QA QC Engineer/Inspector

FELICIANO G. AMADOR JR.

** ******** **, *.*. Almanza, Almanza Dos, Las Pinas,

Philippines

Mobile Number: +974-****-****

E-mail Address: ***********@*****.***.**

QA/QC ENGINEER

** ***** *****ience in the field of construction, 19 years of which were spent performing the task of Quality Assurance/ Quality Control Engineer; conversant with the American and British Standards (ASTM, ACI, BS, etc.) for testing of various construction materials; Registered Civil Engineer since 1998 after passing the Philippine Licensure Examination for Civil Engineers given in the same year.

OBJECTIVE:

Proactive and energetic individual with a positive attitude to work, dead-line focused, and experienced in conducting checks to ensure that the required quality is achieved.

WORK EXPERIENCE:

February 2016 to Present

Company: Arabtec Construction Co.

Project: Mshreib Downtown Doha, Phase 2

Country: State of Qatar

Position: QA/QC Engineer

Duties and Responsibilities:

i.Conduct and coordinate inspection of materials delivered to site and make sure that it is as per approved material submission and has complete documents such as certificate of origin, mill certificates or test results

ii.Conduct preparatory site inspection prior to submission of CRFI’s (Contractor’s Request For Inspection) to Engineers and coordinate quality inspections with all the site sub contractor

iii.Coordinate/arrange inspection with the Engineer to secure approval of work thru CRFI’s

iv.Prepare non-conformity reports (NCR’s) when necessary and if required undertake a remedial response for NCR’s issued by the “Client’s Representative”.

v.Prepares “Red Line Drawings” requirement for the preparation of “As-Built Drawings”

vi.Notify the Engineers for all snags that are “Resolved”, thru SnagR application, to enable them to review and “Close” the issue/s.

March 2012 to February 2016

Company: Arabtec Saudi L.LC.

Project: Saudi Arabia National Guard Housing Project (5000 villas)

Country: Kingdom of Saudi Arabia

Position: QA/QC Engineer

Duties and Responsibilities:

i.Maintains QA/QC documents and organized them for easy traceability which is proven to be useful during internal/external audits, monthly billing, and handing over; participate in the site internal and external audits.

ii.Prepare CRFI forms for different stages of work to clearly show the items to be inspected

iii.Prepare a tabulation of weekly and monthly status of CRFI’s (Request For Inspection) and NCR

iv.Assist in the closure of non-conformity reports (NCR’s) and site observation notices (SON's).

July 2006 – August 2011

Company: Ahmed Mansoor Al-A’ali Co. BSC (c)

Project: Reef Island Development – Infrastructure Works and District Cooling Services

Country: Bahrain

Position: QA/QC Engineer

Duties and Responsibilities:

i.Implement the QA/QC management system at site and Monitor the implementation of the approved Project QC Plan

ii.Maintains QA/QC documents and organized them for easy traceability especially during internal/external audits and handing over, assure all technical documents relative to site quality control are current status and participate in the site internal and external audits.

iii.Conduct regular site inspections to ensure all works that will be out of view are accepted by the Engineer and verify that the quality related site activities are in accordance with the applicable codes and standards.

iv.Conduct and coordinate inspection of materials delivered to site and make sure that it is from the approved source and has complete documents such as mill certificates, test results, and performance testing.

v.Conduct preparatory site inspection prior to submission of RFI’s (Request For Inspection) to Engineers and coordinate quality inspections with all the site sub contractor and laboratories for al testing on site. Prepares RFI and arrange inspection with the Engineer to secure approval of work.

vi.Review the Customer's specification and prepare Project QC Program, Inspection Test Plans, O&M Manuals (Vacuum Sewer, STP, Irrigation System)

vii.Review Method Statement to verify compliance with the Project Specification or with relevant Government and other related Standards

viii.Prepare non-conformity reports (NCR’s) when necessary and if required undertake remedial responses.

ix.Prepare and coordinate Material Submittals for the review and approval of the Engineer

x.Assist the coordinator during the “Testing and Commissiong” of Vacuum Sewer, STP (Chemical Plant) Irrigation System (Rainbird), and District Cooling Plant

April 2004 – July 2006

Company: Archirodon Construction Company (Overseas) S.A.

