Summary of Qualifications

More than ** years of Canadian electrical and control engineering working experience on heavy industrial projects in designing and /or modifying switchgear, substation, control room, power system, oil & gas plant protection & control scheme, control logic, relay settings & calculations, developing single & 3-line wiring diagrams, equipment layout and loop drawings, modeling & conducting power system studies, developing commissioning plan and project proposal, evaluating tender, estimating project cost & man-hour, project cost control, sizing & procurement equipment, reviewing & optimizing contractor’s and colleagues’ designs for code compliance, developing project execution plan & schedule, cost analysis, tender document and equipment specification, outsourcing capital projects, and reviewing outsourcing CWP within Utilities and Consulting Company involved in EPCM projects.

Proficient in resolving technical conflict, mentoring colleagues & juniors, self-starter, great team player, and skilled problem solver.

Skilled in SKM, ETAP, Aspen, GenCap, Enervista, IPScom, EMTP & AutoCAD software, and CSA, IEC, AESO, API, NFPA, EEMAC & ANSI/IEEE std., SAP, TapRooT, Microsoft project / Visio, Access, Excel

Experience with preparing Construction Work Packages (CWPs); develop conceptual designs, feasibility studies, proposals, prepare detailed design, supply, construction, and installation specifications.

Skill to manage multiple projects and bringing projects to a successful completion with the ability to utilize technical analysis, provide recommendations, and solve complex problems.

Core Strengths

* Electrical Engineering *Electrical Code & Standard *Industry & Building Electrical Systems *Heat Tracing & HVAC

* Detailed & Conceptual Design *Equipment Specifications *CWP, Field Check & Inspection * Project Management

* Plant Engineering *Relay- Beckwith, GE & SEL * Power system analysis * Motor starting & Harmonics analysis, Arc flash analysis *Protection scheme design, control logic, relay settings & calculation *MS Office, CADD & MicroStation

Power Generation, Substation, Oil & Gas, and Auxiliary Equipment: generators up to 435MW, induction motors, variable frequency drive (VFD), HV-LV transformer up to 500MVA, MV-LV switchgear & MCC, DC system, Fire Alarm system, MV-LV cable & tray/ trench, CT&PT, breaker/fuse, motor-operated isolator/ disconnects, AVR, NGR, Surge arresters, tap changer, cooler, HVAC, Battery & Charger, UPS, PLC/DCS/RTU control system

Achievements

Planned and managed $15m full-scale project (design, installation, and commissioning); controlled budgets and managed construction contracts.

Improved production of 15% through the implementation of the preventive maintenance program (Green Light).

Performed temporary power system design, saving $1.5M in each turnaround due to cost associated with rental CAT equipment including additional engineering.

Successfully researched, negotiated, and procured an alternative supplier after a sharp hike in prices from primary supplier, resulted in a 15% savings and in meeting project timelines.

Education and Certification

MASc in Electrical Engineering 2003 – 2006

Concordia University, Montreal, QC, Canada

Bachelor of Science Degree in Electrical & Electronic Engineering, RUET, BD 1991

PLC, Robotics, Automation, and Control Certificate – NAIT, AB 2018

Technical Writing: Procedures and Manuals, APEGA, Edmonton, AB 2016

ETAP 113 & 272 Power System Engineering Workshop, ETAP Canada Ltd. AB 2007

GE Multilin Bus, Motor and Transformer Protection, GE, Toronto, ON 2015

Testing, Commissioning, and Start-up of Electrical Systems, MAGNA IV, Saskatoon, SK 2013

Protecting Power Systems for Engineers, SEL University, USA 2012

Engineering Regulations, Codes, Standards & Project Management, Edmonton, AB 2007

AutoCAD, Lloydminster, AB 2006

Protection System Design for Transformer and Generator, Beckwith, Florida, USA 2014

Network and its security system Design – NAIT, AB 2019

Relevant Experience

E2 Consulting Ltd (www.e2consulting.ca), Lloydminster, AB May 2006 – Jan 2011 & Feb 2018-

Conducted Load Flow analysis, Short Circuit & voltage drop studies, Protection & Coordination studies, Relay curve & time dial settings, Cable pulling & thermal analysis, Optimal Power Flow & GPR analysis, Capacitor sizing for power factor improvement, motor starting and Arc Flash studies.

Planned, designed, and modified protection scheme, metering & control for transformer, busbar, feeder & generator with grounding system design.

Developed the specification & datasheet for transformer, switchgear, power cable, lightning arrestor, relay, NGR, panelboard, and Motor Control Centre (MCC) including hazardous area classification.

Performed relay settings & calculations, CT saturation & burden calculation.

Sizing standby gen-set, battery banks/ UPS, switchgear, MCC, cable, transformer, ATS, CT, PT, busbar, breakers, and feeder for primary & backup power distribution systems with their controls.

Working on Husky projects: Project management for replacing 25kV U/G cable ($25M), fifteen (15) sites Arc Flash Analysis using IEEE 1584-2018, and six (6) burners & incinerator compliance upgrade (instrumentations and piping).

Sr. Engineer, TransAlta Corporation (www.transalta.com), AB, Canada April 2012 – Jan 2018

-Developed equipment risk matrix, and an innovative & proactive solution be ready before equipment fails for reducing cost and Plant downtime.

-Prepared engineering Long Range Tech Plan (LRTP) proposals for major equipment condition improvement and undertaking equipment performance and condition assessments to optimize KPI.

-Developed equipment specification for substation & generating plant, workscope, and tender document.

