EVARISTO ALMINE PRIMA
**** ***. ****** **. ************ Sub.San Juan Cainta, Rizal
Landline: +632-******* Mobile: +639*********/+639********* Email:adc8vm@r.postjobfree.com
SKYPE: evarprima
POSITION: Rigger/Rigger Foreman/Telecom Rigger
TRAINING & SEMINARS:
COP- Lifting Operation Training
Conducted by: Leighton Contractors (Asia) LTD. Caloocan City, Philippines
January 16, 2020
COP- Working at Height Training
Conducted by: Leighton Contractors (Asia) LTD. Caloocan City, Philippines
October 11, 2019
Rigging, Banksman and Slinger Operations
Conducted by: Site Skills Training, Clark Pampanga, Philippines
May 22-25, 2019
Task Risk Assessment Cert. No. 5f12464b-5d43-4e69-bfc7-6b24b38e053c
Conducted by: Atlas Knowledge
February 10, 2019
LOLER (Lifting Operations and Lifting Equipment Awareness) Cert. No. d7c85181-635e-4bc1-bfbd-0e0f164af58
Conducted by: Atlas Knowledge
February 09, 2019
Asbestos Awareness Cert. No. 218*****-****-b7c4-810a56c59e31
Conducted by: Atlas Knowledge
February 09, 2019
TBOSIET (Tropical Basic Offshore Induction and Emergency Training)
Conducted by: IDESS Maritime Training Center Subic, Philippines-Cert. No. 00565906090219043
February 05-09 2019 Reg. No. EPAI-00394
Working at Heights
Conducted by: IDESS Maritime Training Center Subic, Philippines- Cert. No. WAHC-0044-19
February 09, 2019 Reg. No. EPAE-00439
Rigging NC1 Cert. No. CLN-NQ-1765751 Valid Until: April 26, 2022 (TESDA Manila, Philippines)
MEFA (Medical First Aid) Cert. No. MEFA005AM-1165, Registration No. AMTCI001497853-012017
Conducted by: Altitude Maritime Training Center, Kalaw, Manila Philippines
January 30-02, Feb. 2017
BOSH (Basic Occupational Safety and Health) (40 hrs.)
Conducted by: Peoples 360, Balintawak Quezon City Philippines – Cert. No. BOSH-121*-**-*****
December 12-16, 2016
OSHA BASED GENERAL INDUSTRY (30hrs)
Conducted by: Trainer and Trainers, Alabang Philippines– Cert. No. 2016-03-OSHA169
March 30-02 April 2016
SICW (Safety Induction for Construction Workers)
Conducted by: ASIA CONSULTANTS-CIDB Malaysia- Cert. No. ASIA/CIDB180415/013
April 18, 2015
Basic Rigging and Lifting Course
Conducted by: ASIA CONSULTANTS-CIDB Malaysia- Cert. No. ASIA/SW/14/0206
March 22-23, 2015
Excelift Overhead Crane Operator Training - October 23, 2015
Conducted by: JGC/PETRONAS LNG TRAIN 9 Project Bintulo Sarawak, Malaysia
Conducted by: NOTIP (Nautical Options Training Institute of the Philippines)
Certificate No. 111********** Issued January 28, 2011
Basic Safety Training and Instruction
Conducted by: Maritime Training Center of the Philippines, Manila, Philippines
Certificate No. 14-442585B, SN 032061, Issued: August 25, 2010
Rigger Certified Trade Test B+
PHILASIA, Sta. Ana Manila, Philippines
September 01, 2010
Craft Safety Training “Rigging & Lifting”
Daewoo E&C Co. LTD LNG Sakhalin 2, Russia/ December 14, 2007
Company: LEIGHTON CONTRACRORS (Asia) LTD.
Position: Rigger
Project: NLEX Harbor Link Segment 10 and R10 Exit Ramp Project
Contractor: Leighton Contractors (Asia) LTD.
Location: C Apostol st. Brgy. 54 PNR Compound Caloocan City
Date: August 16, 2019 – April 30, 2020
JOB DESCRIPTION
Lifting of skyway support beam using 700 tons crawler crane, loading and unloading of concrete pad, scaffold, timber, braces, tower and other construction materials
Erection of concrete girders, installation and removal of lower and upper form
Maneuvering of chain blocks and assisted signaling to crane operator
,
Company: YUHANTECH PHILIPPINES INC.
Position: Rigger
Project: Power Plant SBPL 500 Megawatts
Contractor: Daelim Philippines
Location: Cagsiay 1 Mauban, Quezon Philipppines
Date: August 22, 2018 – January 09, 2019
JOB DESCRIPTION
Maneuvering of chain blocks, erection of beams, support, traces using mobile crane and tower crane.
Alignment of motor, rotor, erection of turbine, gate valves, pipes and other construction materials.
