Engineer Mechanical

Location:

Doha, Qatar

Posted:

July 02, 2020

Contact this candidate

Resume:

Profile: Male, **, Married

Nationality: India

Current Location: Doha, Qatar

(Visit / Tourist Visa valid till June 2020)

Driving Licence: None

Current Position: QA/QC - MEP Engineer

Company: FYAP-FCC, METRO RED LINE SOUTH - ELEVATED AND AT-GRADE, FYAP. ( Last worked company)

(Reporting to: Manager-CEO)

Notice period: Upto 1 month

NOC Requirement: None

Preferred Locations: Qatar

Salary Expectation: QAR 11,000 per month

Mohammed Mubashir Ali

Ref: LC047-780

Mobile: +974--74731579

Mobile: +91--630-***-****

***********.***@*****.***

Summary

Work Experience

Apr 2015 - Jan 2018 FCC-FYAP (FCC-Yuksel-

Archirodon-Petroserve JV), M004-

Red Line South Elevated & At

Grade,Doha Metro Project.,

DOHA, Qatar, Doha, Qatar

Doha, Qatar

MEP QA/QC ENGINEER (PRE-CAST & VIA-DUCT)

Responsibilities:

- Inspecting all the MEP Services (Drainages, LV Containments & CCTV Cables) in the different segments of the VIA-DUCT as per the approved drawing.

- Checking the installation of drainages, LV containments, Earthing Rods, Earthing Plates, CCTV Cables in the GIRDERS (28 meters, 32 meters & 40 meters) in Pre-Cast.

- Checking the MEP Services in the RAMP WALLS of the VIA-DUCT, PIERS & the PIERCAPS, CAST-IN-SITU BRIDGES for the installation of Drainages, LV Containments, Earthing Rods, Earthing Plates, CCTV Cables, Etc.

-Involved in the Testing & Commissioning in the VIA-DUCT for the MEP SERVICES.

-Checking the CONTINUITY of the different SPANS, JUMPER installation etc in the VIA-DUCT.

- Checking the PIERS by conducting CONTINUITY & MEGGER TEST. Apr 2015 - Jan 2018 FCC-FYAP (FCC-Yuksel-

Archirodon-Petroserve JV), M004-

Red Line South Elevated & At

Grade,Doha Metro Project.,

DOHA, Qatar

Doha, Qatar

MATERIAL ENGINEER (QA/QC- MEP) (Reporting to Manager-CEO) Responsibilities:-

-Conducting material Inspection by its documents or with its physical condition/ match with client specifications.

-Maintaining the documentation to the full proof of our activities including supporting documents & correspondences.

-Checking whether material received in good conditionor not.

-Checking the material as per the Approved material submittal.

-Inspected all the materials received onsite for the SANITERY,PLUMBING

,HVAC, ELECTRICAL ITEMS.

-Inspected all the ESCLATORS, ELEVATORS AND THE MOVING WALKS in the STATIONS.

Different materials checked on site:-

- CHILLERS, CRAC UNITS, AHU'S, FAHU'S, Air Compressors, VALVES (Gate Valves, Check Valves, Butterfly Valves & STRAINERS for the FIRE FIGHTING SYSTEM AND THE CHILLED WATER SYSTEM), PUMPS (Fire Pumps, Jockey Pumps, Chilled Water Pumps, Submersible Pumps And Booster Pumps), G.I. DUCTS, FIRE RATED DUCTS, INSULATIONS (Phenolic, Duct Insulation, Pipe Insulation, Armaflex Insulation), Fire Protection Pipes, Chilled Water Pipes, Pre-insulated Pipes, FM 200 Pipes, FM 200 Devices, FM 200 Cylinders, Nozzles, Panels, Emergency Lightenings, Manual Pull Stations, Smoke Detectors, Fire Hyderents, Fire Hose Cabinets, Breaching Inlets, Fire Hose Reels, Fire Extinguishers, Fire Rated Boards, Sprinklers, Exhaust Fans, Fire Damperst, Back Draugh Dampers, Volume Control Dampers (VCD'S), Field Devices And Sensors, Electrical Water Heaters, Electrical Panels, ATS Units, BACS Panels, Fire Rated Cables And Non-Fire Rated Cables, Cable Trays, Cable Trunkings, Cable Ladders And Accessories.

Apr 2015 - Jan 2018 FCC-FYAP (FCC-Yuksel-

Archirodon-Petroserve JV), M004-

Red Line South Elevated & At

Grade,Doha Metro Project.

Doha, Qatar

MEP QA/QC Engineer- STATIONS (Economical Zone, RBF, AL-Wakra) I am a Mechanical Engineering Graduate with more than 12 years of experience working as a MEP-QA/QC Engineer in the Site execution of MEP Jobs including-Electrical, HVAC, Fire Alarm, Fire Fighting, BMS, CCTV, Plumbing system and preparing the quality documents, as per Project Specification

system and preparing the quality documents, as per Project Specification

.Confident to take any Job related to Quality Control and inspection and Testing

& Commissioning of all MEP Services.

Responsibilities:

- Ensure proper installations are done as per the approved design drawings and project specification.

- Preparation of weekly & monthly report and submit to Client / Consultant

& Department Manager for the same.

- Ensure proper installations are done as per the approved design drawings and project specifications.

- Inspecting installations, Pre commissioning & commissioning of MEP Systems.

-Checking all the Mep Services in the Mechanical and Electrical Rooms.