-Provided proactive, innovative, and cost-effective engineering support and solutions for resolving reliability risks with a clear focus on helping meet or exceed plant KPIs including after-hour tech support 24/7.

-Developed protection scheme, control logic, relay settings & calculations based on Company/IEEE standard, coordination & arc flash analysis performed by ETAP.

-Developed turnaround/non-turnaround/routine project plan, Engineering Request (ER), Engineering Scope Document (ESD) / Front End Engineering Design (FEED), Project Scope Justification (PSJ) and prepared timely & cost-effective CWP (Construction Work Package) which including write-up, review, P&IDs, loop drawing design, panel/ cabinet wiring & AC-DC schematic drawing, cable schedule and commissioning plan for the medium to large Capex project.

-Coordinated Electrical & Control (E&C) activities with other disciplines /stakeholder to solve project issues.

-Oversaw the whole electrical team’s CWP quality complied with company code and other applicable standards (CSA/IEEE/ANSI).

-Performed electrical installation, commissioning and start-up support to ensure Plant reliable & efficient operation for Electrical and Control system.

-Implemented engineering changes and ensured they are effectively integrated into existing systems as per Management of Change (MOC) guidelines.

-Analyzed the root cause for failure, solution & trouble-shoot for process system, equipment problem, and daily Power system’s issues.

-Involved in cost study, tendering & outsourcing some big projects to outside EPC consultants.

-Reviewed, optimized, and approved the EPC contractor’s designs & drawings, and vendor’s drawings.

-Monitored the E&C installation to ensure code/standard compliance with the design and the drawings.

-Managed and monitored external engineering consultants to complete engineering deliverables timely for capital, outage, and non-routine maintenance projects.

-Evaluated, selected, and applied the engineering techniques, procedures & criteria utilized in equipment performance monitoring and diagnostics.

-Identified engineering opportunities to reduce risk and/or reduce costs to enhance plant productivity, reliability, quality, safety, and environmental performance.

-Provided engineering solution/expertise/assistance to solve complex problems in the design, application, operation, inspection & maintenance of power systems and OEM equipment for Operation/ Maintenance Department 24/7 issues.

-Provided input to operation and maintenance annual plans and long-range focus (LRF), budgets as well as to capital replacement and upgrade projects to attain required future availability and reliability levels.

-Provided technical review, direction & approval for large or complex overhaul, shutdown, or turnaround maintenance scopes and tasks.

-Provided engineering, project management & leadership skills within a multi-discipline environment/ stakeholders consisting of Engineering, Maintenance, and Operation group.

-Developed workscope proposal, execution plan, schedule, project cost control, and managed stakeholders & outsourcing projects within the approved budget.

-Liaison to the project personnel for input and review of EPCM electrical designs related to large projects

-Identified project critical path, risks, and possible impacts /outcomes on the schedules and project cost.

-Ensured the consistent application of company design standards, processes and equipment guidelines, IEEE, Canada, and Alberta Electric Codes and Standards.

Electrical Lead, ONEC Group (www.onecgroup.com), AB, Canada Feb 2011 – March 2012

Reviewed, prepared, and submitted tender documents and estimated project engineering man-hours.

Reviewed, red marked-up and developed RFQ, vendor quote and cut sheets, purchase requisition (PR), IFT, IFA, IFC & As-built package.

Reviewed and designed grounding grid and bonding system of sub-station, fence, transformer pad, and MCC building.

Reviewed area classification documents, sizing gas detector, detector’s settings.

Developed the specification & datasheet for transformer, switchgear, power cable, lightning arrestor, relay, NGR, VFD/Starter, and Motor Control Centre (MCC).

Sizing switchgear, MCC, cable, transformer, ATS, UPS, CT, PT, busbar, breakers, VFD/Starter, and feeder.

Modeled and conducted Load Flow analysis, Short Circuit studies, Protection & Coordination studies, Relay curve & time dial settings, Optimal Power Flow analysis, Capacitor sizing for power factor improvement, Motor starting and acceleration study and Arc Flash studies using ETAP and SKM.

Mentored juniors and colleagues.

Senior Application Engineer, Dhaka Electric Supply Company, Dhaka, Bangladesh 1999~2001

Designed and modified sub-stations which include

Designed protection and control schemes for Transformer, Bus-bar, Feeder; Relay settings and calculation, CT saturation check, and burden calculation.

Developed specification and sizing PFI plant, Switchgear, Circuit Breakers, CT, PT, Relays, Lightning Arrestor, Isolator, and Energy Meters.

Designed 1-line & 3-line diagram, AC & DC schematic diagram, protection and metering drawing, DC Logic, sub-station annunciation diagram.

Executed startup and commissioning plan for transformer, switchgear, and substation.

Prepared Spare Parts Inventory for the repairing works and implementing the project within the time frame, developing documentations & deficiency lists and turn over documents.

Resolved technical conflicts and coordinated works between field and office.

Electrical and Junior Engineer, Rural Electrification Board, Dhaka, Bangladesh 1992~1998

Designed and modified protection scheme for busbar, transformer & feeder, relay setting, calculations & coordination.

Performed FEED & detail engineering, prepared DBM/AFE, material planning & specifications, RFQ, PR, IFC, as-built package, and project’s documentation.

Commissioned and startup substation with HT, LT switchgear, PFI Plant, ATS, and CB/ACR.

Calculated manually short circuit level, voltage drop calculation & size of PFC.

Executed planning, scheduling, prioritizing, project management, supported the technical team on the site through all phases of the project execution and meet the deadline.

References

References are available upon request.

Contact this candidate