Shishir.Y.K. Mobile: +971*********

Mechanical Draughtsman E-mail: adcz1g@r.postjobfree.com

SUMMARY

11+ years of experience in Piping, Equipment, Pipe support & Fabrication drawing/modeling by implementation of Piping engineering standard for Waste Water & Sewage treatment facility, Sea water desalination plant, De-oiling plant, Waste water recycle & reduction Plant, odor control unit

Proficient in, AutoCAD2019, AUTOPLANT-V8, PDMS & Navis works.

Knowledge of technical standard such as ASME, ANSI, API, DIN & BS

TECHNICAL SKILS

Good at preparation of piping and equipment GA following the concept of safety, maintainability and operability conditions.

Preparation of Nozzle orientations drawings for equipment.

Preparation of pipe M.T.O.

Proposing of temporary Platforms, Ladders, Pipe Rack for Access, Maintenance & Safety.

Modelling of equipment as per vender data & Piping considering for maintains and operating space.

Clash check, model review, inters discipline co-ordination.

Isometrics extraction and data consistency check.

Providing tie in point for Pipeline Department/under others scope.

Preparation of piping and equipment GA using PDMS draft.

Job Profile:

1) From Aug 2018 to Till Date

Working as a Mechanical Draftsman in Corodex Industries, Abu Dhabi.

Projects and nature of work:

1 Project: Pumping Station.

Clients: 1.Tamdeen 2.Al Quabda 3.Mumzar

2 Project: Wastewater Treatment Pant.

Clients: 1. Rothsay Goldmine Australia. 2. Presidential Guard commando. Abu dhabi.

3. Pesco Yemen

3 Project: Sewage Treatment Plant (MBR Technology).

Clients: 1.Tawazun Industrial Park. Abu Dhabi. 2. Outlet mall Dubai.

4 Project: Sea Water Treatment UF, RO Plant).

Client: 1.Presidential Palace. Abu Dhabi. 2 Presidential Guard commando. Abu dhabi

5 Project: Sewage Treatment Plant

Client: 1.Nasma Residences.Sharjah. 2. Jafsa south Dubai. 3. Hamala Bahrain.

Responsibilities:

Preparation of Plot plan, Equipment layout, GA Drawing, Piping layout & Shop Drawings for different system like Aeration tank, MBR, UF, Reverse Osmosis, Sludge Area, Combi unit & MMF unit etc

Preparation General arrangement drawings & Detail views for Pumping station.

Preparation of Fabrication details for GRP piping. Pipe support & Boq for the same.

Preparation of GA &Fabrication Drawing for Container having machine room, STP facility, Uf & ro Facility inside the High cube container.

Generation of isometric schemes for Aeration, MBR, Anoxi Blower area, Order control unit, UF Air compressor unit. .

2) From Sep 2016 to April 2018

Working as a Design Engineer in Axil consulting Engineers

Projects and nature of work:

Project: Aurum 10KL & Brew House Goa.

Client : Elephas Engineering and projects Pvt .Ltd

Responsibilities:

Preparation of 2d GA drawings for Process equipment’s like Pressure vessels, LT, WP MCV & Tanks etc. 3D modelling of Piping & Equipment’s.

Preparation of Fabrication drawings for supports etc.

Preparation of Plot plan, Equipment layout, Equipment Drawing & Detail views for different system like Unit Tank, BTT, Utility area Etc.

Projects and nature of work:

Project: Britannia, ITC, Indus, Sogifi, Bayars & smith and zoom

Client: Rajath material Handling System Pvt Ltd

Responsibilities:

Preparation of Plot plan, Equipment layout, Equipment Drawing & Detail views for different system like Receiver hopper, feed hopper, Blender, Roster, Dust collector & Mixer

Preparation of Equipment Drawing, MTO Extraction,

Generating documents such as General arrangement drawings, Laser cutting drawing, and Development Drawing for Hopper & shell

Preparation of Drawings such as piping GA & isometric for Hopper System, Fabrication details for SS piping, supports & interconnecting piping between different units.

3) From Dec 2012 to Aug 2016

Working as a Mechanical Draftsman in METITO (OVERSEAS) WLL, QATAR

Projects and nature of work:

1 Project: Second phase expansion of industrial area STF.

Client: Ashghal, Qatar

2 Project: Package sewage treatment plant.

Client: Barwa Al Khor Housing Development, Qatar

3 Project: Wastewater recycle and reduction project.

Client: Qatar gas Operating Company, Qatar

Responsibilities:

Preparation of Plot plan, Equipment layout, Equipment Drawing & Detail views for different system like MBR, Reverse Osmosis, Sludge Area, Sand filter & De oiling unit such as LP Sour, Oily water & MMF unit.

