Electrical HILS

Ishak Oduvan Kunnummal

+1-313-***-****, *** Watkins Glen Blvd, Marysville, OH, 43040

********@*****.*** [linkedin]ishak

Summary Electrical and Computer Engineering Graduate student,now working as Electrical HIL Test Engineer in Honda R&D Americas. Inc, Raymond, USA, and Prestigious GTA scholar ship holder from Wayne State University with M.Tech from IIT Roorkee with combined experience as Software Automation Engineer, Instructor, Digital Design engineer, Application Engineer(Software Test). Strong Hardware and Software skills in Electrical Design Systems, CAN, CANoe simulation, SPICE analysis, Circuit simulation and e cient programming in Python, C++ and Project Experience in Linux systems and embedded platforms, and strong interest to work in a multidisciplinary team involved in the design and development of Autonomous systems from speci cation to design, prototype, develop and connectivity to life.

Technical

Skills Programming Languages: PYTHON, C++, SHELL, PERL, TCL, CAPL, Verilog, VHDL,

Software Packages: Control Desk, Automation Desk, Con guration Desk, RTI Models, MATLAB, Simulink, CarSim, INCA, EMCS, CANoe, CANalyzer, Labview, XILINX, Circuit Maker, Multisim, SPICE, CADENCE VIRTUOSO,

Operating Systems: Windows 10, XP/2000/7, Linux, DOS,

Microsoft O ce: Word, Excel, PowerPoint,

Framework and Hardware: dSPACE Platforms, HIL/RTI architecture, IBM Engineering Work

ow Management Tools, OpenCV, DFMEA, CAN LIN, Soldering, Bootstrap, interfaces, Arduino, Raspberry Pi, Bluetooth, IoT,

Others: Cadence, Orcad, SPICE, Altium, PCB,

Education Wayne State University, Detroit, MI, USA Graduated Jan. 2019 Dual Degree-Masters, Electrical Engineering CGPA = 3.96/4 Specialization: Electrical and Embedded systems.

Indian Institute of Technology Roorkee, India June 2014 M.Tech., Electrical and Circuit Design Engineering CGPA = 7.78/10 Specialization: Electronics and CAD Design.

National Institute of Technology Calicut, India May 2011 B.Tech., CGPA = 6.72/10

Specialization: Electronics and Embedded Design.

Course work Microprocessors and Micro-controllers,Embedded Systems for Vehicular N/W, Data Structures and Algorithms, Fuzzy Systems, Digital/Analog circuit design, Digital/Analog Design, Device and Circuit Simulation, Layout Design and Testing with CAD tools. Embedded programming with ARM Cortex M4 and 68HC11.

Professional

Experience

Honda R & D Americas, Inc, Raymond, USA

Electrical HIL Test Engineer April. 2019 { Present

Assignments: Working on Full System Vehicle Hardware In Loop (HIL) Test Systems including Power-Train and Chassis Bench design for ECU Testing with di erent V cycle levels of Software. Additional responsibilities involve FSA/FMEA(Fail Safe Action and Failure Mode Analysis) Automation and Model implementation and post processing, 4WD, VSA and Brake systems ECU Flashing and testing, ControlDesk implementation of Plant Control System Model Layouts and Data Capture with INCA, CANalyzer con gurations for CAN Veri cation and CAN Modeling with dSPACE tools integrated to MATLAB with Simulink. Working on the ADAS feature and Dynamic Motion Control testing of ACC, CMBS, LSF and LKAS with integrating CAMERA and Radar to the bench. .

Valeo North America, Inc., Troy, USA

Software Automation Test Engineer May. 2018 { March 2019

Assignments: Working on GM Vision projects and Embedded test automation tools, Vehicle Testing and Validation, Software quality reporting and releasing automation tools, Glue ware for integration of existing tools and new tools especially with pipeline jenkins. Complete Software and System building and releasing Automation from Software build, Flash, Smoke Tests, Stress Tests are done and Report, Data logging, Testcase generated and Analyzing DID and DTC’s. Working on and developing the new Automation Libraries to schedule, dispatch, execute and output report the whole process and implementing plugins for testing in python. Working with Programmable power supplies, Camera modules, Epiphan, Vector CANCASE, CANoe Simulation, ECU modules for vehicle testing and release. Working with di erent teams within Valeo to create TestCases for the customer needs and Testing in di erent Scenarios like Blue Screen issue. Wayne State University, Detroit, USA

Instructor Aug. 2016 { August 2018

Assignments: ECE 4340 - MicroComputer and Instrumentation NI Labview Lab (Fall 2016)

& ECE 3300 - Introduction to Electrical Circuits (Assembled new circuits, Tested and Used Altium for PCB wiring and simulation, lab equipment including oscilloscope, function generator, DC power supply and Multimeter was used in the course, Multisim was used to test electrical circuits, Winter 2017, Summer 2017) & ECE 3620 Introduction to Microprocessors and Micro-controllers(Wytech EVB Plus Board with M68HC11 processor is used to do Assembly programming,Fall 2017, Winter 2018)

Teaching Assistant: ECE6660 - Introduction to VLSI Design& ECE 3330 - Electrical Circuits II (Fall 2016))

ANSYS Inc., Bangaluru, India

Application Engineer I July. 2015 { July 2016

IC Chip Package Co-Analysis and voltage drop identi cation

IO package Reliability,thermal performance, and EMC

Worked closely with di erent customers like TI, Qualcomm, MediaTeck etc.

