft Starter (SCR) Panel, and PLC panel, light fitting-Indoor and Outdoor, NGR Panels, L.T Squirrel cage induction Motor.

• Junction boxes: Flame proof Junction boxes (Exe & Exd) & Flame proof Panels (Exe & Exd) of Off Shore equipment’s and Thermoplastic Encloses & Panels (IP-55 & IP-65).

• Insulators- Disc Insulators & Solid core insulator up to 400KV system.

• Bus Duct-LT (415V) & up to 33KV bus ducts

• Other Electrical Product: VRLA battery (Maximum 3000AH) & battery charger, On Line UPS (up to 30KVA), Servo stabilizer, CVT.

• Inspection and installation of Switch yard equipment’s 400KV(CT,PT,SF6 Breakers,LA, Isolators)

• Inspection and installation of EHV Cables up to 220KV

• Inspection and installation of 11KV HT Motors

• Inspection and Installation of LT (MCC,PMCC,PCC Panels), HT(VCB) Panels and Control and Relay panels

• Inspection of Earthing systems in 400KV Substation

• Inspection of Pressure switches

• Inspection of 33/5 TON EOT(Electrical Overhead Travelling) Cranes

• Responsible for monitoring of E & I items storage as per the contract requirements

• Responsible for resolving quality related issues in site, as per the approved Procedures

• Responsible for maintaining IMME in the project site, coordination with laboratory for arranging calibration of the instruments and responsible for calibrating in- house equipment

• Site acceptance test: Retail Outlet (RO)-automation for IOCL projects in coordination with Honeywell Automation and Rose man Automation systems of Site Acceptance Test.

•

Previous Assignment:

Name of the Organization: Tamil Nadu Electricity Board Designation : Graduate Engineering Trainee

Duration : From: Aug 2010– Aug 2011

Key Responsibilities:

• Testing and Calibration of energy meters.

• Testing and Maintenance of Protective Relays.

• Testing and Maintenance of VCBs, OCBs, SF6 and Isolators.

• Testing and Maintenance of Power transformers, CTs, PTs.

• Testing of Distribution Transformers, Transformer Oils, Insulators and Bushings.

• Testing of Batteries and Battery Chargers.

• Commisioning circuit breakers, power transformers, Distribution Transformers.

• Testing of transformer oil testing, Breakdown Voltage checking, Energy Meter repairing and Ballast Checking.

Name of the Organization: Sree Ragavendra Industrial Engineers Designation : Testing Engineer

Duration : From: Jun 2009 To: Aug 2010

Key Responsibilities:

• Erection, commissioning, Trouble shooting of VCBs, OCBs, SF6 and Isolators.

• Erection and commissioning of Power transformers, CTs, PTs.

• Trouble shooting of Distribution Transformers.

• Maintenance and testing of Transformer Oils, Insulators and Bushings.

• Erection, commissioning and maintenance of Batteries and Battery Chargers. SKILL & KNOWLEDGE

• Experience of Inspection and Testing of various Electrical & Instrumentation Equipments.

• Knowledge and experience in inspection of Explosion Proof Electrical Equipments according to Atex/NEMA Standards

• Knowledge and experience in IEC,IS,IEEE,BS Electrical Standards SOFTWARE PROFICIENCY

OPERATING SYSTEMS : Windows 2000, Vista and windows xp. LANGUAGES : Basics of C,

PACKAGES : Microsoft Office.

SCHOLASTICS

Qualification

Institution Board/university

of study

Year of

passing

Percentage

%

BE/EEE

St.Peters Engineering

College, Chennai.

Tamilnadu

Anna University

2009

61

HSC

Velammal Matriculation

Higher Secondary school,

Chennai. Tamilnadu

State Board

2005 74

SSLC

Infant Jesus matriculation

Higher Secondary School.

Chennai.Tamilnadu

Matriculation 2003 62

PERSONAL DOSSIER

• Name : GOWDHAM SHANKER C

• Date of Birth : 13-10-1987

• Gender : Male

• Father’s Name : G.CHANDRAN.

• Mother Tongue : Tamil.

• Languages Known : English, Tamil & Hindi.

• Nationality : Indian.

• Passport No : T8184688 Validity date: 11.10.2029

• Pan card No : BCDPG3870L

• Address of correspondence : No.196/16, Green Field appartments, Anna Nagar West Extn.

Near Frontier Lifeline Hospital

AnnaNagar West

Chennai-600101

DECLARATION

I hereby declare that all the details mentioned above are correct to the best of my knowledge and nothing has been concealed or distorted.

Yours Sincerely,

(Gowdham Shanker C)

Contact this candidate