Preparation of Nozzle orientations drawings for equipment.

Preparation of Drawings such as piping skid for all vessels, Fabrication details for SS piping, Skid & supports Drawing, interconnecting piping between different unit.

Generating documents such as General arrangement drawings, Equipment layout, and Piping layout for the different units like Aerobic Digester, OCU unit, FEPS unit, UF Feed tank & ASBR Tank.

Generation of isometric schemes for SBR Blower area, Order control unit, UF Air compressor unit.

Preparation of BOM for DI piping, SS piping, with reference to Piping GA

Modification of Piping layout, Equipment layout & all documents required for construction as per Client Mark up till the final approval.

4) From Nov 2011 to Nov 2012

Worked as a CAD engineer (piping) in DESMET BALLESTRA INDIA PVT LTD

Projects and nature of work:

1 Project: Teabug

Client: Desmet Ballestra Belgium

2 Project: Gusden

Client: Lipotech Project Engineering PTE LTD

3 Project: Lica (Olam projects, Zambezi)

Client: Olam international

4 Project: Diatri

Client: OFC (Oil & fats consulting) Zahraa, Libya.

Responsibilities:

Equipment modeling like filters, pumps Storage Vessels, etc using AutoPlant XM Software

Modelling of piping for different system like filtration unit, Deodorizer unit etc.

Generation of isometric schemes for stress lines like hp condensate, steam lines from Deodorizer equipment.

Generating documents such as General arrangement drawings, Equipment layout, and Nozzle orientation sheets for the different mechanical equipments, Piping Layouts, isometrics, special support sketches, etc

Checking Interferences in Piping as well as Equipment Layout.

Extraction of 2d drawings (isometric schemes, GA drawings) in AutoCAD Draft familiar with Labeling, 2d drafting, dimensioning applications.

5) From Jan 2011 to Nov 2011

Served as a Designer (Piping) in MOLD-TEK TECHNOLOGIES LTD Hyderabad

(Deputed to Saipem India project ltd. Chennai)

Projects and nature of work:

Project: Booster Station 171.

Client: Kuwait oil company (KOC)

Responsibilities:

Modeling of Equipments, Piping as per layout in PDMS

Modification in Piping as per Client Mark up in HP and LP Compressor area

Extraction of Isometrics and MTO reports.

Extraction of GA for pipe rack and marking loads as per stress input

Modelling of Escape Route and Access way for Different areas

Conceptual 3D modelling of Primary and Secondary structures, Gratings, Platforms,

Staircase, Ladders, which will be the input for Structural Department

6) From May 2009 to Jan 2011

Worked as a Designer (Piping) in CONVERSE TECHNOLOGIES PVT LTD, Hyderabad.

Projects and nature of work:

Project: NGL-1, NGL-2, NGL-3, NGL-4, Terminal and Tank form.

Client: Qatar Petroleum Ltd.

Responsibilities:

As-Build Piping routing of large bore as well as small bore lines using Auto PLANT.

Modeling of Equipments as per Equipment Layout.

Piping support adequacy checks, integrity of the equipment under revised conditions.

Study of Process P & ID & Utilities P & ID.

Plant review and checking for system by using Project Navigator, Navis Work. .

Extraction of 2d drawings (Like support drawings, GA drawings) in AutoCAD Draft familiar with Labeling, 2d drafting, dimensioning applications.

7) From July 2006 to April 2009.

Served as Product Designer in COMPOSITE TECHNOLOGIES PVT. LTD. Tumkur (Karnataka state).

Projects and nature of work:

1 Project: Operator console

Client: TATA POWER-Bangalore

2 Project: 15 TO 25 KVA & 30 TO 62.5 KVA-GENERATOR ACOUSTICS

Client: Powerica Ltd., Bangalore

3 Project: Tejas Networks

Client: M/S. Tejas Networks India Pvt. Ltd, Bangalore-78

Responsibilities:

Converting conceptual drawing to 3D model, assembly in CATIA V5.

Solid modeling, surface modelling, sheet metal, Rendering, assembly and drafting.

Preparing detailed Manufacturing Documents consisting of engineering drawings, Bill of material

Leading the prototyping activities till customer approval

Implementation of contractual requirements and various Standards / to ensure error-free engineering

COMPETER SKILS

Design Software: PDMS12.0.SP4, AUTOPLANT-V8i, AUTO CAD-2017

NAVIES WORK, NAVIGATOR V8I.

ACADEMIC QUALIFICATION

Diploma in Mechanical Engineering with First class in the year 2006 from State Board of Technical Education, Bangalore (Karnataka state).

PERSONAL PROFILE

Marital Status : Married

Date of Birth : 14th July 1984

Passport No : T1935576

Contact this candidate