Company: DAE NIPPON CONSTRUCTION
Position: Rigger
Project: Reconstruction of Nippon Causeway
Contractor: Dae Nippon Construction
Location: South Tarawa, Republic of Kiribati
Date: September 07, 2017 – January 11, 2018
JOB DESCRIPTION:
Installing, alignment and welding of sheet pile
Assisted and signaling to crane operator for proper communication
Operating pile driver hammer 60 hertz and test rigging and lifting to ensure safety and reliability
Company: DAEWOO SHIPBUILDING and MARINE ENGINEERING/ AG&P
Position: Rigger
Project: Oil and Gas/Hook-up and Commissioning
Contractor: DSME (Daewoo Ship Building and Marine Engineering)
Location: Mapumeira Sul Offshore, Angola, Africa
Date: May 19, 2016 - November 31, 2016
JOB DESCRIPTION:
Assisted mooring, bunkering and cleaning of deck area
Erection of gate valves, strainers, spool pipe, supports, GRE pipes and structural beams
Loading and unloading of construction materials, containers coming from the supply vessel and from deck, assisted crane operations cleaning, housekeeping and arrangement of materials
Monorail load testing from 1 ton to 24 tons, and assisted mooring from barge to platform
Erection of gas turbine generator and air fan, manual operation and maneuvering of chain blocks,
Assisted bunkering from barge to platform & provide safe lashing on materials and equipment
Familiar with hand signal and use of hand held radio to communicate crane operator.
Work under safety regulations in the construction site and cleaning, painting and do housekeeping
Inspection one by one of all lifting equipment especially sling wire and sling belt and check lifting conditions
Company: NIPPON EXPRESS Co. LTD.
Position: Fitter/Rigger
Project: Oil and Gas
Contractor: JGC (Japan Gas Company)
Location: PETRONAS LNG TRAIN 9 Project, Bintulo Sarawak, Malaysia
Date: February 18, 2015 - February 17, 2016
JOB DESCRIPTION:
Erection of structural, pin fan cooler, pressure vessel, beams, supports and traces
Heavy lifting operations such as vessel installation, gas turbine generator, stabilizer motor generators, gate valves, piping and other heavy equipment
Operated/install overhead crane 5-70 tons, assisted crane operator for signaling using two radio and maintain safety precautions, fitting and lay outing
Assemble and dismantle of crawler crane 250-1700 tons.
Installation of melapack and catalyst. Installation of platform and ladder and heat ex changer evaporator
Maneuvering of chain blocks
Company: DAEWOO E&C
Position: Rigger Foreman
Contractor: CHIYODA-JGC JOINT VENTURE
Project: Oil and Gas
Location: PNG-LNG Papa-Lea lea Port Moresby, Papua New Guinea
Date: July 4, 2011- May 26, 2014
JOB DESCRIPTION:
Pipe rack installation, and erection of structures, beams, support, traces and pipe spool
Assisted vessel installation, maneuvering of chain blocks, assemble/disassemble of crawler crane
Responsible for signaling to operator, executed toolbox meeting & safety instruction, toolbox talk, before starting to work is mandatory of working parties for safety reasons
Keeps and maintains tools and equipment in good operational condition
Assemble and dismantle of crawler crane and tower crane
Signal or verbally direct workers engaged in hoisting and moving loads in order to ensure safety of workers
Rectification work cutting, fitting, lay outing, and bolt tightening
Maneuvering of chain blocks, familiar with all hazards and safety precautions.
Splice rope and wire cables to make or repair slings and tackles.
Assisted crane operations for loading and unloading of container, erection of structures, beams, support, gate valves
Use pads to avoid damage of sling wire sling belt specially he a sharp edges.
Warehouse man and loading and unloading of pile operating of s-150-s-200 pile drive hammer
Installing alignment of t-beams and hammer stock precast weighing up to 60 tons
Provide lashing on materials and equipment on barge to ensure they are secured when barge moving
Company: KAINAN CORPORATION
Position: Rigger
Contractor: COJAAL- CONTURTIUM JAPANESE ALGERIA
Project: Tunnel and Bridges
Location: Chanter el Harrouch, Camp 05/06 Skikda, Algeria Africa
Date: August 12, 2009 - July 30, 2010
JOB DESCRIPTION:
Erection of concrete girders and preparation of plates for safe work crane operations.
Connect columns, beams and girders with bolts align structural steel members in position for permanent riveting and bolting, and Assemble and dismantling of crawler crane 200-250 tons.
Hoist steel beams, girders and columns into place using cranes to lift and position structural steel members
Attaches load with grappling devices such as loops, wires, ropes and chains to the crane hook, Installation of girders and Maintains tools and equipment in good operational condition, responsible of loading, unloading and installation of concrete girder both bridge and tunnels.
Fabricate, set up and repair rigging, supporting structures, hoist and pulling gear using hand and power tools, work under safety regulations in construction site and maneuvering of chain blocks.
