Mohamed Ali Gaffar Abd Elrahman

Electrical Engineer – PMP – RMP

PERSONAL DETAILS

Date of Birth: 22nd February 1984

Nationality: Sudanese

Based: USA – Till 23 April 2020

Driving License: Saudi, & Sudanese

Visa status: Need Visa (Sudanese) – Currently visit visa B1/B2 for 6 month

Notice Period: Ready to join after 03.04.2020

Mobile: +1-515-***-****

WhatsApp: +974********

Email: adchtl@r.postjobfree.com

Skype : mohamedali953

EDUCATION

B.Sc. Electrical Engineer – (Control & Instrumentation) (2005)

Sudan University of Science & Technology (Sudan).

M.Sc. Electrical Engineer (2010)

Sudan University of Science & Technology (Sudan). Specialization (microprocessors and control)

EMPLOYMENT HISTORY

TYPSA – Riyadh, Saudi Arabia Feb 2013 – OCT 2018

Role: Electrical Technical Support Engineer

Duration: Nov 2017 – Oct 2018

Project: Al-Buwayb 1 Station

Client: National Water Company (NWC)

A Rehabilitation Project for the Electricity Building at Al-Buwayb Water Station

Most relevant works: I was attached to NWC-RCBU projects management department and participated in project of Al-Buwayb Station. RCBU (Riyadh City Business Unit) is a subsidiary of NWC (National Water Company), which is the governmental authority that is responsible of water service in Saudi Arabia.

I was responsible for coordinating and performing the following activities:

Main activities and responsibilities: Support Resident Electrical Engineer for, managing & preparing all Electrical work & documents

Main Job features:

Preparing initial BOQ & RFP for electrical projects related to NWC-RCBU projects

Monitoring projects processes and progress.

Reviewing submittals and recommending decisions.

Preparing meetings and its agenda with NWC staff or outside parties including and creating developing the MOM's.

Reviewing contracts and proposing controlling actions for conflicts and problems on contracts.

Participating in site visits and inspections.

Managing projects handover and client acceptance processes.

Managing coping activities on troubled projects.

Providing RCBU project manager by technical support and consultation advises.

Role: Electrical & Instrumentation Engineer

Duration: Feb 2017 – Oct 2017

Project: SAAD LOT 4

Client: National Water Company (NWC)

Supervision services for reinforcing the Riyadh city potable water strategic storage capacity projects and Supervision Services for SAAD Projects” SAAD LOT 4

Most relevant works: LOT 4: Reverse Osmosis Water Treatment Plant & Reservoirs

Water Treatment Plant (Product water 400.000 m3/day & TDS 1100 mg/l), raw water reservoirs (2 x 25,000 m3), and brine disposal facilities.

Construction Budget: 125,200,000.00 USD

Main activities and responsibilities:

Support Resident Electrical Engineer for inspecting all Electrical work in site.

Main job features:

Inspection of all electrical Equipment if is it matching with Saudi Organization Standards & tender Design

Site Acceptance Test SAT for all control system (PLC – SCADA – Control system).

Review & supervise instrumentation design (Hook up, PID…& system Architecture.)

Solve interface with Mechanical & Electrical

Acceptance of RFIs & MIRs

Final Acceptance Test

Verification as per certificates and specification.

Supervise and monitor contractor work.

Recommended & approved spare part list

Review As-built drawing and O&M manual as per Clint

Role: Electrical Engineer / inspector

Duration: Apr 2014 – Jan 2017

Project: SAAD LOT 2 & 3

Client: National Water Company (NWC)

Supervision services for reinforcing the Riyadh city potable water strategic storage capacity projects and Supervision Services for SAAD Projects” SAAD LOTS 2 & 3

Most relevant works:

LOT 2: Well Field – Submersible Pumps, Riser Pipes & Sensors.

Supply and installation of submersible pumps, motors, riser pipes, discharge line, water level sensors and instruments, electrical rooms and transformers for 80 wells, capacity (364,000 m3/day).

Construction Budget: 58,391,030.94 USD

LOT 3: Well Field – Network Pipelines & Well Chambers

Supply and installation of 111 km ductile iron network pipelines (Ø1200, 1000, 800, 600 and 300), valves and instrumentation, chambers, administration and storage buildings, and surge vessels protection.