Projects: PE Regression (System Test) Analysis for di erent versions of RedHawk Software(Scripting) full Linux based systems with python scripting.

Testing and Veri cation of the RH Software for di erent features, gave feedback and suggestions to Development team to improve the features.

DXCorr.Inc, Bangaluru, India

Digital Design Engineer I Nov. 2014 { Jul. 2015

Projects: Fugaku 28hpm 128Mb SRAM memory analysis for low voltage DC circuits and digital circuit design utilizing CADENCE software, create drawings and con rm design and worst case analysis.

Design of Koggestone 64 bit adder for Fibonacci 2R1W memory schematic design and other relevant drawings and simulation,

Academic

Experience and

projects

Wayne State University, Detroit, Michigan USA

Graduate student Projects:

"Automatic theft detection for vehicle safety using Driver Face Recognition using Camera module, emulation of CAN modules and Observing the thermal conditions(sensors Humidity,Temperature and Ultrasound) using IoT" with Android UI, CAN bus and Bluetooth. Arduino Micro controller and Raspberry Pi(Linux platform) is used. Vector CANoe Software is used to emulate 3 CAN node system.

Project on FPGA system for Risk Management and Safety in Autonomous Vehicular Systems. BASYS and ALTERA FPGA Boards are used for implementation. Xilinx and Vivaldo is used for simulation and placement.

Temperature acquisition from the environment and calculating its variation using NI Labview.

"A/D and D/A converter using SAR architecture in 45nm for low power bio-medical applications"

Full RTL to GDSII

ow for Generalized Pipeline Array (Microprocessor Architecture) for IC chip fabrication to MOSIS.

SOI MEMS and Micro

uidic Fabrication Project in Microelectronic Fab Lab in WSU.

MATLAB techniques are used to nd solutions for di erent regression and optimization problems in Fuzzy Systems.

Indian Institute of Technology, Roorkee, Uttarakhand, India Teaching Assistant : Digital/Analog Electronic Circuits Lab, Advanced Electrical Design Lab(Aug. 2013 { Jun. 2014).

Graduate student Projects: Analog VLSI Design-A/D Convertor using SAR Architecture in 45nm for Low Power Biomedical Applications, Analog Circuit Design- Two Stage Op Amp Design, Digital Circuit Design- Tra c Light Controller Algorithm and Implementation Honors and

Certificates Coauthored the paper on this procedure and the submission is titled "Development of a Fuzzy Chip for Mobility Assessment" with Dr. Aby K George and is published.

Coauthored the Paper "DNA Nano-Circuits for Programmable Biological Devices" submitted to Transactions on NanoBioscience by Prof. Athanasios Vasilakos which is under review.

Holds the Course completion certi cates from CADENCE in Virtuoso Schematic drawing, ADE, Verilog Language and Applications.

Graduate Teaching Assistant Scholarship from Wayne State University from 2016 { 18

MHRD Scholarship, 2012{2014, from Government of India

Cleared Graduate Aptitude Test in Engineering (GATE) from India with a 99.96 percentile References Academic:

Dr. Harpreet Singh, Professor(My adviser), Wayne State University, ******@***.*****.***

Dr. Amar Basu, Associate Professor, Graduate Program Director WSU, ****.****@*****.***

Dr. Syed Masud Mahmud, Professor (My Project adviser on Vehicle Embedded Systems) WSU, *********@*****.***

Dr. Lubna Alazzawi, Senior Lecturer WSU, *******@*****.***

Dr. Sudeb DasGupta, Professor IIT Roorkee (My Project Adviser at IITR), ********@****.**.**

Dr. Lyla B. Das, Associate Professor NIT Calicut (My Project Adviser at NITC), ***@****.**.** Industry:

Muhammad Amasha, Software Team Leader, Valeo North America, Inc, ********.******@*****.***

Vinayakam Subramanian, Area Tech Manager(My manager when I was working at Ansys) Ansys Inc., *********.*@*****.***

Sankar Ramachandran, Area Tech Manager Ansys Inc., ******.************@*****.***

Jafar Sadiq, Analog Design Engineer(We Worked Together), Texas Instruments, ***.*****@*****.*** My Website

Contact this candidate