Company: REDIS CONSTRUCTION AFRICA
Position: Rigger/Scaffolder
Contractor: TENKE FUNGURUME MINING
Project: Mining
Location: Congo, Africa
Date: September 09, 2008 - April 04, 2009
JOB DESCRIPTION:
Assemble and dismantling scaffolding structures to provide safe working flat forms, together with steel pipes, support, beam, braces and clamps to support scaffolding, work at indoor and outdoor in extreme heat and cold at various heights
Erection and maneuvering of chain blocks, daily tool box talk before start lifting operation.
Coordinate to lifting supervisor and material controller from day to day rigging activities in our
Prepare rigging equipment’s for lifting jobs such as shackles, slings & other related lifting equipment’s for incoming & outgoing materials, perform other jobs assigned to by immediate superior.
Responsible maintain proper signals in actual lifting
Erection of valves, tanks, pipe rack installation, manual rigging, erection of beams and supports
Follow safety rules and regulations to maintain safe working load.
Company: DAEWOO E&C Co. LTD.
Position: Rigger
Contractor: CHIYODA-TOYO SAKHALIN DEVELPOMENT CORPORATION
Project: Oil and Gas
Location: Korsakov Sakhalin Island, Russia
Date: December 25, 2006 - June 25, 2008
JOB DESCRIPTION:
Coordinates and give directions to crane operator on when to lift and move loads from place by using signals, Test rigging to ensure safety and reliability.
Responsible for assembling and installing rigging gear such as cables, ropes, pulleys and winches to lift, position machinery, structural steel and other heavy objects
Examine objects to be moved, estimate their size, shape and weight and decide on the type of equipment necessary.
Assemble and dismantle crawler cranes 200-250 tons; erect pressure vessel, piping tanks, columns, mouth motor frame, tanks, pipes, gate valves, heat ex-changer evaporator.
Rectification work cutting, fitting, lay outing, and bolt tightening
Use pads to avoid damage of sling wire sling belt specially he a sharp edges.
Coordinates and gives directions to crane operator on when to lift and move loads from one place by using signal
Loading construction materials likes bundle of steel bars, angular bars, channel bars, mesh wire,
Keeps and maintains tools and equipment in good operational condition
Daily report product activities and responsible for loading and unloading of construction materials
Select cables, ropes, pulley, wenches and blocks regarding the weight and size of load to be moved
Use pads to avoid damaged of sling wire, sling belt especially if the object has sharp edges
Knowledge of various hand signal and safety lifting tackle with care.
Maneuvering of chain blocks and familiar of all safety hazards and precautions
Company: BF METAL CORPORATION
Position: Rigger
Project: Structural/Building
Location: Cainta Rizal, Philippines
Date: January 26, 2002 – December 6, 2005
JOB DESCRIPTION:
Erection and responsible for loading and unloading of construction materials such like, bundles of steel bar, bundle of angular bar, channel bar, bundle of mess wire, bundle of fly wood and timber, pipes, spool, structural, generator, welding machine, responsible signaling to crane operator and erection of structural and pre-cast.
Maneuvering of chain blocks
Company: PHILIPPINE LONG DISTANCE TELECOM COMPANY (PLDT)
Position: Installer/Radio Telecommunication Technician
Project: Telecommunication
Location: PLDT Towers Ayala Ave. Makati City Philippines
Date: March 23, 1997 – December 16, 1999
JOB DESCRIPTION:
Set up and maintain device and equipment that carry communication signals such as transmission and telephone lines
Installation of cables, parabolic dish, repeater, antenna and transmitter
Construct and repair of equipment used for electronic communications and cables
Installation of cables and telephone lines
EDUCATIONAL BACKGROUND:
Tertiary: Asian College of Science & Technology (ACSAT) Course: General Radio Communication Operator
Cubao, Quezon City, Philippines Graduated: March 28, 1996
Holder: General Radio Communication Operator License
Radio Telephone Operator 1st class NTC (National Telecommunications Commission) Manila, Philippines
PERSONAL DATA:
Date of Birth: October 26, 1973 Passport No.: P1141677A
Place of Birth: Silago, So. Leyte Philippines Valid Until: December 13, 2021
Age: 46 yrs old Seaman Book No.: BO913828
Height: 5’5” Valid Until: November 06, 2019
Weight: 75 kgs. SRC: Reg No. NCR0103011
Civil Status: Married Nationality: Filipino
TIN # 156-***-***-*** PhilHealth: 19-089531523-4
PAG-IBIG: 121*-****-**** SSS: 0003-9864177-3
REFERENCES:
Miss Beneth Domingo Representative Kainan Corporation/ Manila Office Cp. # 099********
Mr. Ferdinand Agoho Rigging Supervisor/Yuhantech Philippines Inc. Cp. # 092********
Mr. Ramer Bombales OFW Rigger Cp. # 094********
I hereby certify that the above information are true and correct to the best of my knowledge and belief.
Evaristo A. Prima
Applicant