Construction Budget: 52,800,000.00 USD

Main activities and responsibilities: Support Resident Electrical Engineer for inspecting all Electrical work in site.

Main job features:

Inspection of all electrical Equipment if is it matching with Saudi Organization Standards & tender Design

Acceptance of RFIs & MIRs

Final Acceptance Test

Inspection of received a material that has been purchase by contractors.

Verification as per certificates and specification.

Supervise and monitor contractor work.

Recommended & approved spare part list

Review As-built drawing and O&M manual as per Clint requirement

Role: Electrical Engineer

Duration: Feb 2013 – Mar 2014

Project: First Stage Projects for Riyadh Water Supply Master Plan.

Client: National Water Company (NWC)

Most relevant works: A total of 11 contracts with a construction budget of approximately 625.33 million dollars consisting in the review of the design and construction supervision of several steel concrete tanks, pumping stations and transmission lines. The main quantities are listed below:

1,280,000 m3 in tanks (600,000 m3 steel tanks – 680,000 m3 concrete tanks).

4 pumping stations with a total pumping capacity of 1,010,000 m3/day.

390 km of transmission pipelines (221 km of Ductile Iron in diameters from 300 to 1200 mm – 169 km of Carbon Steel in diameters 1400 to 2400 mm).

Main activities and responsibilities: Support Resident Electrical Engineer for inspecting all Electrical work in site.

Main job features:

Inspection of all electrical Equipment if is it matching with Saudi Organization Standards & tender Design

Site Acceptance Test SAT

Acceptance of RFIs & MIRs

Final Acceptance Test

Inspection of received materials that have been purchase by contractors.

Verification as per certificates and specification.

Supervise and monitor contractor work.

Review As-bulit drawing and O&M manual as per Clint requirement

Sudanese Thermal Power Generation (STPG) – Khartoum, Sudan Nov 2006 – Oct 2012

Electrical (Control & Instrument) Engineer

Project: El FULAA Thermal Power Station.

Most relevant works: Preparations of El FULAA Power Station 3x135 MW (Tendering, kickoff meeting, design).

Main activities and responsibilities: Control & Instrumentation C&I Engineer with Experience due to diligence reports, concept studies, bid specifications, bid evaluations, detail design, engineering, design approval commercial follow-up, supervision of erection and commissioning and training clients personnel concerning the instrumentation and control equipment of power plants.

Main job features:

Basic Engineering

Commissioning of control Automation (DCS) & SCADA.

Inspection of all electrical Equipment if is it matching with International Standard & Tender Design.

CERTIFICATE

Certified Project Management Professional (PMP) ®

PMP® #2147778

Certified RISK Management Professional (PMI-RMP) ®

RMP® Number:2646715

ADDITIONAL TRAINING

Project Management Professional (PMP)-Preparation course- May.2010

Sudanese Centre for Engineering and Environmental Studies (SCEES), Sudan.

Sensor Technology For Automation - Nov 2010 – Jan 2012

Central Institute of Tool Design, Hyderabad, India

Control & Electronics for Engineers – Dec.2006 -Jan 2007

National Electricity Corporation (NEC), Khartoum, Sudan

Electrical Installation in Oil Industry- July. 2005

Sudan Petroleum Corporation-Petroleum Center (PTC), Sudan

Electrical Power Station, Transmission Lines, Electric control And Safety Sep.2003- Oct.2003

National Company for Construction & Development (Egypt).

Operation & maintenance in Thermal Power Station – Jan.2010

EGCO group (Thailand)

General SKILLS

Computer software.

Leadership & Good attitude & Good communications skills.

Having an open mind

Excellent knowledge of MS. Office– windows-internet.

Fluent English writing & speaking

GENERAL EXPERIENCE

Mr. Mohamed Ali Gaffar is MSc. Of Electrical Engineer – control, with 14 years’ experience in supervision, planning of Electrical & instrumentation engineering projects, including substation, power plant, water treatment plants and water tanks for private companies and agencies.

He has vast experience in management of large-scale projects encompassing engineering design and supervision of works, contract administration, budgetary control and contract management.

TECHNICAL ASSOCIATIONS

Member of Project Management Institute (PMI)- Member ID:1975878

Member of the Saudi Engineering Council as professional Engineer

Member of the Sudanese Engineering Council.

Member of the Sudanese Engineering Society.

Contact this candidate