HUGH V. BUI

**** ***** **** ***** • Haymarket, VA 20169 • 856-***-**** • adcooo@r.postjobfree.com

ELECTRICAL ENGINEER – SYSTEM DESIGN ENGINEER – MEASUREMENT & TESTING ENGINEER

Extensive experience in system design, analysis, development, integration, administration, measurement, and testing. Special expertise in prototyping, diagnostics, and troubleshooting. Excel at analyzing complex electronics schematics to determine functionality and design performance. Experienced in the verification of Aircraft, Sensors and Imaging, and Air and Missile Defense Subsystems. Strong defense/federal project background. Highly knowledgeable in flight control system theory and systems engineering processes and procedures. Excellent problem-solving skills. Hold Active DoD Secret Security Clearance and MS in Engineering.

Core Competencies:

Analysis – Requirements Determination – Customer Relations – Electrical Design – Systems Testing

Prototyping – Project Management – Team Leadership – Diagnostics – Process Optimization – Quality

Research & Development – Technical Documents – Troubleshooting – Performance Monitoring

PROFESSIONAL EXPERIENCE

FIBERTEK, INC., Fort Belvoir, VA 10/2019 – 02/2020

Biometrics Interoperability & Systems Compliance Office (BISCO) Senior Engineer

Provided user testing support for the Next Generation Biometrics Capability Collection (NXGBCC) Phase II. NXGBCC will be the DoD’s device to replace the legacy Biometrics Automated Toolset-Army (BAT-A) systems in theater. Comprehensive system testing will enable the Program Manager (PM) to determine if systems are meeting requirements for fielding decisions.

Supported includes writing test plan, test scripts and executing test scripts against the requirements of the NXGBCC Capability Development Document (CDD) for selected Phase II vendor systems.

Maintained test data.

CACI INTERNATONAL, INC., Fort Belvoir, VA 04/2019 – 09/2019

Night Vision & Electronic Sensors Directorate (NVESD) BISCO Senior Systems Engineer

Planned, developed, tested and analyzed diverse engineering systems; designed, investigated, and evaluated devices, sensor elements and other associated equipment. Responsible for evaluating and preparing system engineering and technical analyses; documents, proposals for change, and other technical documentation. Utilize system engineering experience in carrying out functions, including configuration and resource management, quality assurance, and system integration, acquisition, and testing.

Integrated and assembled of various electronic sensor and component to create functional systems.

Analyzed the customer specifications towards the development of electronic test plans.

Created pre-design verification, design verification (DV), and process validation (PV) test plans.

Created test equipment specifications and test hardware specifications used in the development of automated test rack systems.

Defined and coordinate the building of test equipment.

Executed design verification testing, analyze and interpret test data results from verification and validation testing, and prepare and generated technical reports in the desired customer format for use by engineering and management personnel.

Worked with team members to ensure complete test coverage of all requirements.

Hugh V. Bui • Page 2

Supported product technical design reviews and present test results to customers.

Provided technical information and documentation to others in a clear, precise, and timely manner (Test reports, test data, test results).

Used quantitative measures/indicators in analyzing problems, developing recommendations, and making decisions.

Accurately identified the most significant data/variances (e.g. "bad data"; high impact data).

Utilized an issue documentation system in an efficient manner to communicate test failures to the product team members.

AEROTEK, INC., Fort Belvoir, VA 12/2018 – 03/2019

BISCO Test Engineer

Provided user testing support for the Next Generation Biometrics Capability Collection (NXGBCC) Phase II. NXGBCC will be the DoD’s device to replace the legacy Biometrics Automated Toolset-Army (BAT-A) systems in theater. Comprehensive system testing will enable the Program Manager (PM) to determine if systems are meeting requirements for fielding decisions.

Supported includes writing test plan, test scripts and executing test scripts against the requirements of the NXGBCC Capability Development Document (CDD) for selected Phase II vendor systems.

Maintained test data.

THE RAYTHEON COMPANY, Tewksbury, MA 2016 – 12/2018

Senior Electrical Engineer II

Carried out the design, development, testing, and support of critical Fixed Station Sensors Modernization and Integration (FSSM&I); US Army, Qatar, Taiwan and Japan Patriot (PAT). Created system models for the Integrated Defense System (IDS) 140 S-Band Radar (SBR) and X-Band Radar (XBR); Transmit/Receive (T/R) Radio Frequency (RF) Head using DSI International’s eXpress and Workbench software tools to perform diagnostic dependency modeling.

Supported RF systems, subsystems, Circuit Card Assembly (CCA), Line Replaceable Unit (LRU), Line Replaceable Module (LRM) and Line Replaceable Component (LRC) that comprise of the RF Microelectronics Analog and Digital Circuit by providing testability modeling/analysis, troubleshooting and diagnostics.

