Electrical Engineer Engineering
Resume:
SAMSODIN B. TOMAWIS
Electrical & Instrumentation Engineer
Address: Jubail City, Eastern Province, Kingdom of Saudi Arabia Permanent Add: 0315-B Amai Manabilang St., Lumbac Madaya, Marawi City, Mindanao, Philippines Mobile No.: +966********* / +639*********
Passport No.: EB9607108
E-mail Add: ****************@*****.*** skype ID: samtomawis OBJECTIVE
To deepen my involvement in electrical engineering field, to be efficient motivator for successful team, and to contribute to the development of the company.
ELLIGIBILITY
ISO 9001:2015 Certified Lead Auditor, Certificate No. – 352*-****-** Registered Electrical Engineer, PRC License No. – 0053103 Saudi Aramco Approved Project Inspector with SAP No. – 80003656 EMPLOYMENT HISTORY
1. FAHSS TUV NORD – SAUDI ARABIA
From August 16, 2016 to present
Position: PID – Electrical & Instrumentation
Project: Jazan Economic City (Industrial Support Facilities for Jazan Refinery, City Port, and City Infrastructure)
Responsibilities:
Inspection of completed works requested for inspection at site for compliance with the specification
Inspection of electrical equipments and materials delivered at site for compliance with the project requirement and specification
Review and approval of Quality Procedures for compliance with the project quality requirements
Review and approval of Method of Statement for various activities at site
Review of Shop Drawings in support for Project Management Team
Review of Material Technical Submittal in support for Project Management Team
Review, analyze, and interpret test reports for electrical tests such as Insulation Resistance and Continuity Tests, High Potential (hi-pot) Test, etc.
Review and approval of Electrical Energization Packages for every electrical equipment
Issuance of Log Book Entries such as violation, proactive notification, and general comment for all observation at site including material issues
Issuance of Non-Conformance Report (NCR) to construction team whenever there is major deficiency in the work and material provided by the contractor
Issuance of Safety Reports whenever there are unsafe condition and unsafe act at site 2. Saudi Consulting Services (SAUDCONSULT)
From March 01 2015 to April 30 2016
Position: Electrical Inspector
Project: University Teaching Hospital (Umm al Qura University) Responsibilities:
Reviewing and approving shop drawings and/or IFC drawings through submittals
Reviewing and approving monthly invoice
Site supervision for all electrical works
Attending vendor’s presentation for material and firm approval
Attending request for inspection (RFI) to ensure successful implementation of projects
Quality assurance and control of the project as per specification
Study issued for construction (IFC) drawing and contract specification
Review materials, tools and equipment required for the project
Issuing Non-Conformance Report (NCR) to contractor whenever there is a major violation on specification
Issuing Site Instruction to push the contractor and put them on right plan and schedule
Reviewing contractor’s invoice report to verify progress on actual achievement 3. SAUDI ARAMCO TOTAL Refining and Petrochemical Company (SATORP)/ Industrial and Management Technology Methods Co. (ITM) From April 2011 to September 2012
Position: Sr. Electrical & Instrumentation Inspector Project: SATORP
Responsibilities:
Making sure the actual works at site are in compliance with IFC drawing and Project Specification.
Reviewing & Approving materials, vendor qualification, and third party laboratory.
Reviewing & Approving Procedures and Method of Statement.
Inspection of Material Receiving newly arrived at warehouse. Checking that materials are conforming to Jubail Export Refinery Project Specification. Also, Review Quality Documentation for Material Receiving.
Inspection of all construction works related to electrical and instrumentation, Make sure that the work is quality and it conforms to the Jubail Export Refinery Specification JERES, JERMS, JERSD, IEC and all applicable international codes and standards.
Taking the necessary actions whenever there is violation to JER Specification.
Issuance of Log Book Entry (LBE)
Issuance of Non-Conformance Report (NCR)
Issuance of Weekly Quality Highlight
Attending series of meetings with EPC, PMT, Engineering Core Team, Vendors and other parties involved to come up into a resolution whenever there are critical issues.
