Power Plant Project
Resume:
HERMINIO MANCILLA MANALO
Manghinao Proper, Bauan, Batangas, Philippines, 4201 099*-***-****••adcp40@r.postjobfree.com
Summary
A well experiences Pipe Fitter effective in resolving issues and achieving challenging goals, with excellent work ethics and time management expertise. Easily adopt on working environments and manages assignment thoroughly on time and within budget.
Highlights
Accurate and precise
Codes Expertise
Pipe Fabricator
NC II Accreditation for Pipe Fitting
Skilled and knowledgeable in all aspects of Pipe Fitting
Experiences
Pipe Fitter September 5, 2018 up to present
Mitsubishi Hitachi Power Systems San Roque, Bauan, Batangas
Tanjung Project
Fabricate boiler parts.
Layout and cut boiler parts to its cutting line.
Analyze the given drawing.
Perform Mig welding
Structural Fitter May 16, 2017 up to September 22, 2017
Atlantic Gulf & Pacific Co., of Manila Inc. San Roque, Bauan, Batangas City
Petron Project Philippines
Layout, fit, and fabricates metal components to assemble structural forms, such as machinery frames, bridge parts, and pressure vessels through tack-weld, using knowledge of welding techniques, metallurgy, and engineering requirements.
Performs tack-weld, using FCAW (Flux Core Arc Welding) or gas-shielded arc welding equipment.
Inspect assembled vessels and individual components, such as tubes, fittings, valves, controls, and auxiliary mechanisms, to locate any defects.
Lay out plate, sheet steel, or other heavy metal, and locate and mark bending and cutting lines
Locate and mark reference points for columns or plates on platform foundations, following blueprints and using straightedges, squares, transits, and measuring instruments.
Position, align, and secure structural parts and related assemblies to platform frames, tanks, or vats of pressure vessels, following blueprints.
Observe and follow safety rules and regulations at all times.
Strictly follow the Job Hazard Analysis and Job Safety Analysis in performing tasks.
Pipe Fitter October 2015 to January 2017
Atlantic Gulf & Pacific Co., of Manila Inc. – Cabinda, Angola
Mafumeira Sul Project – Chevron DSME Offshore
Performs tack-weld, using FCAW (Flux Core Arc Welding) or gas-shielded arc welding equipment.
Welds short beads at points specified by layout, welding diagram, or by FITTER I, along overlapping edges of metal parts to hold parts in place for final welding.
Comply with all pluming codes throughout the duration of the project.
Work with certified Pipe welders by providing accurate pipe preparations and fittings.
Inspect structures to avoid any obstructions and delays throughout the project.
Install a variety of valves and fittings.
Secure pipe to structures with clamps, brackets and hangers.
Plan pipe system layout, installation or repair according to specifications.
Inspect assembled vessels and individual components, such as tubes, fittings, valves, controls, and auxiliary mechanisms, to locate any defects.
Read blueprints to determine appropriate materials and procedures for each project.
Pipe Fitter January 27, 2014 to November 16, 2014
Atlantic Gulf & Pacific Co., of Manila Inc. – South Nemba Extension Project-CHEVRON Daewoo Ship Building &Marine Engineering OFFSHORE - Cabinda, Angola
Layout, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems.
Plan pipe system layout, installation or repair according to specifications.
Inspect assembled vessels and individual components, such as tubes, fittings, valves, controls, and auxiliary mechanisms, to locate any defects.
Lay out plate, sheet steel, or other heavy metal, and locate and mark bending and cutting lines
Locate and mark reference points for columns or plates on platform foundations, following blueprints and using straightedges, squares, transits, and measuring instruments.
Position, align, and secure structural parts and related assemblies to platform frames, tanks, or vats of pressure vessels, following blueprints.
Observe and follow safety rules and regulations at all times.
Strictly follow the Job Hazard Analysis and Job Safety Analysis in performing tasks.
Performs tack-weld, using hand, submerged, or gas-shielded arc welding equipment.
Welds short beads at points specified by layout, welding diagram, or by FITTER I, along overlapping edges of metal parts to hold parts in place for final welding.
