Electrical Engineer
Resume:
MUHAMMAD WAQAS AZEEM
Mobile. +966-**-*******
Iqama. 240-***-**** (Transferable)
DOB. Nov, 11th 1990
Availability. Available
Current Location. Dammam
Nationality. Pakistani
Driving License: Saudi Arabia
Skype. muhammad_waqas_azeem
E-mail. ********.*****.*****@*****.***
PROFILE & OBJECTIVES
A qualified professional having degree of BS Electrical (Electronics) Engineering with diversified industrial experience 6.6 years, this covers 4.5 years of working as Electrical Engineer & 2.2 Years as Testing & Commissioning Engineer. Also possess excellent knowledge of MS Office, MS Excel, MS Power Point MS Visio, SAP, Primavera & IT skills, Emergency Handling, Quality Assurance and Risk Assessment. I intend to be part of an organization having dynamic, culturally diverse environment to obtain the highest level which insure both personal and organizational growth, at present, looking for a position which help me for the personal and professional growth.
ACDAMIC QUALIFICATION
BSc Electrical (Electronics) Engineering
Federal Urdu University of Arts, Science & Technology http://www.fuuastisb.edu.pk Islamabad, Pakistan
FSc Pre-Engineering
Government Emerson College, http://www.gecmultan.edu.pk Multan, Pakistan
3 Months QHSE Professional Diploma
DAS Training Pakistan. http://www.das.com.pk
3 Days Awareness and Internal Audit Training on ISO 9001:2008 DAS Training Pakistan. http://www.das.com.pk
IELTS (Academic)
British Council http://www.britishcouncil.pk
SAP
SAP Saudi Arabia
Primavera P6
Page 2 of 4
PROFESSIONAL EXPERIENCE
Total – 6.6 Years: 4.5 years of Electrical Engineer & 2.2 Years of Testing & Commisioning Engineer. Electrical Engineer Jan 2016 to Present
Al-Shaikh Group
I am working as Electrical Engineer for Saudi Call Contracting Co. Responsibilities Preview:
Electrical System Installation, Testing & Maintenance: o Electrical Distribution Boards installation and wiring as per drawing. o Installation of power, control and instrument cables inside cable trench, cable trays and conduit. o Cabling pulling, splicing, glanding & termination work as per standards and safety system. o Making all type of grounding system.
o Trouble shooting and fault rectification planning. o Cables testing using megger & test Van. (Making cable junctions if required). o Review design drawings, shop drawings and submittals. o Participate in the MEP design process.
o Preparation of B.O.Q & L.P.O.
o Installation of Automatic lighting and motion sensors system. o Auxiliary power system (UPS, Inverters, Batteries) installation and maintenance. o Installation of Power Transformers, Switch racks, Disconnect switches, Circuit breakers, Direct Current system, Relay panels, Marshaling Racks, Remote terminal units, Instrument junction boxes, Battery chargers.
o Glanding and Termination of Power and Control Cables inside Switch racks, Disconnect switches, Circuit breakers, Direct Current system.
o Installation and commissioning of 115Kv DTCB.
o Installation & Testing of 132KV Live Tank Circuit Breaker. o Installation & FAT Test of 13.8kv MV RMU.
o Testing of DTCB, LTCD, RMU & Transformers.
o Install high voltage splices, terminations, load break elbows, dead break elbows and T-Bodies. Electrical Maintenance:
o Calibration of dosing & mixing machines (Motan). o Calibration of Robotic arms movements (Hydraulic & Pneumatic). o Installation & Maintenance of KWT auto filling & labeling machine. o Installation & Maintenance of BEKUM BA34-2 Extrusion Blow Molding Machine. o Installation & Maintenance of BEKUM BM704D Extrusion Blow Molding Machine. o Installation & Maintenance of CHIA MING Stretch Blow Molding Machine. o Installation & Maintenance of NANRONG Injection Molding Machine. o Installation & Maintenance of DEMAG Injection Molding Machine. o Installation & Maintenance of TOM liquid filling machine. o Installation & Maintenance of Weir & Harrod liquid filling machine. o Installation & Maintenance of Parker Extrusion Blow Moulding Machine. o Responsible for the troubleshooting of machine if there is any problem and complaint. o Maintenance & Trouble shooting of Hitachi, Video Jet, Markem Imaje printing machine. Building Systems:
o Preparing daily activity report via BMS operating systems. o Operating and testing all HVAC & Electrical systems via BMS monitoring system interface. o Extracting reports and observing live working of Instruments (UPS, Generator, Chillers). o Using BMS system calculations of Electricity, Water, Tenants, and other Bills. o Controlling pumps, AHU, FCU, VAV, Chiller, Exhaust system and other BMS related equipment via BMS System.