Witness all Pre-commissioning activities.
Attending walkthroughs and generating punch lists. Then closing out punch lists
Review Pre-commissioning Dossier
Signing Ready for Commissioning Certificate
4. Faysal M. Qahtani Sons Company (FMQ)
From December 2009 to February 2011
Position: QC Electrical & Instrumentation Inspector Project: On-Shore Maintain Potential (OMP) / Gas Upstream Projects SHEDGUM-UTHMANIYAH-HAWIYAH-HARAD KHUFF GAS WELLS PROJECT Responsibilities:
Identify all the crossing of pipes with other underground facilities as reflected in the drawing.
Take charge of the following works: lay-out where the excavation need and comply with Aramco Standard.
Monitor & supervise cable pulling of power and instrument cables, lay-out and install conduits for power and control cables.
Supervise the installation of galvanic anodes, pin tests, junction boxes, and exothermic welding for cathodic protection for buried pipelines as per Saudi Aramco Standards.
Supervise the installation of duct bank and runs cables for underground installations as per Saudi Aramco Standards.
Performing quality inspection of all the construction work related to electrical, making sure that the work is quality and it follows the Saudi Aramco Standards, National Electrical Codes, and other international codes and standards.
Supervise the installation, testing & commissioning of the following electrical & instrumentation equipments; Pressure Indicator and Transmitters, Temperature Indicator and Transmitters, H2S Gas Detectors, Horn & Beacon lights, Level switches, SSV Panel, Task lighting system, Panelboards, transformer, RTU & PLC Cabinets. Supervision & monitoring regarding the installation and termination of instrumentation cables from junction box going to RTU & PLC. Monitoring regarding the installation of conduits & termination of power cables.
Preparation of RFI, Loop Package, Electrical Package, Procedures, Test Reports, Pre- commissioning forms, RFI log, NCR, Technical Query (TQ), and other necessary documents required by SAPMT and SAPID.
Closing out Exception Item List (EIL). Pushing or negotiating the concerned department or crew to finish the job in site.
5. Saudi Landscape & Contracting Company (SALCO)
From June 2008 to September 2009
Position: Electrical Engineer and QC Electrical
Project: King Abdullah University of Science and Technology (KAUST) Saudi Aramco Project (BI 25-00004-002)
Responsibilities:
Arranging the daily activity on site as per project schedule
Supervising all construction works related to electrical, make sure that the work is quality and it follows the Saudi Aramco Standards, and taking the necessary actions whenever there is violation to Saudi Aramco Standards, National Electrical Codes, and other local and international codes and standards.
Preparing, submitting, and issuing of RFI (Request for Inspection) whenever it is ready.
Inspecting the electrical materials delivered to warehouse, checking its approval, and making sure that the materials comply with all applicable Saudi Aramco Standards, UL, IEC, SASO, and NEC.
Reviewing the shop drawing and IFC drawing. Making sure the actual works in site are based on IFC drawing.
Issuing of Internal-NCR to construction team for any violation in work.
Coordinating KAUST PID and construction team whenever necessary to complete certain work.
Document compilation such as Purchased Order, Delivery Note, Non- Material Report (NMR), Testing Report, Dimensional Drawings, Material Take-off of Electrical, Instrument, materials involved prior for Request of Inspection with Saudi Aramco Inspection Division (PID) counterpart.
Pre-commissioning, Commissioning, and testing all finished electrical installations.
Preparation of all the necessary documents for energization such as energization certificate, test reports, etc.
6. City Engineering Office, Marawi City
From December 2006 to May 2008
Position: Electrical Engineer
Responsibilities:
Review and/or Design the lay-out and determine the POWER LOAD calculation of residential, commercial establishments, institutional buildings, etc. and supervise in accordance with Dwg. Project specification and ANSI and other related codes and standards.
