Christopher Bain Mitchum

*** ****** **.

LaGrange, GA 30241

1-251-***-**** (cell)

addgk0@r.postjobfree.com

Objective

To work with a steady, ethical company with an outstanding history of valuing its employees. A place I can call home and retire with.

To continue working in my field of knowledge and grow in my knowledge as technology grows.

To make lifelong friendships with my work family and be in a family oriented work environment.

Prefer rotational work schedule but will work anything.

Experience

I have over 18 years’ experience in the oil and gas industry and over 22 years’ experience in electronics and mechanical work. I have certificates of training in multiple areas of offshore rig equipment and industrial equipment, as well as safety and all safety related training.

Jensen USA

Field Service Tech

07/2019 – 02/2020

Install Industrial laundry equipment. Tunnel washers, presses, shuttle conveyors, dryers, flatworks and ironers. Install control cabinets for all equipment and wiring.

C&M Conveyor

PLC Tech II

02/2019 – 06/2019

Install conveyors for corrugated box companies. This includes setting and anchoring conveyors, running preset wire bundles through conduit to junction boxes, wiring j-boxes and panels, installing push button stations and setting up touch screens, setting photo eyes and other instrumentation, hooking laptop and troubleshooting any bugs in system.

Reason for leaving – Hostile work environment

Oceaneering

ROV Tech/ Pilot

04/2018 – 02/2019

All maintenance, electrically and hydraulically associated with the Remotely Operated Vehicle. Hooking up hydraulic tooling. Pilot.

Reason for leaving – Better pay and benefits

Georgia Pacific

Electro/Mechanical Tech

01/2018 – 04/2018

All electrical maintenance associated with the paper mill. All automated maintenance. LOTO and safety systems.

Reason for leaving – Personal family reasons.

Landscaping

09/2017 – 12/2017

Mando, Hogansville, GA

04/2017 – 09/2017

Electro/Mechanical Tech II (highest level)

Duties are working with servo controlled robotics and pendants, specifically Denso, Yaskawa, Robostar. Pneumatics with Festo controlled cylinders, Presses, Siemens PLC’s, proximities and distance sensors, load cells, VFD’s, Clean Room Environment.

Preventive Maintenance and participation with safety programs.

Reason for leaving – To try to work for myself

Break between 06/2016 to 04/2017 for schools, job hunting, and acquiring my ETO License (Electro Technical Officer) on my merchant mariners certification.

Ventura Petroleo/ Lantz Services

01/2015 – 06/2016

Electronics Tech

Troubleshoot and repair of all electrical components, sensors, encoders, transducers, etc… affiliated with the rig.

Maintain automated drill floor equipment, MMI’s, VFD’s, PLC’s, operational equipment

Preventive maintenance and participation with safety programs.

Practice of HSE policies, procedures, and permits affiliated with jobs.

AKER drilling equipment. Cameron BOP equipment.

Converteam DP Systems.

Siemens Step 7 and Siemens Drives with Starter.

Liebherr Cranes

Reason for Leaving: Contract with between the company and client expired and was not renewed due to the oil market. Everyone got laid off.

Vantage Drilling

04/2011 – 12/2014

Chief Electronics Tech

Troubleshoot and repair of all electrical components, sensors, encoders, transducers, etc… affiliated with the rig.

Maintain automated drill floor equipment, MMI’s, VFD’s, PLC’s, operational equipment

Preventive maintenance and participation with safety programs.

Practice of HSE policies, procedures, and permits affiliated with jobs.

AKER drilling equipment. Cameron BOP equipment.

Converteam DP Systems.

Siemens Step 7 and Siemens Drives with Starter. Soft PLCs

Liebherr Cranes

Reason for Leaving: Heard Vantage was going bankrupt, and they eventually did. Everyone on my rig got laid off. I left before that happened.

Transocean/ Legacy Global Santa Fe

01/2007 – 04/2011

Chief Electronics Tech.

Troubleshoot and repair of all electrical components, sensors, encoders, transducers, etc…affiliated with the rig.

Kongsberg DP Systems

Hydralift Knuckleboom Cranes

Maintain automated drill floor equipment, MMI’s, SCR’s, VFD’s, PLC cabinets, operational equipment

NOV, V-ICIS Cyberbase Systems drilling package using Siemens PLCs. Hydril BOP equipment.

Preventive maintenance and participation with safety programs.

Practice of HSE policies, procedures, and permits affiliated with jobs.

Reason for looking for another job: Was happy with Global Santa Fe before the merger and also wanted to work international.

Noble Drilling

01/2006 – 12/2006

Electronics Tech.

Troubleshoot and repair of all electrical components, sensors, encoders, transducers, etc…affiliated with the rig.

NOV drilling equipment. Cameron BOP equipment

Preventive maintenance and commissioning of a new-build rig.

Practice of HSE policies, procedures, and permits affiliated with jobs.

Reason for leaving: At the time Noble did not carry any disability insurance.

Oceaneering International, Inc., Bayou Vista, LA

7/1998-12/2005

ROV Electronics Tech/ Pilot

Maintenance, Troubleshooting, and Operation of Remotely Operated Vehicle.

Practice of HSE Policies and Stop Programs.

Reason for leaving: To be a rig ET, better benefits, more money, and expanded experience.

Diamond Offshore Drilling Inc., Houston, TX

02/1998 – 06/1998

Roustabout

Performed general roustabout duties, from rigging and working with crane, maintenance and upkeep of rig, drill floor operations.

Practiced HSE Policies and STOP Programs.

Reason for leaving: The Oceaneering job looked like what I would want to do and it was. It just did not pay very well.

Automated Control Systems, Inc., Dothan, AL

Summers of 88’, 89’, 90’, and while attending school in 96’ and 97’

Shop Tech.

Layout, Construction, and Wiring of PLC’s

General Shop Work

General Office Work

Reason for leaving: Temporary job while attending school.

Education

Wallace State Comm. College, Dothan, AL

Associates - Industrial Electronics, December 1997

Emphasis was on basic industrial electronics and industrial electronic theory.

Specifics of study in Fiber Optics and PLC Programming (Allen Bradley).

Certificate in GE Fanuc PLC Programming for Continuing Education.

Other Training and Certificates

Ross-Hill intermediate and advanced EG-III SCR’s, NOV Top Drive maintenance, Siemens Step 7 PLC’s intermediate and advanced, Siemens Step 7 Troubleshooting, AKER Drilling Equipment, NOV Cyberbase maintenance, Cameron BOP Electronics, Sonardyne, Water Survival, CPR, Electrical Maintenance in Hazardous Areas. Aspin Kemp & Associates 6th Generation Power Plant, Comp EX, Liebherr Cranes, Siemens G150 Drives. Siemens Starter for Drives. Basic and Advanced Firefighting. STCW 2010, Medical Care Provider, First Aid and CPR, Proficiency in Survival Craft, Personal Survival Techniques, Personal Safety and Social Responsibility, Permit To Work, ETO (Electro Technical Officer) Merchant Mariner Credential.

References

Adam Pfleger – Electronics/ Electrical Supervisor, Transocean, Houston, Texas, addgk0@r.postjobfree.com (cell) 1-828-***-****

Gary McGowan - CEO, Automated Control Systems, Dothan, Alabama, addgk0@r.postjobfree.com 1-334-***-****

Kichan Park – Electronics Tech, Ventura, Busan S. Korea, addgk0@r.postjobfree.com, +82-10-500*-****

Malcolm Steele – Electrical Supervisor, Ventura, +44-771*-******, addgk0@r.postjobfree.com

Contact this candidate