Structural Fitter July 05, 2012 up to December 10, 2013
Atlantic Gulf & Pacific Co., of Manila Inc. - San Roque, Bauan, Batangas City,
GLNG BECHTEL Project Philippines
Erection of beams, panel and structures.
Fabricate hand rails, install gratings and others.
Layout and cutting of different structures
Analyze and fabricate structures according to its drawing
Installation of pipe spool and erection
Installation of pipe support in correct location
Locate the right position of the material for the installation of pipe support and guide for the fit up of pipe and fittings both large and small bore
Proper housekeeping on work area
Pipe Fitter January 12, 2012 to April 15, 2012
Atlantic Gulf & Pacific Co., of Manila Inc. – San Roque, Bauan, Batangas City,
IBEC Project (Isabela Bio-Ethanol & Cogeneration) Philippines
Erection of beams, panel and structures.
Fabricate hand rails, install gratings and others.
Layout and cutting of different structures
Analyze and fabricate structures according to its drawing
Installation of pipe spool and erection
Installation of pipe support in correct location
Locate the right position of the material for the installation of pipe support and guide for the fit up of pipe and fittings both large and small bore
Proper housekeeping on work area
Pipe Fitter / Duct Fitter June 25, 2011 to November 19, 2011
Kentz Engineers & Contractors Madagascar, Africa
Ambatovy Nickel & Cobalt Mining Project
Install boilers, containers, and other structures.
Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
Hammer, chip, and grind work pieces in order to cut, bend, and straighten metal.
Layout and examine metal stock or work pieces to be processed in order to ensure that specifications are met.
Observing, receiving, and otherwise obtaining information from all relevant sources.
Observe and follow safety rules and regulations at all times.
Pipe Fitter May 25, 2010 to October 11, 2010
Atlantic Gulf & Pacific Company of Manila Inc. San Roque, Bauan, Batangas, Philippines
Foster Wheeler (British Petroleum Project)
Pipe Fitter November 19, 2008 to November 5, 2009
Hyundai Engineering & Constructions Co., Ltd. Fahaheel, Kuwait
KUSU Project Power Plant
Pipe Fitter September 9, 2007 to November 19, 2008
Hyundai Engineering & Constructions Co., Ltd. Fahaheel, Kuwait
KNER Project Ethane Recovery
Pipe Fitter April 4, 2006 up to September 5, 2007
Atlantic Gulf & Pacific Company of Manila Inc.
San Roque, Bauan, Batangas, Philippines
Layout and cutting of pipes
Align the different kind of pipe spool
Installation of different kind of fittings
Erection of spool on the erection site
Receives details and specifications and follow work procedures.
Analyze and fabricate structures according to its drawing
Locate the right position of the material for the installation of pipe support and guide for the fit up of pipe and fittings both large and small bore
Follow safety rules and guidelines to observe safety into the work place.
Cleanliness and proper housekeeping.
On the Job Training
JERSA Industrial and Marine Corporation San Roque, Bauan, Batangas
April 1997 - June 1997
Education
Pablo Borbon Memorial Institute of Technology S.Y. 1996-1997
Bachelor of Industrial Technology Rizal Ave., Batangas City
Major in Mechanical Technology – Undergraduate
Bauan High School S.Y.1995-1996
Bauan,Batangas
Manghinao, Elementary School S.Y.1991-1992
Manghinao Proper, Bauan, Batangas
Personal Data
Date of Birth : July 28, 1979
Place of Birth : Manghinao Proper, Bauan, Batangas
Parents : Pastor Manalo
Maxima Manalo
Gender : Male
Marital Status : Married
Religion : Roman Catholic
Height : 5’7”
Weight : 140 lbs.
Spouse : Arlene M. Manalo
Children : Al Kraven M. Manalo
Kim Alexandra Manalo
Andrea Kassandra Manalo
Character References
Mr. Chito Adviento Project Manager Atlantic Gulf & Pacific Company of Manila Inc.
Mafumeira Sul Project – Chevron DSME
Cabinda, Angola
Mr. Gerry Castillo Project Supervisor
Atlantic Gulf & Pacific Company of Manila Inc.
San Roque, Bauan, Batangas, Philippines
Contact No. : 099*-***-****
Contact this candidate