Project: Construction of Shaikh Zayed Bridge, Contract 3

Country: United Arab Emirates

Position: QA/QC Engineer

Duties and Responsibilities:

i.Make sure that the company's policies and procedures with respect to the quality of works stated in the manual are being observed to comply with the international standards

ii.Maintains QA/QC documents and organized them for easy traceability especially during internal/external audits

iii.Participate in the preparation of Quality Control Program and Inspection Test Plan

iv.Conduct inspection of materials delivered to site and make sure that it has complete documents such as certificate of origin, mill or test certificates

v.Conduct preparatory site inspection prior to submission of RFI’s (Request For Inspection) to Engineers

vi.Prepare and issue non-conformity reports (NCR’s) when necessary

vii.Coordinate/arrange inspection with the Engineer to secure approval of work with RFI’s

viii.Ensure frequency of testing of materials is observed to comply with the project specification and relevant standards

ix.Prepare Material Submittals for the review and approval of the Engineer

x.Monitor and adjust concrete mix workability to suit actual field conditions while maintaining its strength

November 2001 – December 2003

Company: Baque Corporation

Project: Pasig River Rehabilitation Projects, Sub-Package 1D

Country: Philippines

Position: QA/QC Engineer

Duties and Responsibilities:

i.Ensure all materials incorporated in the project are approved by the Engineer

ii.Monitor frequency of testing used in the project (such as reinforcing steel bars, cement, aggregates, admixture) to assure compliance with the Specifications and governing standards

iii.Adjust concrete mix design to suit actual field condition

iv.Conduct preparatory site inspection prior to submission of RFI’s (Request For Inspection) to Engineers

v.Arrange inspection with the Engineer to secure approval of work with RFI’s

vi.Prepare non-conformity reports (NCR’s) when necessary

vii.Supervise pouring of concrete

January 2001 – November 2001

Company: Baque Corporation

Project: 65 Ha. Site Development (BCDA Property). Construction of Roads and

Drainage; Ph 1-B

Country: Philippines

Position: Quality Control Engineer

Duties and Responsibilities:

i.Prepare Quality Control Program, Minimum Testing Requirements, and Material Testing Monthly Report

ii.Conduct laboratory and field tests on soil, asphalt, and concrete samples

iii.Supervise laying of reinforced concrete pipe culverts and construction of manholes

November 2000 – January 2001

Company: Baque Corporation

Project: Construction of Philippine Army Communication Building

Country: Philippines

Position: Quality Control Engineer

Duties and Responsibilities:

i.Conduct tests on different materials such as concrete aggregates, cement, hardened concrete, and reinforcing steel bars

ii.Coordinate with the batching plant regarding workability and quantity of concrete to be delivered

September 2000 – November 2000

Company: Consuelo Builders Corporation

Projects: Improvement of Bayan-Bayanan Drainage Outfall, Marikina City

Country: Philippines

Position: Field Engineer

Duties and Responsibilities:

i.Supervise and handles people involved in the actual construction of the project

ii.Prepare quantity take-off of all materials neede for the project

iii.Coordinate with inspectors/consultants regarding re-designs of the plans

1998 – May 2000

Company: William Uy Construction Corporation

Projects: Circumferential Road 5 (C-5), Radial Road R1 to R4

Country: Philippines

Position: Quantity Engineer

Duties and Responsibilities:

i.Prepare quantity take-off of all materials needed in the project and work schedule

ii.Prepare Monthly progress Billing

iii.Coordinate with the consultants regarding revisions of approved plans and how to implement works accordingly

December 1997 – 1998

Company: William Uy Construction Coporation

Projects: Southern Tagalog Arterial Road / South Luzon Expressway Extension Toll

Project

Country: Philippines

Position: Office Engineer

Duties and Responsibilities:

i.Prepare quantity take-off of all materials needed in the project

ii.Prepare Bar Chart and S-Curve using Excel

EDUCATIONAL ATTAINMENT: Bachelor of Science in Civil Engineering

MIT - 1997

AFFILIATION: Member – Philippine Institute of Civil Engineers (PICE)

OTHER SKILLS: Good Communication Skills, Computer Literate (MS Office, MS Project, AutoCAD)

FELICIANO G. AMADOR JR.

Passport No. P6500365A

Contact this candidate