Review and/or Design the lay-out and determine the LIGHT LOAD calculation of residential, commercial establishments, institutional buildings, etc. and supervise in accordance with Dwg. Project specification and ANSI and other related codes and standards.
Interpret and implement Philippines Electrical Code (PEC) and National Fire Protection Association 70 (NFPA70) or National Electrical Code (NEC).
Monitor, supervise and inspection of operation and maintenance of electric equipments.
Checking of shop Dwg. and review of material submittal submitted by contractors
Liaison and co-ordination between contractor, clients, and government authorities. 7. British Council/Volunteer Services Overseas
From March 2006 to December 2006
Global Xchange Programme
Responsibilities:
Youth volunteer for logistic supports for Catholic Relief Services (CRS) Office and for Mindanao Peacebuilding Institute (MPI)
Teaching basic education to less privileged children of Davao
Community Services for the aged people of Bradford UK
Participating in Interfaith Dialogue, Cultural Presentation, Diversity Awareness, and Peace Campaign
8. Asea Brown Boveri (ABB)
From March 2005 to June 2005
Position: Workshop Electrical Engineer (Training)
Responsibilities:
Inspecting the electrical heavy equipments such as motors, generators, transformers, etc arrived at workshop.
Troubleshooting, testing, and repairing heavy equipments such as motors, generators, transformers, etc.
Inspecting the repaired electrical heavy equipments ready for delivery to clients.
Rewinding repairs, both rotor and stator. Cleaning, baking, and varnishing heavy equipments.
9. Fortified Association of Maranao Engineering Students (FAMES) From July 2004 to Sept. 2004 and July 2005 to Sept. 2005 Position: General Science Instructor
Responsibilities:
Teaching Chemistry, Physics, and Mathematics
EDUCATIONAL BACKGROUND
College : Mindanao State University-Main Campus, Marawi City, Philippines Bachelor of Science in Electrical Engineering
Academic Scholar (1st year - 4th year)
Consistent Dean’s Lister
Vocational : Instrumentation and Control Servicing NCII International Skills Technical Training Institute, Inc.
#804 J.P. Rizal St., Concepcion I, Marikina City
Computer Aided Drafting (AUTOCAD)
St. Laurence Institute of Technology
07-B Mariano Badelles Sr. St., Iligan City, Philippines TOP SKILLS
Designing, knowledgeable in AUTOCAD (2 & 3-Dimensional Layout), programming, DIALUX, and MS Office such as Word, Excel, PowerPoint, etc. Interests include typing, communicating, teaching, writing, and reading.
PERSONAL PARTICULARS
Age: 38 Date of birth: Jan. 3, 1982
Nationality: Philippines Religion: Islam
AFFILIATION/ORGANIZATION
Integrated Institute of Electrical Engineers (IIEE)
- Member (2013)
Global Xchange Programme (GXP) / Volunteer Service Overseas (VSO)
- Member (2006)
Fortified Association of Maranao Engineers (FAMES)
- Vice president (2003)
- Representative (2002), Member (2001)
PROFESSIONAL PROFILE
- Ability to design the lay-out and determine the POWER LOAD and LIGHTING LOAD calculation, and illumination level required for residential, commercial establishments, institutional buildings, industrial buildings, etc. in accordance with National Fire Protection Association 70 (NFPA 70) or National Electrical Code(NEC) and American National Standards Institute(ANSI).
- Be able to interpret and implement National Fire Protection Association, National Electrical Code, American National Standards Institute, National Electrical Manufacturer Association, Underwriters Laboratories, International Electrotechnical Commission (IEC), Saudi Aramco Engineering Standards and other Saudi Aramco References, and other international standards and codes.
- Be able to take charge or supervise operation and maintenance of electric equipments.
- Knowledgeable of various motor controls for efficient motor operation.
- Consultation pertaining to Electrical Engineering knowledge and calculations or applications of engineering data.
REFERENCES
Engr. Julius Maestrado Engr. Khalid Ali Murudkar
******.*********@******.*** ************@*******.***
Contact this candidate