o Monitoring Security system (CCTV camera & Access Control system). Page 3 of 4
o Installation & Maintenance of fire equipment’s.
o Inspection of Fire equipment and other security systems as per Planed Preventive Maintenance. o Installation of Security Equipment such as Surveillance Camera, DVR, LCD Screen, CCTV Junction Boxes, and Access control system.
o Installation of fire alarm system, Smoke detectors, audible and visible Alarms. o Public announcement system and amplifier installations. o Supervising installation of Low Current building systems. HVAC Systems:
o Installation of HVAC system as per approved drawings. o Handling CHILLERS, AHU, FCU, DCV, VAV, and other HVAC equipment. o Cleaning of duct system as per scheduled preventive maintenance. o Perform testing of Duct joint welding.
o Installation of smoke and fire damper.
o Installation of volume control dampers in duct system. Planning & Scheduling:
o Working on SAP for MM, SD, PP to ensure the continuous production supply chain process. o Creation & Change in BOM.
o Creation & execution of process orders by assigning resources. o Estimated quantities and cost of materials, equipment, or labor to determine project feasibility. o Planning & procuring for new equipment installation to increase the productivity and capacity with minimum resources.
o Making innovation in production process by procuring advanced equipment. o Preformed production studies and machine analysis to identify quality and process problems. o Working on Primavera P6 for Planning, budgeting & scheduling of mega projects. o Prepare 2-week look-ahead schedules with Project Manager and Field Supervisor. Testing & Commissioning Engineer Oct 2013 to Nov 2015 Pak Elektron Limited http://www.pel.com.pk
I have worked as Testing & Commissioning Engineer at Pak Elektron Ltd. Responsibilities:
o To handle Operation & Maintenance Electrical works, Site work & documentation work, including making & maintain daily report, monthly reports, LPO, invoices preparing BOQ, estimation. o Responsible in handling electrical problems or electrical engineering issues at a building, work site or other location.
o Read diagrams and modify schematic drawings as instructed. o Installation of MV Metal Clad Switchgear 17.5KV/2500A. o Installation of LV 690/750V 6000A Distribution Panel. o Installation of LV PFI panel.
o Installation of AC/DC Auxiliary Services Panel.
o Installation, connection and removal of substation apparatus and equipment. o Site Supervision and Planning for termination and electrical installations. o Trouble shooting of all electrical circuits, control, power and protection circuits. o Testing and commissioning of electrical circuits, CBs etc. o Submitting daily reports to the management.
o Follows administrative procedures.
o Preparation of project related documents.
Page 4 of 4
Major Research Projects
o AMR Architecture, Electricity Theft and losses control design of 1000 Homes society. o Future Renewable Electrical Energy Development, Operation & Management. Research Includes:
Smart Grid for Error Detection & Rectification.
Energy Management
INTERNSHIP EXPERIENCE Sep 2012 to Oct 2012
Water and Power Development Authority http://www.mepco.com.pk Power System distribution and control in Multan Electric Power Company Limited Qasim Pur, Multan, Pakistan.
My role as Trainee Engineer was as follows:
o Power Line tracing for any faults.
o Monitor the moisture level in air used to fill the ACB. o Understanding the function of Power & Protection equipment installed on Substation. o Understanding the work of Instrument transformers and capacitor banks installed on substation. o Understanding the usage of switchgears and control panels installed on Substation. o Rectify the fault occur as soon as possible.
o Hourly Based Report to the Power house for IN & OUT Power on Substation. o Shutdown of Substation for Maintenance.
TRAINING / CERTIFICATIONS
o 3 Days Awareness and Internal Audit Training on ISO 9001 Quality Management System o 3 Months Quality, Health, Safety and Environment (QHSE) Professional Diploma o 2 Day Workshop on Smart Grid (Intelligent Energy Management) o 1 Day Workshop on Job Seeking & Capacity Enhancement Skills CORE COMPETENCIES
Information Technology Skills:
o MS Window xp/ Window 7/ Windows 8/ Windows 10: Currently using Windows 10. o MS Power Point: Extensive use to develop different presentations. o MS Word: Extensive use for report writing.
o MS Excel: Extensive use to make formula-based tables. o Matlab/Simulink: Extensive use for power electronics circuits. o Live Wire: Use for circuit designing.
o Proteus: Extensive use for Electronics Circuit & PCB Designing. o SPSEM Energy Meter Testing Software
o NEC ipassolink
o PLC/ SCADA
o SAP: MM, SD, PP
o Primavera p6
Contact this candidate