Completed testability modeling/analysis, troubleshooting for the SBR Signal Processor Subsystems (SPS) Cabinet, Infinite Band (IB) Switch, Qatar PAT; and Taiwan Converter, Inverter, Converter Bridge CCA, Square Wave Inverter, and Low Power Radio Frequency Amplifier (LPRFA); and Japan PAT RF Jammer, Doppler Converter and Insertion, Narrow Band (NB) and Wide Band (WB) Target Generator.

Met Fault Detection (FD) and Fault Isolation (FI) for the SPS Cabinet and IB Switch Requirements.

Supported the Qatar PAT Preliminary Design Review (PDR) and the SBR Critical Design Review (CDR).

Completed testability modeling/analysis, troubleshooting for the XBR and T/R RF Head product line.

Reviewed and updated testability modeling/analysis, troubleshooting for the SBR Calibration Radar Modular Assembly (CAL RMA), XBR Output Microwave Assembly (OMA) and Power System.

Hugh V. Bui • Page 3

THE UNITED STATES PATENT & TRADEMARK OFFICE, Alexandria, VA 2015 – 2016

Patent Examiner

Reviewed patent applications in the Electrical Measuring and Testing field. Conducted searches on related technologies and analyzed inventions vs. similar designed issues on prior patents. Verified compliance with basic layout, rules, and legal requirements.

Completed a comprehensive evaluation of a new electrical technology.

THE BOEING COMPANY, Philadelphia, PA 1999 – 2014

Engineer/Scientist

Carried out the design, development, testing, and support of critical aircraft and weapons systems. Supervised project teams. Reviewed customer needs and developed requirements. Monitored workflow, formulated process improvements, and instituted critical changes. Conducted Flight Control System (FCS) Portable Maintenance Aid (PMA) Instrumentation Package (PIP) requirements determination, DIAS entry, compilation, linking, functional test processing, and test routines (Integrated, test, and debug). Held responsibility for the FCS topology/functionality, using eXpress tool to perform diagnostic dependency modeling.

Successfully completed the RAH-66 Comanche Demonstration/Validation Prototype Program Milestone II FCS Diagnostics Assessment.

Achieved the goal of 98% compliance with assigned diagnostics and testability milestones.

Demonstrated 80% of Production Weapon System Specifications (PWSS) FD & FI performance requirements for the FCS.

Authored troubleshooting tasks for a high-profile Interactive Electronic Technical Manual (IETM).

Prepared the Diagnostics Design Requirements Analysis Guide (DDRAG) and assisted with flow down for the Weapon System Design Document (WSDD), Mission Equipment Package (MEP), and FCS specifications.

Improved efficiency by developing common processes between Ground Support Equipment (GSE), Diagnostics, Testability/Reliability/Availability/Maintainability (RAM), and other Supportability disciplines.

Identified and managed the FCS Failure Mode Effect and Criticality Analysis (FMECA) fields LRU/LRM, On-Board & Off-Board tests (PMA/PIP, Manual, Lambda Search), and Detailed Software Requirements Specifications (DSRS).

Formulated the FCS PIP/Diagnostic Engine Automated/Manual test requirements.

LORD CORPORATION, Erie, PA 1996 – 1999

Senior Test Engineer

Programmed and edited profiles and developed instructions for complex, high-visibility projects, including M-Timer Card for the Falcon Controller, NVX-LT61 Switch Box, and NVX Circuit Board. Tested and analyzed hardware and software for NVX systems (noise cancellation systems).

Improved quality and performance and ensured all specifications were met by identifying hardware and software issues and carrying out modifications or redesigns.

Constructed analog and digital circuit boards to generate waveforms for damping machines.

Configured and debugged test machines to support multiple projects.

CAREER NOTES: Previously held Design & Test Engineer positions at ESC MANUFACTURING, INC. and CYBERTECH, INC. Details available on request.

Hugh V. Bui • Page 4

EDUCATION

MS in Engineering Science

The Pennsylvania State University, Great Valley, PA

BS in Electrical Engineering

The Pennsylvania State University, University Park, PA

TRAINING

Boeing High Potential Program

Toastmasters Club

Counterintelligence Awareness and Security Brief

DoD Cyber Awareness Challenge

Intellectual Property (IP)

TECHNICAL SKILLS

MS Office Suite, Oracle, LabVIEW, LabWindows/CVI, TestStand, MATLAB, Adobe Illustrator, DSI eXpress and Workbench, Basic, Fortran, C, Assembly Language, Falcon Controller, NVX-LT61 Switch Box, NVX Circuit Board, NVX Noise Cancellation Systems, MTS 406 Analog Controller, MTS 442 Signal Conditioner, Material Testing Generators, Dynamic Signal Analyzers, Vector Network Analyzer (VNA)

Contact this candidate