-checking MEP Installations for the Fire Pump Room and the Chilled Water Pump Room .

-Cheking the Installation of the Fire Hyderents, Fire Hose reels, Breaching Inlets, Sprinklers Installation Etc.

MEP Inspections ( Material, Installation and Testing & Commisssioning) for the ESCALATOR, ELEVATOR AND THE MOVING WALKS .

Responsibilities:-

-Checking material inspection for the ESCALATOR, ELEVATOR AND THE MOVING WALKS .

-Invoved in the different stages of Installation of ESCALATORS (Checking FAT Report, MSDS,Survey reoprt, Escalator Positioned According to FFL, Isolation Rubber pads, Balustrade Assembly, Steps,Guiderails,Handrail,Gap between Steps/Skirts/Combs, Safety Devices etc.).

Elevators:-

--Invoved in the different stages of Installation of ELEVATORS (Checking FAT Report, MSDS,Survey reoprt, Elevators Positioned According to FFL, Brackets

/ Beams /Guiderails, Elevator Roping,Cars Assembly etc.). Moving Walks:-

-Invoved in the different stages of Installation of MOVING WALKS (Checking FAT Report, MSDS,Survey reoprt, Moving Walks Positioned According to FFL, Isolation Rubber pads, Balustrade Assembly, Steps,Guiderails,Handrail,Gap between Steps/Skirts/Combs, Safety Devices etc.).

May 2012 - Mar 2014 Sky Oryx JV - TAISEI

CORPORATION LTD.

Doha, Qatar

QA/QC Mechanical Engineer

Responsibilities:

- Performing all types of inspections for all equipment of HVAC, Plumbing, Fire Fighting, BMS, Sanitary and domestic (Duct installation, AHU, FCU, Plumbing Equipments, Fire Fighting sprinkler rooms, sanitary equipments and pipe lines.

- Performing different tests namely Hydro Pressure Test, Gravity Test, Integrity Test on site.

- Inspecting Fire Hose Cabinets and Pre-Action Cabinets onsite.

- Inspecting Air Handling units and the Fan Coil Units in the Mechanical rooms.

- Inspecting FM 200 rooms and the sprinkler rooms of the Fire Protection System.

- Inspecting the Automatic Air Vents (AAV) and the Inspectors Test Connectors

(ITC) of the Fire Protection System and the Pre-Action System.

- Inspecting the Zone Control Valves of the Fire Protection System.

- Inspecting the Fire Dampers, Smoke Dampers, Access Panels, Angular Supports, Sway Bracing Supports, Insulation and Labelling in the Ducting System.

- Inspecting the Roller Bearing Supports of the Chilled Water Pipe Lines.

- Inspecting the Angular Support, Sway Bracing Support, Colouring and Labelling of the Sanitary Pipe Lines.

- Worked in the Pre-QCDD Punch Closing Team for dosing the punches given by Qatar Civil Defence Authority.

- Coordinating With Sub-Contractors, Consultants and Client during inspections.

- Reading the drawings and coordinating with Design and Site Engineers if any

- Reading the drawings and coordinating with Design and Site Engineers if any modification or As-built.

- Completion of Snag list.

- Coordinating with the technical solutions on Fire stop sealent work.

- Material Inspection of all types of Equipments for the building. Apr 2009 - Apr 2012 H-H Marketing And Engineering

Services

Hyderabad, India

Design & Site Engineer

Responsibilities:

- Cooling Load Calculation after building survey using CARRIER and ASHRAE standards by manuals and by latest HVAC software,

- Calculation of blower CFM, Air distribution duct design following SMACNA and DW142 duct design codes, selection of diffusers, Grills, G.I. sheet, etc.

(McQuay Software).

-To prepare the selection of machines like FCU'S, AHU'S, CHILLERS, PUMPS, etc. on the basis of Heat load calculations from respective modes like Blue star, Voltas and Carrier.Erection/ installation of Hot water converter, Hot water coils, inertia filters, Bleed fans, Exhaust fans, kitchen Hoods, all types of Valves and inspect the same for the conformance of specialization to be followed. Sep 2005 - Mar 2009 SUPERIOR TECHNICIANS Hyderabad, India MECHANICAL FIELD ENGINEER

Responsibilities:

- Inspection as per the drawing and coordinating with design and site engineer if any modification or as-built.

- Inspection with Consultant and main contractor rectifying the comments in coordinating with design and site engineers.

- Installation of Pumps, AHU, FCU, HEPPA filter, Centrifugal fans, Doom Centrifugal fans, Chillers, Boilers, Chilled water and Hot water pipe, Ducts AHU, Expansion joints for firefighting, plumbing and fire sealant. Education

Apr 2002 - Apr 2005 Jawaharlalnehru Technological

University

Andhra pradesh,hyderabad, India

Mechanical, Bachelor(BSc/BA), GPA Second Class ( 56%) Apr 1994 - Apr 1997 Quli Qutub Shah Government

Polytechnic

Andhra pradesh, hyderabad, India

Diploma in Mechanical Engineering, Other, GPA First Class ( 66% ) Other Certificates

2015

LEAD AUDITOR TRAINING

COURSE (Quality Management

Systems)

INTERTEK,IRCA REFERENCE A17072

,Certificate Number-111116, Qatar

IT Skills

Windows & Office tools

Computers Applications Expert

AutoCAD Advanced

Zutec Expert

Languages

Urdu Native

Hindi Fluent

English Fluent

Contact this candidate